Search found 8 matches
- Wed, Aug 18 2010, 11:25PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Label Layout - What do the Symbols do?
- Replies: 13
- Views: 9688
Label Layout - What do the Symbols do?
we have noticed that there are a few new label formats and some of them include a "symbol" which seems to be pulled from the C:\Rolling Nest\Labels\Symbols library. whilst they seem uncannily similar to Egyptian heiroglyphics, they must serve some purpose. What are the symbols there for? d...
- Wed, Aug 18 2010, 9:30PM
- Forum: Thermwood 3-Axis Machinery
- Topic: CN 5.58 bug with Metric re-cuts
- Replies: 1
- Views: 2127
CN 5.58 bug with Metric re-cuts
When we scan a recut part, it loads into the load screen 25.4 times greater than the original cut size. Obviously a metric hiccup. For example, if I cut a part which is 100mmx100mm and then decide to uise the recut barcode and scan in the part, the part ends up becoming 2540mm x 2540mm. Could we ple...
- Tue, Apr 20 2010, 6:45PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Reqd Tool Numbers Listed at Beginning of CNC Code
- Replies: 2
- Views: 2983
Reqd Tool Numbers Listed at Beginning of CNC Code
Does anyone else have this problem? We cut for a variety of poeple, but only have a 5 station (tool holder) machine. We do have a lot of different tools and tooling requirements to cater for customers needs. Obvioulsy although the tools are set up and available in the tool manager and in the Control...
- Tue, Apr 20 2010, 4:58PM
- Forum: eCabinet Systems Software
- Topic: owners with issues
- Replies: 4
- Views: 4203
Re: owners with issues
Tim I have a Thermwood and we are cutting using v6.3 The only real issue that we have experienced in the twd file transfer from the eCabinets to the Controller is with drawer boxes which have dados. The dado and tenon size sent to the machine does not match. We have to cut the tenons down on a panel...
- Wed, Apr 14 2010, 4:29PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Clean up pass
- Replies: 4
- Views: 4143
Re: Clean up pass
Nearly all other routers / software controllers on the market compensate for this pheonomenun by using what is called lead in. This is a technique where the tool enters into the edge of the part in an arc motion from a distance of approx 1mm away from the perimeter of the part (that means that the a...
- Mon, Mar 22 2010, 12:43AM
- Forum: eCabinet Systems Software
- Topic: Drawer Slide Front Mounting Hole - Incorrect Orientation
- Replies: 59
- Views: 44009
Re: Drawer Slide Front Mounting Hole - Incorrect Orientation
we have purchased a thermwood cnc flatbed router and recently spent $70k upgrading to the latest control system etc. we manufacture benchtops predominantly (on a point to point) but intend to use our thermwood specifically to supply cut to size parts for cabinet makers. whilst we are just embarking ...
- Sun, Mar 07 2010, 2:23PM
- Forum: Thermwood 3-Axis Machinery
- Topic: CN 5.53 - Double Pass Broken on Scrap Part Recovery
- Replies: 2
- Views: 2516
CN 5.53 - Double Pass Broken on Scrap Part Recovery
Double Pass Parts not getting second pass when “Scrap Part Recovery” has been selected.
Only the first pass outline (to the depth of the opnio skin) is being written into the CNC Code.
Only the first pass outline (to the depth of the opnio skin) is being written into the CNC Code.
- Sun, Mar 07 2010, 2:22PM
- Forum: Thermwood 3-Axis Machinery
- Topic: CN5.53 - Labelling Bug with “Scrap Part Recovery”
- Replies: 2
- Views: 2472
CN5.53 - Labelling Bug with “Scrap Part Recovery”
Labelling broken when using “Scrap Part Recovery” – We have designed our own labels which work beautifully in normal use. As soon as we select the “Scrap Part Recovery” option, we note that the labels have the following problems: a. The edge banding graphic disappears b. The length and width is chan...