Search found 130 matches

by Vince Lisanti
Sat, Mar 18 2023, 10:08AM
Forum: eCabinet Systems Software
Topic: Creating Doors With Alternate Framing Sizes [For Presentation]
Replies: 2
Views: 1912

Re: Creating Doors With Alternate Framing Sizes [For Presentation]

Thanks Clint, I was not aware of this new function. This serves as a workaround for me for presentation to the customer. I just wish we could have this ability in the 5 piece door section as well, so that then the cutlist information would also be available. In the meantime, I will create the job us...
by Vince Lisanti
Thu, Mar 16 2023, 5:17PM
Forum: eCabinet Systems Software
Topic: Creating Doors With Alternate Framing Sizes [For Presentation]
Replies: 2
Views: 1912

Creating Doors With Alternate Framing Sizes [For Presentation]

I am trying to create a shaker door that has 2 3/4" framing that will show in renderings and drawings and that will size with the cabinets. I am aware that for cutlist purposes it can be done in the "Details For Cutlist" section but I also could use something that shows up in presenta...
by Vince Lisanti
Wed, Nov 04 2020, 10:59AM
Forum: eCabinet Systems Software
Topic: Suggestion: Inches & Fractions Display To 1/64"
Replies: 0
Views: 4902

Suggestion: Inches & Fractions Display To 1/64"

I have suggestion for the next build if possible? Can we please allow the Inches & Fractions display to allow down to 1/64? Only going to 1/32" is really problematic in the door creation area for cut listing when transferring shaper cutter data into the program. I know I can use the inches ...
by Vince Lisanti
Wed, Feb 17 2016, 11:47AM
Forum: eCabinet Systems Software
Topic: Windows 10 ??
Replies: 3
Views: 6542

Windows 10 ??

Just wondering if anyone is successfully running Windows 10?

I ordered a new Dell worksation that should be arriving today and I have the option to upgrade from Win 8 to Win 10

Thoughts?

Thanks
by Vince Lisanti
Fri, Oct 23 2015, 5:23PM
Forum: eCabinet Systems Software
Topic: Saving Cabinets As Assembly From Custom Layout
Replies: 0
Views: 5654

Saving Cabinets As Assembly From Custom Layout

Hi Guys, Just a thought. It would be really great if we could choose cabinets in custom layout to save as an assembly right from there where they are already placed in the proper positions. Sometimes you realize you need an assembly of multiple cabinets after you already designed the job. ie. grain ...
by Vince Lisanti
Thu, Aug 20 2015, 1:53PM
Forum: eCabinet Systems Software
Topic: Large Job Running Painfully Slow_Need Advice
Replies: 3
Views: 6237

Re: Large Job Running Painfully Slow_Need Advice

Pretty much all areas of the job.
I am not as concerned about how long renderings take though as I am in the working areas, such as time to go from editor to editor and so forth.
by Vince Lisanti
Thu, Aug 20 2015, 9:25AM
Forum: eCabinet Systems Software
Topic: Large Job Running Painfully Slow_Need Advice
Replies: 3
Views: 6237

Large Job Running Painfully Slow_Need Advice

Hello all, I have a rather large kitchen job that is running painfully slow. I would like some opinions from others on how it runs on your systems before I consider purchasing a new system. My average size jobs do not run like this. Mys system specs. are shown below. Ram is now 16GB not 4 Load times...
by Vince Lisanti
Tue, Mar 17 2015, 3:49PM
Forum: eCabinet Systems Software
Topic: Slide Holes Not Visible
Replies: 2
Views: 4599

Re: Slide Holes Not Visible

Thanks for the quick response Scott. That answers my question. I will do away with the 1/64" scribe on these cabinets.

Thanks again.
by Vince Lisanti
Tue, Mar 17 2015, 12:40PM
Forum: eCabinet Systems Software
Topic: Slide Holes Not Visible
Replies: 2
Views: 4599

Slide Holes Not Visible

BRH_24D_1 DRW.jpg
BRH_24D_1 DRW.jpg (16.12 KiB) Viewed 4599 times
BRH_24D_1 DRW.hsf
(1.75 MiB) Downloaded 606 times
I cannot get drawer slide holes to be visible in the upper partitions in this cabinet. They show up in the nest so I am assuming they would be cut, but I want to make sure and would also like to know if they are visible for anyone else.

Thanks
by Vince Lisanti
Mon, Mar 09 2015, 1:41PM
Forum: eCabinet Systems Software
Topic: Issue When Trying To Use Constraint Manager
Replies: 2
Views: 4520

Re: Issue When Trying To Use Constraint Manager

It also does this when using a cabinet from the standard cabinets folder.
by Vince Lisanti
Mon, Mar 09 2015, 11:43AM
Forum: eCabinet Systems Software
Topic: Issue When Trying To Use Constraint Manager
Replies: 2
Views: 4520

Re: Issue When Trying To Use Constraint Manager

Or I will get the error message that says:

"There was some problem while regenerating the Deck
Press Yes to lose part editor cuts or press no to revert to the old cabinet"
by Vince Lisanti
Mon, Mar 09 2015, 11:20AM
Forum: eCabinet Systems Software
Topic: Issue When Trying To Use Constraint Manager
Replies: 2
Views: 4520

Issue When Trying To Use Constraint Manager

I am having a problem with the constraint manager on various cabinets. It does not matter if it is from within the job or pulled out of existing library. I will attach a cabinet that it occurs on. I try to take the deck from this cabinet and add two more holes to the bottom center for leg levelers a...
by Vince Lisanti
Fri, Jul 25 2014, 10:01AM
Forum: eCabinet Systems Software
Topic: Major Lag In Line Drawing Editor After Recent Build Install
Replies: 16
Views: 16991

Re: Major Lag In Line Drawing Editor After Recent Build Inst

Scott,

I just sent you an email in regards to this.

Thanks
by Vince Lisanti
Wed, Jun 11 2014, 9:00AM
Forum: eCabinet Systems Software
Topic: Part Editor_Circle Mode_PROBLEM!
Replies: 1
Views: 3346

Re: Part Editor_Circle Mode_PROBLEM!

I figured it out. Somehow the snap setting was set to 0 and that is why I could no select circles
by Vince Lisanti
Wed, Jun 11 2014, 8:45AM
Forum: eCabinet Systems Software
Topic: Part Editor_Circle Mode_PROBLEM!
Replies: 1
Views: 3346

Part Editor_Circle Mode_PROBLEM!

For whatever reason the part editor is not working for me this morning. This is not specific to any one cabinet. Does not work even when using standard cabinets. I am trying to create a set of holes on the left end of a case. The side that faces out not the interior. I select the part, go into part ...

Go to advanced search