Search found 58 matches
- Sat, Feb 14 2009, 2:52PM
- Forum: eCabinet Systems Software
- Topic: LDE to DXF?
- Replies: 11
- Views: 8649
Re: LDE to DXF?
I have been away from the board and eCabs a long time and just popped in to see what was new and this post caught my eye immediately. I have been using a competitive package for the last year or so for two major reasons: 1) I absolutely positively must have DXF out of line drawings for exactly the r...
- Sun, Jun 17 2007, 12:04AM
- Forum: Customer Images
- Topic: Amoire
- Replies: 8
- Views: 11597
Transtint dye stain on bare wood sealed with 1# extra pale solvent shellac. General Finishes WB Glaze Effects, vandyke brown with black to accent the distressing and in the corners and such, (the camera flash added more contrast than actual, it looks alot more subtle in person with natural light) an...
- Fri, Jun 15 2007, 8:28PM
- Forum: Customer Images
- Topic: Amoire
- Replies: 8
- Views: 11597
The pegs are not functional. The doors just have std 7/16 tenons. This was a budget project which is why it is all poplar and birch and doesn't have all of the curves of the set I was matching. The pegs were a pain but I could not figure out an easier way to do it. I started with a 1/2in square stoc...
- Fri, Jun 15 2007, 7:44PM
- Forum: Customer Images
- Topic: Amoire
- Replies: 8
- Views: 11597
Amoire
This is the last job I did in eCabs and the finished (and unfinished) piece. Had to match an existing bedroom set so I had to do the carvings myself. Amazing what you can do with poplar and birch ply, huh?
- Thu, Jun 07 2007, 12:50PM
- Forum: eCabinet Systems Software
- Topic: Thinking about a newer computer
- Replies: 20
- Views: 14506
- Thu, Jun 07 2007, 11:34AM
- Forum: eCabinet Systems Software
- Topic: Thinking about a newer computer
- Replies: 20
- Views: 14506
- Wed, Jun 06 2007, 12:54PM
- Forum: eCabinet Systems Software
- Topic: these might help
- Replies: 4
- Views: 4672
Excellent! That makes a big difference and works perfectly for me as we are doing the dovetails on a dovetail machine so all I really need is the material length to be correct, I don't need the dovetail data. So, I changed to blind dado and then to full dado and full dado made them a little bit smal...
- Tue, Jun 05 2007, 5:14PM
- Forum: eCabinet Systems Software
- Topic: these might help
- Replies: 4
- Views: 4672
Anybody have any memory saving tricks for dwr boxes (besides leaving them off)? I have found that adding dwr boxes, which I need, increases the size in huge increments for each box, from 300k for a cab with no dwr boxes to 2.5 MB for cabinet with 4 dwr boxes. Using a Hafele stainless pull I am only ...
- Mon, Jun 04 2007, 4:22PM
- Forum: eCabinet Systems Software
- Topic: Build 3 Bug....
- Replies: 18
- Views: 12824
- Mon, Jun 04 2007, 11:55AM
- Forum: eCabinet Systems Software
- Topic: Build 3 Bug....
- Replies: 18
- Views: 12824
- Fri, Jun 01 2007, 11:13AM
- Forum: eCabinet Systems Software
- Topic: Default settings for shelf holes
- Replies: 11
- Views: 7726
Ah ha! I think I understand now. What I thought was just my system showing those 4 digit fractions because I changed back and forth between metric and imperial is actually the way it is now. Correct? No big deal, I just thought I screwed something up in Standard Cabinets and was worried that it migh...
- Fri, Jun 01 2007, 11:01AM
- Forum: eCabinet Systems Software
- Topic: Corner cabinet questions
- Replies: 9
- Views: 6921
- Thu, May 31 2007, 9:49PM
- Forum: eCabinet Systems Software
- Topic: Corner cabinet questions
- Replies: 9
- Views: 6921
Okay, I have taken the Standard Frameless Corner Base and made only the required dado mods. It is in the previous post but I will reiterate: All dados should be Full Dado except at the front edges that are edgebanded so a combination of Full and Blind Dado is used with the Tenon settings to get the ...
- Thu, May 31 2007, 9:37PM
- Forum: eCabinet Systems Software
- Topic: Default settings for shelf holes
- Replies: 11
- Views: 7726
We have determined that trying to incorporate both metric and imperial in the same cabinets is not worth the problems right now and are going to stick to imperial for the time being. I still need to find the stored value and get it changed for the Standard Cabinets. Someone from Thermwood is probabl...
- Thu, May 31 2007, 9:12PM
- Forum: eCabinet Systems Software
- Topic: Default settings for shelf holes
- Replies: 11
- Views: 7726
Thanks guys, I appreciate the suggestions but what I really want to know is how to fix this from the core. I am helping an established cabinet shop get going on eCabinets and I really don't want to start introducing work arounds from the get go. As we all know, there are inevitably going to be some,...