Search found 11 matches

by John Tortorello
Thu, Oct 25 2012, 4:57AM
Forum: Thermwood 3-Axis Machinery
Topic: Flycutting Program
Replies: 1
Views: 3041

Flycutting Program

I had a strange thing happen yesterday, After running parts yesterday, I decided to flycut the waste board, when I loaded the program I noticed that It had been over written with the last program I ran (see attached). Can anybody explain to me what happened? Can someone send me a copy so I can repla...
by John Tortorello
Mon, Oct 15 2012, 8:59AM
Forum: Thermwood 3-Axis Machinery
Topic: V CARVE
Replies: 28
Views: 31008

Re: V CARVE

Josh, thank you for the post.
I did finally get it to work, the file was there as Josh Post 120211 not what I renamed it as.
Is there a way to get it to read the waste board thickness?

Thanks again,
John
by John Tortorello
Thu, Oct 11 2012, 12:27PM
Forum: Thermwood 3-Axis Machinery
Topic: V CARVE
Replies: 28
Views: 31008

Re: V CARVE

Ok Josh, I did change the ext. put it in V carve.....still don't see it.
I tried rebooting the system, nothing.

I can see it in there when I look in the c drive progam data ect.


John
by John Tortorello
Thu, Oct 11 2012, 9:39AM
Forum: Thermwood 3-Axis Machinery
Topic: V CARVE
Replies: 28
Views: 31008

Re: V CARVE

Josh, I can't change the file extension.
I did rename it and put it where you said, I don't see it( it still comes up as a txt doc.

Is there something I am missing?

John
by John Tortorello
Thu, Oct 11 2012, 6:23AM
Forum: Thermwood 3-Axis Machinery
Topic: V CARVE
Replies: 28
Views: 31008

Re: V CARVE

Brad, thank you for your response to my post. The post processor I am using (in v carve) is Thermwood ATC 91000 (inch)(*.n ) When I create the G code(in V carve) I have to set the Z shift before sending it to the machine.(Program Name-CD Header final 2) Below is some of the code it put out (Program ...
by John Tortorello
Wed, Oct 10 2012, 12:53PM
Forum: Thermwood 3-Axis Machinery
Topic: V CARVE
Replies: 28
Views: 31008

V CARVE

Just purchased V Care pro, parts are being machined towards the center of the table.
Is there anyone using V carve on there Thermwood who can help me?

John
by John Tortorello
Tue, Dec 27 2011, 5:44AM
Forum: eCabinet Systems Software
Topic: Angled Cabinet
Replies: 11
Views: 11788

Re: Angled Cabinet

Kerry,
The cabinet you created looks good, see attached results when I put a fixed in the cabinet.

How do I get around that?

John
by John Tortorello
Fri, Dec 23 2011, 11:09AM
Forum: eCabinet Systems Software
Topic: Angled Cabinet
Replies: 11
Views: 11788

Re: Angled Cabinet

Kerry,
when you say extend the two ends in length, how does that translate in the software?
Is it right front, left front, right back, left back etc.
Also I take the word graphically to mean I won't see it?

Thanks,
John
by John Tortorello
Fri, Dec 23 2011, 10:30AM
Forum: eCabinet Systems Software
Topic: Angled Cabinet
Replies: 11
Views: 11788

Re: Angled Cabinet

Kerry,
Am I looking at the front of the cabinet or the back?
If it is the back I will have issues placing molding on.
John
by John Tortorello
Fri, Dec 23 2011, 3:40AM
Forum: eCabinet Systems Software
Topic: Angled Cabinet
Replies: 11
Views: 11788

Re: Angled Cabinet

See attached image

Thanks,
John
by John Tortorello
Thu, Dec 22 2011, 8:42AM
Forum: eCabinet Systems Software
Topic: Angled Cabinet
Replies: 11
Views: 11788

Angled Cabinet

Does anybody know how to create a cabinet with angled sides?

Thanks,
John