Thermwood / eCabinet Systems

Our HSD spindle only runs at 3450 rpm. If it ran faster we could plunge quicker but I guess that's just a limitation with it. Do you have any issues on the underside of your melamine panels with blow out with the brad points? We are drilling all the way thru the panels. We are doing closet panels ...

We're using the 9 spindle HSD drill bank to drill closet system thru holes in melamine. We're having to slow the plunge to 50ipm to get a decent hole quality with minimal chipout. We are using V-point bits (because we need thru holes) and have tried several brands and grinds. The bottom chipout is ...

hi all
we are facing this new issue again and not able to run the job

coming up as the following y axis out of bounds error when about to cut the 3 edges of the sheet

change file ext accordingly to open them

please advice

thanks
Mohan

Hellol mate

i would personally keep lubing the ball screw manually both sides untill the issue is fixed as this can avoid unwanted ball screw & bearing issues in near future

Mohan

It is missing the bracket [ in front of the Locate. L is an invalid character.

Dennis

Hello all

so atlast what is the final conclusion is it a bug in the CN 5.74 or some thing to do in my postprocessor somewhere or do i need to maually correct it every time in future

plase update me

Thanks ...

hello all
iam getting the following error at flip operations after updatingt the CN 5.73 to 5.74

is it some thing to do in settings or to do with post processor of the machine

(file extensions need to be corrected before attempting to open the file)

please advise us

thanks
Mohan

Thanks Daniel

that has fixed the issue for now on this job i have changed the 2 settings as mentioned and worked fine.

thanks for the support
Mohan

It is probably an issue with what tooling you have available to perform pocketing operations. It may be that the only tool that is available will only fit into that section of the pocket.

Refer to the width of this "groove" and make sure that you have a tool in Control Nesting that has a diameter ...

Hello all
we are trying to do a counter with front and top glass and have made the slot to insert the glass and did the job and found only small oval slot instead of the l shaped pocket and not sure why is it doing this has anyone had this problem in the past or is there away to do it

please ...

Hello joe
\yes you are correct
correction in my cn settings as you said .21 group tolerance had given the way clear to nest the job and only through dxf but not through ecab and twd

please go through the issue and see wheter or not you can find an bug in CN for ecab and twd

Thanks
Mohan

Hello joe

first of all thanks for the support

i have seen the images and it looks fine from your code and looks like you are checking it on a different version thm software which could be producing correct code
can you please check exmouth plinth.cnc.txt from the attachments (rename to .cnc) and ...

Hello all
we are facing many serious issues we have lost ajob recently as customer pulled back the order and thermwood techs cant say anything so far the post is open inthe forum and have submitted all the relevant files, but we lost it as tooo long delay for the customerand no response from ...

Sorry,
If you look at your screen shot, your Y axis program position is 65.229. Your distance to go is 4.741. This adds up to 69.97, not the 69.9694 that your current line reads. On a rectangular part we would edit the next line to read 69.9694. Not sure what your part looks like. Also not sure if ...

Mohan, we have ran your file here and we are getting same error on both your version software and the new software..We believe the error lies in the creation of the parts. Was a DXF file
used to create this part, or was it drawn and created in part editor. If it was created with a DXF file, we ...

Mohan,

We've been getting this error for 6 years now. Our previous work around was to have the cad dept redraw the part. This often did not fix the problem and wasted a lot of time.
Recently we discovered that there was a discrepancy in the code. The line that was highlighted when the error ...