Search found 354 matches

by Daniel Vonderheide
Wed, Jul 18 2018, 8:05AM
Forum: eCabinet Systems Software
Topic: Some Part editor questions
Replies: 14
Views: 177

Re: Some Part editor questions

Answer 1- From my understanding, all internal markers are drill markers. Once you move the cut to intersect the outline of the part, the markers change to either a route marker or a outline marker depending on if it was a depth cut or a through cut. The constraints that are applied to the original m...
by Daniel Vonderheide
Tue, Jul 17 2018, 10:59AM
Forum: eCabinet Systems Software
Topic: Some Part editor questions
Replies: 14
Views: 177

Re: Some Part editor questions

Hope these help. Answer for Question 1- When you create a cut in a part it is assigned certain "markers" at locations on the cut and these are the points you can constrain to. There are different types of markers, drill, route, outline, raw, etc. When you take a cut that is internal to the...
by Daniel Vonderheide
Fri, Apr 22 2016, 11:49AM
Forum: Thermwood 3-Axis Machinery
Topic: Machine Data Backup
Replies: 4
Views: 2357

Re: Machine Data Backup

It has been added to our database. You can call in using the Virtual Service now.
by Daniel Vonderheide
Mon, Jun 29 2015, 11:08AM
Forum: Thermwood 3-Axis Machinery
Topic: control nesting update 5.85 label information changed
Replies: 3
Views: 3716

Re: control nesting update 5.85 label information changed

Chris,

Do you know what RPT file you are using? If you had a custom RPT file that still used one of our default label names, Control Nesting would have overwritten it. If you can send me a pic of the old label and the new label to program@thermwood.com, we can get it altered for you.
by Daniel Vonderheide
Mon, Oct 07 2013, 10:08AM
Forum: Thermwood 3-Axis Machinery
Topic: Flycut Tableboard starting position
Replies: 2
Views: 1781

Re: Flycut Tableboard starting position

Evan,

In the advanced settings it looks for the x and y value for the corner of the table closest to home. If the Y value is set to 0, then it will do what you are describing when you tell it to flycut the table board. The wasteboard uses the fixture offset to it would not do this.
by Daniel Vonderheide
Mon, Sep 16 2013, 9:27AM
Forum: Thermwood 3-Axis Machinery
Topic: CN5.76
Replies: 1
Views: 1300

Re: CN5.76

Please email your export file to program@thermwood.com.
by Daniel Vonderheide
Mon, Jun 10 2013, 7:40AM
Forum: Thermwood 3-Axis Machinery
Topic: error in flip CN 5.74
Replies: 9
Views: 3348

Re: error in flip CN 5.74

I apologize but there is no time frame for the release of version 5.75.
by Daniel Vonderheide
Thu, May 30 2013, 9:04AM
Forum: eCabinet Systems Software
Topic: Set of draws that won't nest
Replies: 5
Views: 1431

Re: Set of draws that won't nest

If you are running in metric, grouped doors will cause this error in version 5.73 of Control Nesting.
by Daniel Vonderheide
Tue, May 28 2013, 8:35AM
Forum: Thermwood 3-Axis Machinery
Topic: override tool auto slection (closest diamiter)
Replies: 9
Views: 3204

Re: override tool auto slection (closest diamiter)

You will need to check the tooling section to make sure you have tools selected for pocketing. Also make sure that there is NO name in the name field. THis is used for specific softwares and Cn will ignore any tool with a name unless it is reading from these files. Next make sure that your pocket cl...
by Daniel Vonderheide
Mon, May 20 2013, 9:17AM
Forum: Thermwood 3-Axis Machinery
Topic: Machine all of the sudden is slowing down on the ramp in thr
Replies: 4
Views: 2528

Re: Machine all of the sudden is slowing down on the ramp in

You can look at the top of the Control Nesting screen and it telss you the version. You can double check by going to the help menu and then choosing about. You have your last line feed speed to 100 so that is what it should be slowing down to when it cuts the part free.
by Daniel Vonderheide
Wed, May 15 2013, 12:58PM
Forum: Thermwood 3-Axis Machinery
Topic: EMER STOP
Replies: 6
Views: 2645

Re: EMER STOP

After talking to Marius, it turned out that his draw bar sensors needed adjustment.
by Daniel Vonderheide
Tue, May 14 2013, 7:05AM
Forum: Thermwood 3-Axis Machinery
Topic: EMER STOP
Replies: 6
Views: 2645

Re: EMER STOP

Email me the cnc code to program@thermwood.com so I can take a look at it please.
by Daniel Vonderheide
Mon, May 13 2013, 7:20AM
Forum: Thermwood 3-Axis Machinery
Topic: EMER STOP
Replies: 6
Views: 2645

Re: EMER STOP

Make sure that you do not have a M241 in the program you are running. This is a macro that the controller adds into the program during a tool change and then removes after the change is done. If you Estop the machine during a tool change, the controller does not remove it from the program and it wil...
by Daniel Vonderheide
Wed, Apr 17 2013, 7:19AM
Forum: Thermwood 3-Axis Machinery
Topic: error in flip CN 5.74
Replies: 9
Views: 3348

Re: error in flip CN 5.74

I have duplicated the error and have informed the software engineers of the issue. At this time, you can reinstall V5.73 and it will work correctly.
by Daniel Vonderheide
Thu, Apr 11 2013, 8:01AM
Forum: Thermwood 3-Axis Machinery
Topic: Flip Parts in CN 5.74
Replies: 2
Views: 1714

Re: Flip Parts in CN 5.74

Georgi, You have the two lower drawer slabs in a group with the upper drawer front. This upper drawer front has drill holes on the back side of it. Because they are grouped and there is machining on both sides of the parts in the group, Control Nesting is setting the pockets as the flip operation in...

Go to advanced search