Search found 296 matches

by Mark Hesketh
Mon, May 13 2019, 6:50AM
Forum: eCabinet Systems Software
Topic: Aventos - style doors
Replies: 2
Views: 6519

Re: Aventos - style doors

No, I haven't figured out a way to do it through applied hardware settings or anything.
I ended up making a couple of Part Editor "blocks" that I can bring in and then use Constraint Manager to move them into the correct spot. It's a couple of extra steps, but it works
by Mark Hesketh
Tue, Dec 12 2017, 10:05AM
Forum: Thermwood 3-Axis Machinery
Topic: Nesting Errors
Replies: 2
Views: 5474

Re: Nesting Errors

Just to update... I ran the latest Control Nesting update, and those error messages seem to have disappeared... to be replaced with a brand new one CN Error Message 12-12-2017.jpg this comes up when you select a .twd to " load ", but not if you select a .twd to " add " then it co...
by Mark Hesketh
Tue, Dec 12 2017, 9:31AM
Forum: Thermwood 3-Axis Machinery
Topic: Nesting Errors
Replies: 2
Views: 5474

Nesting Errors

Our machine operator just came in with a problem with nesting his next job. Control Nesting won't let him nest anything, and spits out the following 2 errors:
- No Current Record
- Internal Application Error

Any ideas?
by Mark Hesketh
Thu, Aug 04 2016, 8:48AM
Forum: eCabinet Systems Software
Topic: opening locks ignored in excel batch import
Replies: 7
Views: 8296

Re: opening locks ignored in excel batch import

pocket cuts are handled differently than dadoes on the machine... takes longer, extra passes. I have come up with a work-around for this part by adding a phantom top and bottom and then placing a stretcher between them, full-dadoed into the back, and locked to the correct location. after some prelim...
by Mark Hesketh
Tue, Aug 02 2016, 8:15AM
Forum: eCabinet Systems Software
Topic: opening locks ignored in excel batch import
Replies: 7
Views: 8296

Re: opening locks ignored in excel batch import

Any chance someone at Thermwood, or someone who uses excel batch inports extensively, could take a look at this? Really need this to work in order to continue with the evolution of our processes in the shop (moving more of the production to the Thermwood), can't use it at all right now with this iss...
by Mark Hesketh
Mon, Jul 25 2016, 12:42PM
Forum: eCabinet Systems Software
Topic: opening locks ignored in excel batch import
Replies: 7
Views: 8296

Re: opening locks ignored in excel batch import

Here is the part I created... it adjusts fine in ecabs, but ignores the opening lock when imported from excel.
by Mark Hesketh
Mon, Jul 25 2016, 6:40AM
Forum: eCabinet Systems Software
Topic: opening locks ignored in excel batch import
Replies: 7
Views: 8296

opening locks ignored in excel batch import

I have encountered an issue with the opening locks on partitions when importing a cabinet through the "import batch list from excel" button... it ignores the lock, yet says it is still active. To mass-produce just the top and bottoms for some of our cabinets, I have created a model with ev...
by Mark Hesketh
Thu, Aug 06 2015, 9:19AM
Forum: eCabinet Systems Software
Topic: multi-piece components
Replies: 1
Views: 3526

Re: multi-piece components

I agree. It would be great to be able to build say a 9' tall cabinet and set a cut point so that you could cut it from 8' sheets and joint the parts after cutting. An option to set a cut height on individual parts from top or bottom would be helpful to avoid needing to add phantom cabinets.
by Mark Hesketh
Mon, Jul 20 2015, 12:37PM
Forum: eCabinet Systems Software
Topic: importing batch from excel - corner cab
Replies: 3
Views: 5645

Re: importing batch from excel - corner cab

Ok, so just fill in the standard excel info but leave the width and depth fields blank?
by Mark Hesketh
Mon, Jul 20 2015, 9:09AM
Forum: eCabinet Systems Software
Topic: importing batch from excel - corner cab
Replies: 3
Views: 5645

importing batch from excel - corner cab

Is there a way to import a corner cabinet from excel and set the left and right back widths at time of import? Do you need to leave the width and depth columns blank?
by Mark Hesketh
Wed, Jul 15 2015, 9:09AM
Forum: eCabinet Systems Software
Topic: Drill adj shelf bottom for shelf pin
Replies: 13
Views: 12960

Re: Drill adj shelf bottom for shelf pin

and it still does not associate the hole in the shelf to the holes in the gables... could easily end up adjusting one and forgetting the other
by Mark Hesketh
Wed, Jul 15 2015, 9:08AM
Forum: eCabinet Systems Software
Topic: Drill adj shelf bottom for shelf pin
Replies: 13
Views: 12960

Re: Drill adj shelf bottom for shelf pin

That works fine if you are full-line boring your gables, but it's a bit more tricky and cumbersome to adjust sizes if you are going for a shorter bank of holes for each shelf.
by Mark Hesketh
Wed, Jul 15 2015, 8:25AM
Forum: eCabinet Systems Software
Topic: Drill adj shelf bottom for shelf pin
Replies: 13
Views: 12960

Re: Drill adj shelf bottom for shelf pin

I believe that you would have to build your cabinet with "fixed shelves" acting as adjustable shelves in order to get the kd holes to work... problem is that it won't give you the bank of shelf holes any more, just one... or it will give you a bank of holes that can only run up from the sh...