Search found 11 matches
- Thu, Oct 25 2012, 4:57AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Flycutting Program
- Replies: 1
- Views: 3054
Flycutting Program
I had a strange thing happen yesterday, After running parts yesterday, I decided to flycut the waste board, when I loaded the program I noticed that It had been over written with the last program I ran (see attached). Can anybody explain to me what happened? Can someone send me a copy so I can repla...
- Mon, Oct 15 2012, 8:59AM
- Forum: Thermwood 3-Axis Machinery
- Topic: V CARVE
- Replies: 28
- Views: 31246
Re: V CARVE
Josh, thank you for the post.
I did finally get it to work, the file was there as Josh Post 120211 not what I renamed it as.
Is there a way to get it to read the waste board thickness?
Thanks again,
John
I did finally get it to work, the file was there as Josh Post 120211 not what I renamed it as.
Is there a way to get it to read the waste board thickness?
Thanks again,
John
- Thu, Oct 11 2012, 12:27PM
- Forum: Thermwood 3-Axis Machinery
- Topic: V CARVE
- Replies: 28
- Views: 31246
Re: V CARVE
Ok Josh, I did change the ext. put it in V carve.....still don't see it.
I tried rebooting the system, nothing.
I can see it in there when I look in the c drive progam data ect.
John
I tried rebooting the system, nothing.
I can see it in there when I look in the c drive progam data ect.
John
- Thu, Oct 11 2012, 9:39AM
- Forum: Thermwood 3-Axis Machinery
- Topic: V CARVE
- Replies: 28
- Views: 31246
Re: V CARVE
Josh, I can't change the file extension.
I did rename it and put it where you said, I don't see it( it still comes up as a txt doc.
Is there something I am missing?
John
I did rename it and put it where you said, I don't see it( it still comes up as a txt doc.
Is there something I am missing?
John
- Thu, Oct 11 2012, 6:23AM
- Forum: Thermwood 3-Axis Machinery
- Topic: V CARVE
- Replies: 28
- Views: 31246
Re: V CARVE
Brad, thank you for your response to my post. The post processor I am using (in v carve) is Thermwood ATC 91000 (inch)(*.n ) When I create the G code(in V carve) I have to set the Z shift before sending it to the machine.(Program Name-CD Header final 2) Below is some of the code it put out (Program ...
- Wed, Oct 10 2012, 12:53PM
- Forum: Thermwood 3-Axis Machinery
- Topic: V CARVE
- Replies: 28
- Views: 31246
V CARVE
Just purchased V Care pro, parts are being machined towards the center of the table.
Is there anyone using V carve on there Thermwood who can help me?
John
Is there anyone using V carve on there Thermwood who can help me?
John
- Tue, Dec 27 2011, 5:44AM
- Forum: eCabinet Systems Software
- Topic: Angled Cabinet
- Replies: 11
- Views: 12091
Re: Angled Cabinet
Kerry,
The cabinet you created looks good, see attached results when I put a fixed in the cabinet.
How do I get around that?
John
The cabinet you created looks good, see attached results when I put a fixed in the cabinet.
How do I get around that?
John
- Fri, Dec 23 2011, 11:09AM
- Forum: eCabinet Systems Software
- Topic: Angled Cabinet
- Replies: 11
- Views: 12091
Re: Angled Cabinet
Kerry,
when you say extend the two ends in length, how does that translate in the software?
Is it right front, left front, right back, left back etc.
Also I take the word graphically to mean I won't see it?
Thanks,
John
when you say extend the two ends in length, how does that translate in the software?
Is it right front, left front, right back, left back etc.
Also I take the word graphically to mean I won't see it?
Thanks,
John
- Fri, Dec 23 2011, 10:30AM
- Forum: eCabinet Systems Software
- Topic: Angled Cabinet
- Replies: 11
- Views: 12091
Re: Angled Cabinet
Kerry,
Am I looking at the front of the cabinet or the back?
If it is the back I will have issues placing molding on.
John
Am I looking at the front of the cabinet or the back?
If it is the back I will have issues placing molding on.
John
- Fri, Dec 23 2011, 3:40AM
- Forum: eCabinet Systems Software
- Topic: Angled Cabinet
- Replies: 11
- Views: 12091
Re: Angled Cabinet
See attached image
Thanks,
John
Thanks,
John
- Thu, Dec 22 2011, 8:42AM
- Forum: eCabinet Systems Software
- Topic: Angled Cabinet
- Replies: 11
- Views: 12091
Angled Cabinet
Does anybody know how to create a cabinet with angled sides?
Thanks,
John
Thanks,
John