Thermwood / eCabinet Systems

I am working on a older Thermwood with a 91 control. After some general head-scratching and help from this forum it is cutting reasonably complex parts. The problem I'm having now is with a sign project. We are trying to run multiple signs at a time, same toolpath just different locations on the tab...

The control upgrade is out of my client's budget right now, unless I can get the machine producing enough to make a retrofit worthwhile. I have a few programs that have been running on this machine to look at for examples, but any sample code would be greatly appreciated. The main thing I am looking...

Sorry for the long delay responding. The control is a 9100 V2.068 running on a 286 processor. I ran into a few odd problems, for example when I tie the axes (G61YV) the second table (V) lags slightly behind the Y. It appears the feed rate is different between the 2 tables. When the V axis gets far e...

Hopefully I am not wasting anyone's time with this post. I have a client with a dual table, dual head Thermwood router with a 9100 control (if I am reading it correctly). I found documents on the G/M codes for this machine on another post, but I haven't been able to find the high-level function lang...