Search found 21 matches

by Theodore R Fountain
Thu, Jun 21 2007, 7:27PM
Forum: eCabinet Systems Software
Topic: Graphics card for Dell laptop
Replies: 13
Views: 5637

I don't think this has been brought up. But they were working on some external graphics cards for laptops. http://www.asus.com/news_show.aspx?id=5369 also check out the review at http://www.engadget.com/2007/01/08/hands-on-with-the-asus-xg-station-external-gpu I have heard any buzz about these thing...
by Theodore R Fountain
Fri, Jun 08 2007, 5:40PM
Forum: eCabinet Systems Software
Topic: Locking up when saving
Replies: 10
Views: 3972

I had the same thing happen. It only froze when i tried to save the job with a countertop placed on an island made of 2 cabinets. All the other countertops saved fine. but i was able to narrow it down to the one countertop. I got around it by useing a display cube instead.
by Theodore R Fountain
Wed, Apr 04 2007, 6:02AM
Forum: eCabinet Systems Software
Topic: Is there an affordable laptop to run ecabinets?
Replies: 21
Views: 11090

I bought a dell inspiron 9400 , it came with 1.6g processor and 60 gig 7400rpm HD. Also i found one with a 256meg dedicated graphics card. (which should be first on your list of specs.) Its a wide screen which is nice. I got it about 6 months ago for $969.00. It was a refurbished model. No issues at...
by Theodore R Fountain
Wed, Mar 07 2007, 6:55AM
Forum: eCabinet Systems Software
Topic: Off Topic - Life is good again
Replies: 49
Views: 19004

These guys are telling me that that all the coffee drink is bitter trash. http://www.coffeefool.com Doesn't matter I can't tell what my coffee tastes like anyways since i put that flavored creamer in it. That stuff is so good. Instead of saying \"hey pass the flavored cream stuff\" we say ...
by Theodore R Fountain
Wed, Mar 07 2007, 6:41AM
Forum: eCabinet Systems Software
Topic: New feature idea for the next version. \"Does it fit?\&
Replies: 11
Views: 5304

You can just use the Wall Editor to cut a hole in the wall. This should make it easier to get the cabinets in. I new i was missing something. :) I can see that it would be difficult to program this kind of feature. And entering in all those values in could be time comsuming. Maybe a stabilized rota...
by Theodore R Fountain
Tue, Mar 06 2007, 7:41AM
Forum: eCabinet Systems Software
Topic: New feature idea for the next version. \"Does it fit?\&
Replies: 11
Views: 5304

New feature idea for the next version. \"Does it fit?\&

Have you ever worried if the piece you designed for a say an upstairs office, would actually fit up the stairs on the day of delivery. :wink: What if there was a way to tell the program all of the entrance points of a clients house, that this cabinet or job would have to pass through to get to the i...
by Theodore R Fountain
Thu, Feb 08 2007, 9:30AM
Forum: eCabinet Systems Software
Topic: i'am sorry this program needs to close, huh?
Replies: 6
Views: 4098

FYI i also have this file which was made in all most he same way (different seed) and i can load it up no problem.
by Theodore R Fountain
Thu, Feb 08 2007, 9:16AM
Forum: eCabinet Systems Software
Topic: i'am sorry this program needs to close, huh?
Replies: 6
Views: 4098

I hope i can explain this clearly enough :) Part Editor cuts are the right and left sides and the top rail. however in the first 2 files the top and back were PE cuts unitl as you'll read bellow it works better if there insets are changed instead. the shelf is fixed and the mid back panel i created ...
by Theodore R Fountain
Thu, Feb 08 2007, 8:22AM
Forum: eCabinet Systems Software
Topic: i'am sorry this program needs to close, huh?
Replies: 6
Views: 4098

The job file has another version of the cabinet in it (for customer color display only) but the attached cabinet is the one that was having the problem. however it seems that all versions of this cabinet, when i attepmt to open them cause the program to force close. thank you for the advice, pressin...
by Theodore R Fountain
Wed, Feb 07 2007, 4:15PM
Forum: eCabinet Systems Software
Topic: i'am sorry this program needs to close, huh?
Replies: 6
Views: 4098

UPDATE: if i close the job in detail room the cabinet seems to work in cab edit, meaning i can work on it but the little box that shows the cabinet is loading doesn't disappear, unless i close the program. i'am just trying to give you guru's out there all the info i can :). you can see in the pictur...
by Theodore R Fountain
Wed, Feb 07 2007, 4:03PM
Forum: eCabinet Systems Software
Topic: i'am sorry this program needs to close, huh?
Replies: 6
Views: 4098

i'am sorry this program needs to close, huh?

Ok so i've been working on this same job for awhile and no issues till today. When i go to open one of my cabinet files i get the \"we need to close error, and would you like to send a report\" this happened 10 times in a row, when i tried to open \"just\" the cabinet in cab edit...
by Theodore R Fountain
Wed, Jan 17 2007, 4:46PM
Forum: eCabinet Systems Software
Topic: window feature question?
Replies: 7
Views: 5959

sorry about the spelling. i promise to look over my post before submiting :D
by Theodore R Fountain
Wed, Jan 17 2007, 4:35PM
Forum: eCabinet Systems Software
Topic: window feature question?
Replies: 7
Views: 5959

thank guys, the info really is greta here, this is my first large scale project tih the program. i was in atlanta this year and took the 3 day class. which was top notch. thanks kerry i'll try that. but his is what i did in part editor. more work than i want for purely visal items but the custom lik...
by Theodore R Fountain
Wed, Jan 17 2007, 1:18PM
Forum: eCabinet Systems Software
Topic: window feature question?
Replies: 7
Views: 5959

understood guys, thank you much..
by Theodore R Fountain
Wed, Jan 17 2007, 10:36AM
Forum: eCabinet Systems Software
Topic: window feature question?
Replies: 7
Views: 5959

window feature question?

Is there a way to increase the width of the displayed window mullions? they are very thin. Is there a way to change there color. I can change the trim color but the mullions. are still black and thin. thanks guys, ted

Go to advanced search