Search found 73 matches

by MarcoKnjaschewitsch
Mon, May 02 2016, 4:43PM
Forum: Thermwood 3-Axis Machinery
Topic: Dished out profile
Replies: 1
Views: 4546

Dished out profile

hey looking to find an easy way to make a simple dished out program for a thick piece of solid wood...so would need it to ramp in and out of the board...probably spherical maybe oblong lol...What do people out there do ?
by MarcoKnjaschewitsch
Tue, Jan 05 2016, 7:25PM
Forum: Thermwood 3-Axis Machinery
Topic: cs43 double pass issue
Replies: 4
Views: 12247

Re: cs43 double pass issue

There a chance this is the tool holder or collet? going to do a bit of swapping of tools as i dont think it does the same when doing an outline operation with a 1/4" tool just the 1/2" is doing this.
by MarcoKnjaschewitsch
Tue, Jan 05 2016, 5:27PM
Forum: Thermwood 3-Axis Machinery
Topic: cs43 double pass issue
Replies: 4
Views: 12247

Re: cs43 double pass issue

Just got a bit weirder as its all the way around most noticeable on 3 sides tho cutting through but that 0.5mm away from where it did its first plunge rout around ...scratching my head here...Im running a older Version of Control nesting 5.73 but havent changed anything...even on manual cut it did i...
by MarcoKnjaschewitsch
Mon, Jan 04 2016, 3:19PM
Forum: Thermwood 3-Axis Machinery
Topic: cs43 double pass issue
Replies: 4
Views: 12247

cs43 double pass issue

Seeing if anyone has a problem where on a double pass part the second time around on part to remove last part the machine is about 0.5mm shifted over by the looks leaving a slight edge to the "skin" it was to remove on the last pass to hit the waste board? it seems to have just started pop...
by MarcoKnjaschewitsch
Thu, Dec 17 2015, 12:59PM
Forum: Thermwood 3-Axis Machinery
Topic: solid wood on a CS45/43 nested router
Replies: 0
Views: 9138

solid wood on a CS45/43 nested router

Just wondering who is running alot of solid wood on there machines and how they are liking the usage / time to do things with these machines - we have been thinking of using our machine to square our 5 piece doors after assembly and sanding(Removing about 3mm all around the door to clean up all edge...
by MarcoKnjaschewitsch
Thu, Dec 17 2015, 12:45PM
Forum: eCabinet Systems Software
Topic: solid wood on a CS45/43 nested router
Replies: 0
Views: 8508

solid wood on a CS45/43 nested router

can delete this posted here instead of the machine side :P
by MarcoKnjaschewitsch
Mon, Jun 15 2015, 3:27PM
Forum: eCabinet Systems Software
Topic: Applying a drilling pattern to gable
Replies: 2
Views: 4754

Applying a drilling pattern to gable

So been looking at the KD RTA Program to maybe use and Apply my 8mm Drilling doweling holes is there a way to do this easy for applying a pattern(been finding that manual input drilling sometimes gets dropped when changing sheet stock) I just want to apply a drilling pattern to the gables only. note...
by MarcoKnjaschewitsch
Mon, Apr 14 2014, 1:12PM
Forum: eCabinet Systems Software
Topic: corner cabinets
Replies: 5
Views: 7057

Re: corner cabinets

by MarcoKnjaschewitsch
Mon, Apr 14 2014, 10:37AM
Forum: eCabinet Systems Software
Topic: corner cabinets
Replies: 5
Views: 7057

corner cabinets

Hey does anyone know how to make the outside Junction version of these cabinets - I got the Inside one done but twisting the angle on a BCC to make it the 135d it needed to be but how do i make it the reverse and the point to go to the outside?
by MarcoKnjaschewitsch
Thu, Sep 12 2013, 6:54PM
Forum: Thermwood 3-Axis Machinery
Topic: CN5.76
Replies: 1
Views: 3962

CN5.76

Just tried CN5.76 on my CS43 but have issues of nest overlapping 2 sheets into 1 sheet??? CN5.73 seems to work fine...will progress to 5.74 and see if it works too but something a miss on this update??? or a way to fix?
by MarcoKnjaschewitsch
Mon, Jan 21 2013, 5:22PM
Forum: Thermwood 3-Axis Machinery
Topic: from a different Way...
Replies: 5
Views: 6090

Re: from a different Way...

hey So working on it how far i've got. Just need to figure out how to get my referencing to work off the G902 Fence and then back instead of where i am. But i just set it up like this and its a start!

Image
by MarcoKnjaschewitsch
Sat, Jan 19 2013, 1:41AM
Forum: Thermwood 3-Axis Machinery
Topic: from a different Way...
Replies: 5
Views: 6090

Re: from a different Way...

i am going to have to really look into V-Carve pro i think I have used it with demo stuff and it seems pretty cool. Just didnt know if doing this on there was a possible thing.
by MarcoKnjaschewitsch
Fri, Jan 18 2013, 3:28PM
Forum: Thermwood 3-Axis Machinery
Topic: from a different Way...
Replies: 5
Views: 6090

from a different Way...

Ok i figure i will change up this and start fresh and see if anyone can help or know how. Here are the 2 Logo's i need to get done. I need to do them on a 1 inch board within a 3ft Long x 2ft High Oval shape. Just need it to carve out the logo's...Seems like it should be easy...just i've never done ...
by MarcoKnjaschewitsch
Wed, Jan 16 2013, 3:15PM
Forum: Thermwood 3-Axis Machinery
Topic: Text to DXF
Replies: 1
Views: 3400

Text to DXF

So another route...Trying the DXF but i have a program Called DeskEngrave that was free as a simple text thing but i cant set my height on material some reason as a DXF - Anyone have any idea what setup would work or if this wont work for the Thermwoods? Heres the link to it if anyone has a second h...
by MarcoKnjaschewitsch
Wed, Jan 16 2013, 3:13PM
Forum: Thermwood 3-Axis Machinery
Topic: 2D Writing
Replies: 5
Views: 6387

Re: 2D Writing

what post processor am i looking for in the list that would work for the CS45? I don't see a thermwood list actually on the 2D section that they have. I am going to down the VCarve pro right now and work on that.