Search found 211 matches

by Larry Epplin
Thu, Apr 12 2018, 7:38AM
Forum: Thermwood 3-Axis Machinery
Topic: control nesting 6.06
Replies: 1
Views: 214

Re: control nesting 6.06

Hi Thomas. The group combo box is greyed out when accessing the Nesting Parameters from the Settings dialog. The group setting is determined on the Settings dialog when using that method to access Nesting Parameters. When using the Edit menu to access the Nesting Parameters, the group combo box is e...
by Larry Epplin
Wed, Apr 11 2018, 8:15AM
Forum: Announcements
Topic: Control Nesting 6.06 Available
Replies: 0
Views: 551

Control Nesting 6.06 Available

http://www.thermwood.com/updates_control_nesting_home.htm NOTE: There is an unsigned version of the update installer available on the update page. We have found that older XP versions are having difficulty running a certified executable. If you are experiencing failures with the installer you can tr...
by Larry Epplin
Wed, Apr 11 2018, 8:15AM
Forum: Thermwood 3-Axis Machinery
Topic: Control Nesting 6.06 Available
Replies: 0
Views: 284

Control Nesting 6.06 Available

http://www.thermwood.com/updates_control_nesting_home.htm NOTE: There is an unsigned version of the update installer available on the update page. We have found that older XP versions are having difficulty running a certified executable. If you are experiencing failures with the installer you can tr...
by Larry Epplin
Tue, Apr 10 2018, 1:18PM
Forum: Announcements
Topic: eCabinet Systems 6.2.1 Available
Replies: 0
Views: 258

eCabinet Systems 6.2.1 Available

Special Note: If you utilize a network path for your user data, please refer to the notice titled User Data Network Path on the Install/Update page.

http://www.ecabinetsystems.com/ecabinet ... pdates.htm
by Larry Epplin
Tue, Apr 10 2018, 1:18PM
Forum: eCabinet Systems Software
Topic: eCabinet Systems 6.2.1 Available
Replies: 0
Views: 359

eCabinet Systems 6.2.1 Available

Special Note: If you utilize a network path for your user data, please refer to the notice titled User Data Network Path on the Install/Update page.

http://www.ecabinetsystems.com/ecabinet ... pdates.htm
by Larry Epplin
Mon, Dec 12 2016, 2:44PM
Forum: Thermwood 3-Axis Machinery
Topic: DXF will not load
Replies: 9
Views: 4862

Re: DXF will not load

Just a note. You might get some errors for "appropriate start point not found". They should not hurt your result. Simply click OK on them.
by Larry Epplin
Mon, Dec 12 2016, 2:43PM
Forum: Thermwood 3-Axis Machinery
Topic: DXF will not load
Replies: 9
Views: 4862

Re: DXF will not load

Control Nesting has to iterate through all the entities to piece together an operation. I found some bad geometry at spots on your dxf. I modified the drawing by putting in a few long lines and correcting the non-connected spots with bad geometry. I also segregated each chain for it's own layer. It ...
by Larry Epplin
Fri, Dec 09 2016, 11:02AM
Forum: Thermwood 3-Axis Machinery
Topic: CN 5.97 & pocketscrewdrill
Replies: 1
Views: 1035

Re: CN 5.97 & pocketscrewdrill

We've found the issue. It will be fixed in the next update. Thanks for the message!
by Larry Epplin
Tue, Dec 06 2016, 3:39PM
Forum: eCabinet Systems Software
Topic: Assembly group parts
Replies: 6
Views: 2399

Re: Assembly group parts

Sorry for the trouble Tim. We've reproduced the problem and will get it resolved. I did notice if you nest just those 4 doors you get the desired result. This can help you get the job done if needed.
by Larry Epplin
Tue, Nov 01 2016, 11:18AM
Forum: Thermwood 3-Axis Machinery
Topic: Control Nesting 5.95 PSA FOR METRIC USERS
Replies: 5
Views: 3457

Re: Control Nesting 5.95 PSA FOR METRIC USERS

Good idea Brad. We'll make the change.
by Larry Epplin
Tue, Nov 01 2016, 11:07AM
Forum: Thermwood 3-Axis Machinery
Topic: Control Nesting 5.95 PSA FOR METRIC USERS
Replies: 5
Views: 3457

Re: Control Nesting 5.95 PSA FOR METRIC USERS

Sorry for the confusion on this Thomas. We misspoke on this issue. Nothing has been altered for feed speed entries except for min feed rate in Settings. The problem that initially occurred was on a machine that is in Imperial and Control Nesting is in Metric. Min feed rate was not being obeyed. The ...
by Larry Epplin
Wed, Aug 17 2016, 10:34AM
Forum: Thermwood 3-Axis Machinery
Topic: File Path Initialization Has Occurred
Replies: 3
Views: 4680

Re: File Path Initialization Has Occurred

You might be missing a file or have a bad file that is needed for this process. Unzip the attachment and place zigaba.twt1 in the following directory.

c:\Profile Modeler\TWD
by Larry Epplin
Fri, Jul 15 2016, 12:02PM
Forum: Thermwood 3-Axis Machinery
Topic: Announcements
Replies: 1
Views: 1110

Re: Announcements

Thank you for the heads up Thomas. We have it updated now.
by Larry Epplin
Tue, Jul 12 2016, 7:52AM
Forum: Thermwood 3-Axis Machinery
Topic: xls cut list not loading
Replies: 2
Views: 1694

Re: xls cut list not loading

We did find an issue with xls. It is resolved with version 5.92.
by Larry Epplin
Mon, Jan 18 2016, 11:00AM
Forum: Thermwood 3-Axis Machinery
Topic: cant install control nesting 5.90
Replies: 1
Views: 1794

Re: cant install control nesting 5.90

Sorry for the troubles. The start of the new year introduced an issue with Microsoft executable signing. We have altered the installer file and it is now available. Please download and try again.

Go to advanced search