Search found 125 matches

by TonyGiunta
Fri, Jun 08 2018, 10:33AM
Forum: eCabinet Systems Software
Topic: .15 fit clearance mistake. Excess on cab interior ?
Replies: 3
Views: 64

Re: .15 fit clearance mistake. Excess on cab interior ?

Thanks Clint. I never knew that. So in an extreme case error like mine i.e. .15 fit. then double insult of visual gap/ non alignment to top/bottom of end panels.
by TonyGiunta
Fri, Jun 08 2018, 9:02AM
Forum: eCabinet Systems Software
Topic: .15 fit clearance mistake. Excess on cab interior ?
Replies: 3
Views: 64

Re: .15 fit clearance mistake. Excess on cab interior ?

Does the fit clearance come off the tenon or dado on blind dado joint?
by TonyGiunta
Fri, Jun 08 2018, 7:53AM
Forum: eCabinet Systems Software
Topic: .15 fit clearance mistake. Excess on cab interior ?
Replies: 3
Views: 64

.15 fit clearance mistake. Excess on cab interior ?

I made the mistake, again, of making my fit clearance .15 instead of .015. PS shop running batch has told me that the excess is in the dado (blind dado) for a DECK, for example, is on the top side towards the cabinet interior. How can that be? Why wouldn't the excess be towards the bottom of the end...
by TonyGiunta
Wed, Apr 25 2018, 4:43PM
Forum: eCabinet Systems Software
Topic: adj shelf height compartment not individually highlighting
Replies: 4
Views: 186

Re: adj shelf height compartment not individually highlighting

Hey Tim, yes I could delete a shelf if zoom in. I used a base cab I set up for a job a few months back. And now trying to convert into a tall pantry. Trying to avoid re -doing things... The NO CUT shelves have a shelf peg hole pattern for 1" stand off spacers for pullouts on Blum slides to clea...
by TonyGiunta
Wed, Apr 25 2018, 9:54AM
Forum: eCabinet Systems Software
Topic: adj shelf height compartment not individually highlighting
Replies: 4
Views: 186

adj shelf height compartment not individually highlighting

Just upgraded to new build and have a cabinet with NO CUT adj shelves where I can't highlight individual sections to adjust shelf heights between adj shelves. Also each shelf not highlighting for individual shelf selection/deleting. Any input appreciated.
by TonyGiunta
Sun, Feb 26 2017, 6:10AM
Forum: eCabinet Systems Software
Topic: Need laptop advise. How are these specs?
Replies: 5
Views: 1589

Re: Need laptop advise. How are these specs?

Donald, I don't use the room layout feature much. These days just in cab editor and then put together a batch file. So maybe that is lighter usage then what you are doing. Thanks for input.
by TonyGiunta
Fri, Feb 24 2017, 7:16PM
Forum: eCabinet Systems Software
Topic: Need laptop advise. How are these specs?
Replies: 5
Views: 1589

Re: Need laptop advise. How are these specs?

Thanks Thomas for the review. So far so good. Good point about HD.
by TonyGiunta
Fri, Feb 24 2017, 7:25AM
Forum: eCabinet Systems Software
Topic: Need laptop advise. How are these specs?
Replies: 5
Views: 1589

Need laptop advise. How are these specs?

Time for a new laptop. Am looking at new Dell xps 15 with specs below. Appreciate any advice downsides (besides price) etc. Alternative laptops? Thanks!! 7th Generation Intel® Core™ i7-7700HQ Quad Core Processor (6M cache, up to 3.8 GHz) Windows 10 Pro 64-bit English 16GB DDR4-2400MHz; up to 32GB (a...
by TonyGiunta
Thu, Sep 01 2016, 7:47AM
Forum: eCabinet Systems Software
Topic: Drawer front ignoring top reveal
Replies: 3
Views: 1427

Re: Drawer front ignoring top reveal

Interesting. Thanks Rick for the work around.
by TonyGiunta
Wed, Aug 31 2016, 10:36AM
Forum: eCabinet Systems Software
Topic: Drawer front ignoring top reveal
Replies: 3
Views: 1427

Re: Drawer front ignoring top reveal

Any Help from thermwood crew? Thanks
by TonyGiunta
Tue, Aug 30 2016, 10:03AM
Forum: eCabinet Systems Software
Topic: Drawer front ignoring top reveal
Replies: 3
Views: 1427

Drawer front ignoring top reveal

I've tried several times to get the drawer front down from top 1/4". Don't know why. Probably something stupid/brain freeze... 1st time happening for me. Input appreciated.
by TonyGiunta
Mon, Aug 22 2016, 10:04PM
Forum: Lounge
Topic: Louisiana flood victims could benefit from a Cut Ready CC
Replies: 0
Views: 3034

Louisiana flood victims could benefit from a Cut Ready CC

Seeing all the piles of destroyed cabinets and furniture in front of peoples homes is staggering. And they now NEED help to replace all that. What a catastrophe. It's heartbreaking. Got me thinking of the Cut Ready and how that could be put to good use there. Perhaps board manufacturers like Columbi...
by TonyGiunta
Thu, Dec 31 2015, 2:06PM
Forum: eCabinet Systems Software
Topic: Thermwood Production Sharing Website
Replies: 15
Views: 6647

Re: Thermwood Production Sharing Website

That works. Thanks
by TonyGiunta
Mon, Dec 21 2015, 3:55PM
Forum: eCabinet Systems Software
Topic: Thermwood Production Sharing Website
Replies: 15
Views: 6647

Re: Thermwood Production Sharing Website

Just cleared both cache and browse history. Still doesn't work. Anyone else here having similar problems besides previous mentions?

Go to advanced search