Search found 79 matches

by Marius Gouws
Thu, Mar 10 2016, 10:52AM
Forum: Thermwood 3-Axis Machinery
Topic: Job seeker
Replies: 0
Views: 4384

Job seeker

Hi all. I do not know how many South Africans is still on the forum, but you never know. I am currently employed but is looking for a new job. I have the following experience. 10 years operating and programming a Thermwood C40 cnc machine. I know e-cabinets inside out. 10 years working with Bobcad c...
by Marius Gouws
Wed, Mar 09 2016, 1:41AM
Forum: Thermwood 3-Axis Machinery
Topic: Floating "No Video Input" on power up
Replies: 3
Views: 1837

Re: Floating "No Video Input" on power up

If you have a on board video card then swap the motherboard out just to see if it work, if you PCI graphics card then swap that out. Seems to me you have faulty motherboard.
by Marius Gouws
Fri, Mar 04 2016, 7:47AM
Forum: Thermwood 3-Axis Machinery
Topic: Out of space on control nest computer
Replies: 1
Views: 1420

Re: Out of space on control nest computer

Good afternoon.
First they can try clean up the c: drive. Delete all temp files and internet files. Uninstall programs that is installed on the c: drive that they do not use anymore.
Cheers
by Marius Gouws
Tue, Mar 03 2015, 12:19AM
Forum: Thermwood 3-Axis Machinery
Topic: Hard Disk Drive
Replies: 2
Views: 1380

Re: Hard Disk Drive

Will do that thank you.
by Marius Gouws
Mon, Mar 02 2015, 8:57AM
Forum: Thermwood 3-Axis Machinery
Topic: Hard Disk Drive
Replies: 2
Views: 1380

Hard Disk Drive

Good afternoon. Got our machine in 2006, and our HDD has gone corrupt in 2015 (failure). We bought a SSD (128GB) I install it and boot with the recovery cd that we got with the machine in 2006. So now it's got Win XP Pro on, but I can not activate it, it just take you to a windows webpage where you ...
by Marius Gouws
Fri, May 09 2014, 5:59AM
Forum: Thermwood 3-Axis Machinery
Topic: Furniture Carving RP-FR-FN0001
Replies: 2
Views: 1075

Re: Furniture Carving RP-FR-FN0001

So there is no explanation for it, or something that I can do about it? They should take it out of the carving library then so someone does not have to go red face back to the client and tell them I can not machine it.
Cheers
by Marius Gouws
Tue, May 06 2014, 10:30AM
Forum: Thermwood 3-Axis Machinery
Topic: Furniture Carving RP-FR-FN0001
Replies: 2
Views: 1075

Furniture Carving RP-FR-FN0001

Good afternoon. Try to do this carving on our machine, but it run dead slow (feed speeds) it will take a week for it to complete. My feed rate override is set at 100%. It is like there is a G809 or G810 in there some where. The Feedprogram is set at 200. I suppose that is iches. Any help or advise? ...
by Marius Gouws
Thu, Mar 06 2014, 6:54AM
Forum: Thermwood 3-Axis Machinery
Topic: CNC Cutters
Replies: 2
Views: 1240

CNC Cutters

Good afternoon. Anybody from South Africa still hanging around on this forum? If so, where do you get your cutters from? Leuco has take over the Onsrud sales in SA, but if you contact them to order cutters they do not even understand the term up-cut or downcut. They have one! diamond cutter in this ...
by Marius Gouws
Tue, May 14 2013, 8:32AM
Forum: Thermwood 3-Axis Machinery
Topic: EMER STOP
Replies: 6
Views: 1971

Re: EMER STOP

Good afternoon Daniel, I have send you the .cnc files. Just another thing that is also start to happen, with this other problem. When there is a tool change some times, just after picking up the tool, when the z axis goes up and the router start to spin ...then the same thing happen, "clack&quo...
by Marius Gouws
Tue, May 14 2013, 2:44AM
Forum: Thermwood 3-Axis Machinery
Topic: EMER STOP
Replies: 6
Views: 1971

Re: EMER STOP

Good morning Daniel I have nest and write the code of a job with CN. I have cut the hole job....start scaning the flip-ops (tool no 3 is my dado cutter for the flip-ops) first scan...Tool 2 is in the head push start change to tool 3 and did the flip cutting, no problem, so now tool 3 is in the head....
by Marius Gouws
Mon, May 13 2013, 3:32AM
Forum: Thermwood 3-Axis Machinery
Topic: EMER STOP
Replies: 6
Views: 1971

EMER STOP

Good Morning The machine is starting to do this more often everyday now, well its now to a stage where its doing it every time. When I ran a program, and the tool in the program is the same that is in the router head the following happen. You hear a "clack" sound at the router head, it goe...
by Marius Gouws
Wed, Feb 27 2013, 4:22AM
Forum: Thermwood 3-Axis Machinery
Topic: Has any one cut Polypropylene?
Replies: 8
Views: 2488

Re: Has any one cut Polypropylene?

Good Morning Scot Imperial!! Then you are going to have to make more changes. My tool 990(fly-cutter) is in the same tool holder (B1) than my tool number 1(T1). If "T1" is not in the spindle head, I do the following: F5, F3..(new part program), give it any name, then hit "enter" ...
by Marius Gouws
Tue, Feb 26 2013, 8:17AM
Forum: Thermwood 3-Axis Machinery
Topic: Has any one cut Polypropylene?
Replies: 8
Views: 2488

Re: Has any one cut Polypropylene?

Good afternoon ,Scot I have modify the original fly-cut program, so it ask you the length(x-axxis) and width(y-axxis) of the material you want to fly-cut. It works from the G902, so your material must be in the fence location.It works like the original program, the machine index over the table, you ...
by Marius Gouws
Mon, Sep 10 2012, 4:33AM
Forum: Thermwood 3-Axis Machinery
Topic: Error 80090016
Replies: 1
Views: 996

Error 80090016

Good Morning This is driving me insane, been like this for the last month or more. F11...F2.... click on load in CN....RNEST---"Error 80090016 during CryptAcqiureContext" click on OK!....the same error....click on OK! again "Unrecognized database format c:\rolling nest\input2.twd"...
by Marius Gouws
Sat, Jun 02 2012, 2:19AM
Forum: Thermwood 3-Axis Machinery
Topic: Error 25
Replies: 2
Views: 893

Re: Error 25

OK! I see said the blind man. It is AVG, it scans the computer, and find malware(now all of a sudden)in C:\windows...\....\drives or something and move it to the vault. I click on "restore" file, still do not sort the problem out.....do a system restore from Thursday and everything is back...

Go to advanced search