Search found 22 matches

by Jim Lovejoy
Tue, Apr 26 2016, 7:56PM
Forum: eCabinet Systems Software
Topic: Stetchers not stretching
Replies: 1
Views: 858

Re: Stetchers not stretching

Ok, I figured it out, new settings, new features but for what it is worth it is a solution in search of a problem. Is there any way to make stretching behavior a default so that stretchers move with the parts they are associated with by default and if you need to change it you must change the settin...
by Jim Lovejoy
Tue, Apr 26 2016, 7:19PM
Forum: eCabinet Systems Software
Topic: Stetchers not stretching
Replies: 1
Views: 858

Stetchers not stretching

Working with the new version (6.1) I am having a problem with the stretchers on my cabinets not stretching when I change the size of the cabinet. This used to work, am I missing something? I didn't see any other posts on this subject
by Jim Lovejoy
Wed, Apr 22 2015, 3:10PM
Forum: eCabinet Systems Software
Topic: Hinge plate holes in framed cabinet
Replies: 4
Views: 975

Re: Hinge plate holes in framed cabinet

Thanks a lot Scott. This is a big help.

Jim
by Jim Lovejoy
Tue, Apr 21 2015, 7:16PM
Forum: eCabinet Systems Software
Topic: Hinge plate holes in framed cabinet
Replies: 4
Views: 975

Hinge plate holes in framed cabinet

I seem to be having some odd behavior of hinge hole locations in a framed cabinet where the doors are inset and the hinge plate holes seem to be on the wrong side of the partition I am attaching the doors to. If I go into the editor and change the positive depth of the holes I can get them to come o...
by Jim Lovejoy
Mon, Oct 20 2014, 2:12PM
Forum: eCabinet Systems Software
Topic: "Gathering Cabinet Default " Hangup
Replies: 2
Views: 554

Re: "Gathering Cabinet Default " Hangup

Scott, Before I got your reply, I decided to reinstall eCabs from scratch. Although trying to do that turned out to be more trouble than I had imagined ( needed to update virus software in order to get the registration code through my firewall, new registration code etc) it seems to have fixed the p...
by Jim Lovejoy
Sun, Oct 19 2014, 8:43AM
Forum: eCabinet Systems Software
Topic: "Gathering Cabinet Default " Hangup
Replies: 2
Views: 554

"Gathering Cabinet Default " Hangup

I have just started experiencing an odd error. When I load an existing cabinet and then go to the door editor to change door styles I get the "gathering cabinet defaults" screen which hangs up and won't go away until I restart the program. it doesn't seem to mater what cabinet of what door...
by Jim Lovejoy
Mon, Mar 26 2012, 2:13PM
Forum: eCabinet Systems Software
Topic: 6v8 Won't install
Replies: 9
Views: 2114

Re: 6v8 Won't install

Thanks Scott,

I will see what I can do.

Jim
by Jim Lovejoy
Mon, Mar 26 2012, 1:51PM
Forum: eCabinet Systems Software
Topic: 6v8 Won't install
Replies: 9
Views: 2114

Re: 6v8 Won't install

Scott, Always good to have a smart guy around. Yes that seems to have gotten eCabs to load. I notice now though that I don't seem to have the hardware that I had entered into eCabs. Does LocalStore.mdb contain hinges drawer slides etc? MY sheetgoods, boards seem to be OK but the hardware pieces I en...
by Jim Lovejoy
Mon, Mar 26 2012, 1:13PM
Forum: eCabinet Systems Software
Topic: 6v8 Won't install
Replies: 9
Views: 2114

Re: 6v8 Won't install

Unrecognized database format' c:\documents and settings\all users\application data\thermwood\ecabinet systems\LocalStore\LocalStore.mdb',

I click OK, the screen comes up freezes. When I close out I see ecabinetsystemsaplication has encountered a problem....
by Jim Lovejoy
Mon, Mar 26 2012, 12:21PM
Forum: eCabinet Systems Software
Topic: 6v8 Won't install
Replies: 9
Views: 2114

6v8 Won't install

I tried to update my eCabs software and it crashes. Claims an unrecognized data format, doesn't throw any error codes. It loads the main screen,I see the splash screen and it freezes up.
Help

Jim
by Jim Lovejoy
Fri, Dec 02 2011, 8:26AM
Forum: eCabinet Systems Software
Topic: Corrupted file, New update?
Replies: 7
Views: 972

Re: Corrupted file, New update?

I have had to rebuild most of my cabinets to get them to batch. Now I am concerned that the few that i did not have to rebuild will cut properly. It sounds like the new build may be compromising cabinets made with the old build. Why would that be?

Maybe someone at Thermwood can respond.
by Jim Lovejoy
Thu, Dec 01 2011, 4:13PM
Forum: eCabinet Systems Software
Topic: Corrupted file, New update?
Replies: 7
Views: 972

Re: Corrupted file, New update?

I reinstalled, re booted, did everything I could think of. Still problems.

I have started rebuilding the cabinets from scratch , one at a time, from new seed cabinets and it seems to be working but something is wrong. I am not confident that I will have a viable batch when i am done.
by Jim Lovejoy
Thu, Dec 01 2011, 11:26AM
Forum: eCabinet Systems Software
Topic: Corrupted file, New update?
Replies: 7
Views: 972

Corrupted file, New update?

I have been working on a job that seems to have a file problem. I am not sure if it has anything to do with the update to 6.7 but I didn't see it until after I upgraded. Yesterday I completed a set of cabinets to be machined and I saved the batch job. Then I upgraded the software. When I retrieved t...
by Jim Lovejoy
Wed, Jan 13 2010, 6:02PM
Forum: eCabinet Systems Software
Topic: Hinge & drawer slide hole patterns Gone?
Replies: 14
Views: 1517

Re: Hinge & drawer slide hole patterns Gone?

Ouch, I'm beginning to get it but this is going to add some serious effort to putting together a new job, sorting out the various hardware items and the hole patterns and making sure they work. I think I would have passed on the upgrade had I known. I see that we can add images to the data. Where mi...
by Jim Lovejoy
Wed, Jan 13 2010, 1:37PM
Forum: eCabinet Systems Software
Topic: Hinge & drawer slide hole patterns Gone?
Replies: 14
Views: 1517

Re: Hinge & drawer slide hole patterns Gone?

Me too, I'm not getting it. Just installed V6 and I can't figure out how to add drawer slides and hinges with associated hole pattern to my doors or drawer boxes. I read through the help file and I can see how the software needs to have us add a list of hardware but how do you associate a hole patte...

Go to advanced search