Search found 97 matches

by mohan kommineni
Wed, Jun 12 2013, 7:36PM
Forum: Thermwood 3-Axis Machinery
Topic: Drill Bank Plunge rate
Replies: 10
Views: 4724

Re: Drill Bank Plunge rate

Our HSD spindle only runs at 3450 rpm. If it ran faster we could plunge quicker but I guess that's just a limitation with it. Do you have any issues on the underside of your melamine panels with blow out with the brad points? We are drilling all the way thru the panels. We are doing closet panels. ...
by mohan kommineni
Mon, Jun 10 2013, 7:10PM
Forum: Thermwood 3-Axis Machinery
Topic: Drill Bank Plunge rate
Replies: 10
Views: 4724

Re: Drill Bank Plunge rate

We're using the 9 spindle HSD drill bank to drill closet system thru holes in melamine. We're having to slow the plunge to 50ipm to get a decent hole quality with minimal chipout. We are using V-point bits (because we need thru holes) and have tried several brands and grinds. The bottom chipout is ...
by mohan kommineni
Wed, Apr 17 2013, 12:04AM
Forum: Thermwood 3-Axis Machinery
Topic: Y Axis Out of Bounds In Flip Sheets
Replies: 0
Views: 1100

Y Axis Out of Bounds In Flip Sheets

hi all
we are facing this new issue again and not able to run the job

coming up as the following y axis out of bounds error when about to cut the 3 edges of the sheet

change file ext accordingly to open them

please advice

thanks
Mohan
by mohan kommineni
Tue, Apr 16 2013, 7:02PM
Forum: Thermwood 3-Axis Machinery
Topic: Auto Lube Has stopped working
Replies: 1
Views: 1085

Re: Auto Lube Has stopped working

Hellol mate

i would personally keep lubing the ball screw manually both sides untill the issue is fixed as this can avoid unwanted ball screw & bearing issues in near future

Mohan
by mohan kommineni
Tue, Apr 16 2013, 6:58PM
Forum: Thermwood 3-Axis Machinery
Topic: error in flip CN 5.74
Replies: 9
Views: 3029

Re: error in flip CN 5.74

It is missing the bracket [ in front of the Locate. L is an invalid character. Dennis Hello all so atlast what is the final conclusion is it a bug in the CN 5.74 or some thing to do in my postprocessor somewhere or do i need to maually correct it every time in future plase update me Thanks Mohan
by mohan kommineni
Mon, Apr 15 2013, 9:48PM
Forum: Thermwood 3-Axis Machinery
Topic: error in flip CN 5.74
Replies: 9
Views: 3029

error in flip CN 5.74

hello all
iam getting the following error at flip operations after updatingt the CN 5.73 to 5.74

is it some thing to do in settings or to do with post processor of the machine

(file extensions need to be corrected before attempting to open the file)

please advise us

thanks
Mohan
by mohan kommineni
Wed, Aug 15 2012, 7:01PM
Forum: Thermwood 3-Axis Machinery
Topic: L shaped Pocket Not Being Cut / CN5.71
Replies: 5
Views: 2558

Re: L shaped Pocket Not Being Cut / CN5.71

Thanks Daniel

that has fixed the issue for now on this job i have changed the 2 settings as mentioned and worked fine.

thanks for the support
Mohan
by mohan kommineni
Mon, Aug 13 2012, 7:00PM
Forum: Thermwood 3-Axis Machinery
Topic: L shaped Pocket Not Being Cut / CN5.71
Replies: 5
Views: 2558

Re: L shaped Pocket Not Being Cut / CN5.71

It is probably an issue with what tooling you have available to perform pocketing operations. It may be that the only tool that is available will only fit into that section of the pocket. Refer to the width of this "groove" and make sure that you have a tool in Control Nesting that has a ...
by mohan kommineni
Mon, Aug 13 2012, 12:24AM
Forum: Thermwood 3-Axis Machinery
Topic: L shaped Pocket Not Being Cut / CN5.71
Replies: 5
Views: 2558

L shaped Pocket Not Being Cut / CN5.71

Hello all we are trying to do a counter with front and top glass and have made the slot to insert the glass and did the job and found only small oval slot instead of the l shaped pocket and not sure why is it doing this has anyone had this problem in the past or is there away to do it please suggest...
by mohan kommineni
Fri, Jun 01 2012, 12:53AM
Forum: Thermwood 3-Axis Machinery
Topic: CN 5.71 jobs undersize by 20mm!!!!!!!!!!!!
Replies: 7
Views: 1619

Re: CN 5.71 jobs undersize by 20mm!!!!!!!!!!!!

Hello joe
\yes you are correct
correction in my cn settings as you said .21 group tolerance had given the way clear to nest the job and only through dxf but not through ecab and twd

please go through the issue and see wheter or not you can find an bug in CN for ecab and twd

Thanks
Mohan
by mohan kommineni
Thu, May 31 2012, 7:15PM
Forum: Thermwood 3-Axis Machinery
Topic: CN 5.71 jobs undersize by 20mm!!!!!!!!!!!!
Replies: 7
Views: 1619

Re: CN 5.71 jobs undersize by 20mm!!!!!!!!!!!!

Hello joe first of all thanks for the support i have seen the images and it looks fine from your code and looks like you are checking it on a different version thm software which could be producing correct code can you please check exmouth plinth.cnc.txt from the attachments (rename to .cnc) and see...
by mohan kommineni
Thu, May 31 2012, 12:50AM
Forum: Thermwood 3-Axis Machinery
Topic: CN 5.71 jobs undersize by 20mm!!!!!!!!!!!!
Replies: 7
Views: 1619

CN 5.71 jobs undersize by 20mm!!!!!!!!!!!!

Hello all we are facing many serious issues we have lost ajob recently as customer pulled back the order and thermwood techs cant say anything so far the post is open inthe forum and have submitted all the relevant files, but we lost it as tooo long delay for the customerand no response from thermwo...
by mohan kommineni
Mon, May 28 2012, 6:21PM
Forum: Thermwood 3-Axis Machinery
Topic: PROGRAM ERROR!!!!! INTERCEPT CALCULATION FAILED
Replies: 11
Views: 2212

Re: PROGRAM ERROR!!!!! INTERCEPT CALCULATION FAILED

Sorry, If you look at your screen shot, your Y axis program position is 65.229. Your distance to go is 4.741. This adds up to 69.97, not the 69.9694 that your current line reads. On a rectangular part we would edit the next line to read 69.9694. Not sure what your part looks like. Also not sure if ...
by mohan kommineni
Sun, May 20 2012, 7:44PM
Forum: Thermwood 3-Axis Machinery
Topic: PROGRAM ERROR!!!!! INTERCEPT CALCULATION FAILED
Replies: 11
Views: 2212

Re: PROGRAM ERROR!!!!! INTERCEPT CALCULATION FAILED

Mohan, we have ran your file here and we are getting same error on both your version software and the new software..We believe the error lies in the creation of the parts. Was a DXF file used to create this part, or was it drawn and created in part editor. If it was created with a DXF file, we will...
by mohan kommineni
Sun, May 20 2012, 7:40PM
Forum: Thermwood 3-Axis Machinery
Topic: PROGRAM ERROR!!!!! INTERCEPT CALCULATION FAILED
Replies: 11
Views: 2212

Re: PROGRAM ERROR!!!!! INTERCEPT CALCULATION FAILED

Mohan, We've been getting this error for 6 years now. Our previous work around was to have the cad dept redraw the part. This often did not fix the problem and wasted a lot of time. Recently we discovered that there was a discrepancy in the code. The line that was highlighted when the error appeare...

Go to advanced search