Search found 158 matches

by Jason Gooch
Thu, Feb 16 2017, 12:54AM
Forum: eCabinet Systems Software
Topic: Partition/Shelf Openings
Replies: 9
Views: 10499

Re: Partition/Shelf Openings

I have consistently been having the same issue. I add a partition or shelf (fixed or adjustable), then am unable to select the space above or below and adjust heights. If I zoom in I can select the shelf itself, and can then manually move it, but cannot enter values in height box to move it up or do...
by Jason Gooch
Wed, Apr 22 2015, 7:22PM
Forum: eCabinet Systems Software
Topic: Problem grouping drawer fronts
Replies: 0
Views: 4468

Problem grouping drawer fronts

Hi folks - trying to group the drawer fronts of this cabinet so they come from the same sheet of material. The drawers are not adjacent to each other, which seems to be throwing off the software - when I try to nest, it tells me it's unable to nest those drawer fronts. When I group them separately (...
by Jason Gooch
Mon, Feb 16 2015, 1:26PM
Forum: eCabinet Systems Software
Topic: sudden crash
Replies: 4
Views: 5493

Re: sudden crash

Me too me too - same problem, avast is sinking my ship. Would appreciate any suggestions, thanks muchly!

Jason
by Jason Gooch
Mon, Feb 16 2015, 1:22PM
Forum: eCabinet Systems Software
Topic: Error Message
Replies: 3
Views: 4080

Re: Error Message

Hi there - I had the same issue, tried repairing and didn't have luck. I'm removing and reinstalling now, fingers crossed.

Jason
by Jason Gooch
Thu, Jun 12 2014, 2:27PM
Forum: eCabinet Systems Software
Topic: Cabinet numbers in "filter" are outta whack
Replies: 1
Views: 3013

Cabinet numbers in "filter" are outta whack

Hi - this has been happening for some time, wondering if it's just me or a bug: when I filter cabinets in nest, the filter list is out of sequence - which makes it extra-difficult to filter cabinets. Any thoughts on this?

Thanks - Jason
by Jason Gooch
Fri, Nov 30 2012, 2:30PM
Forum: eCabinet Systems Software
Topic: Dimension change in profiled parts
Replies: 2
Views: 3126

Re: Dimension change in profiled parts

Yeah, I noticed that - no clue how it got that way. Thanks Scott.
by Jason Gooch
Fri, Nov 30 2012, 1:43PM
Forum: eCabinet Systems Software
Topic: Dimension change in profiled parts
Replies: 2
Views: 3126

Dimension change in profiled parts

Hi there - need a little help, not sure if this is a bug or something I'm doing wrong. I've got a cabinet I'm using as a leg on a parson-style desk (removed everything except top and deck). The ends are mitered - I've used a chamfer tool to cut the miters on the end of the top and deck. I'm trying t...
by Jason Gooch
Tue, Nov 20 2012, 5:36PM
Forum: eCabinet Systems Software
Topic: Some suggestions for future updates
Replies: 7
Views: 8375

Re: Some suggestions for future updates

Thanks Scott, yeah I'll probably do something like "kickthecan". And I appreciate the dimension lock suggestion, I've not used that yet and will check it out. You might be able to sense that I use eCabs intermittently - I'm a small shop, and I mix up cabinetry with furniture and other oddb...
by Jason Gooch
Tue, Nov 20 2012, 4:16PM
Forum: eCabinet Systems Software
Topic: Some suggestions for future updates
Replies: 7
Views: 8375

Re: Some suggestions for future updates

Thanks Scott, I already tracked that one down and am incorporating it. I just have to explain to my employees why cabinet #27 is only one piece of plywood!
by Jason Gooch
Mon, Nov 19 2012, 11:57PM
Forum: eCabinet Systems Software
Topic: Some suggestions for future updates
Replies: 7
Views: 8375

Re: Some suggestions for future updates

Dang, here I am a "Guru member" getting schooled by a lowly "Junior"! Thanks Wayne, good idea!
by Jason Gooch
Mon, Nov 19 2012, 2:11PM
Forum: eCabinet Systems Software
Topic: Some suggestions for future updates
Replies: 7
Views: 8375

Some suggestions for future updates

Hi Gentlepeoples from Thermwood - in the continuing quest for perfection, maybe you could add these to your list...? 1) Door/drawer selection - in cabinet editor, when changing door/drawer material and style, it would be nice if you could add a button for "same as drawer" or "same as ...
by Jason Gooch
Thu, Nov 15 2012, 1:00AM
Forum: eCabinet Systems Software
Topic: MAJOR instability issues
Replies: 2
Views: 3192

Re: MAJOR instability issues

No changes to my computer. I'll try updating the drivers. I do recall that when I first opened ecabs after updating, there was some kind of hoops error. But of course I was in a hurry and kept rolling, and don't know what it was. I'll see if it pops up again.
by Jason Gooch
Wed, Nov 14 2012, 6:45PM
Forum: eCabinet Systems Software
Topic: MAJOR instability issues
Replies: 2
Views: 3192

MAJOR instability issues

Not me, the software - ever since upgrading to 6.0 build 9, I'm having real trouble with doors and drawer fronts. It seems to have something to do with changing Door/Drawer material in cabinet editor. I open a seed cabinet in cab editor, try to change door/drawer selection and it stops responding an...
by Jason Gooch
Thu, Sep 13 2012, 5:23PM
Forum: eCabinet Systems Software
Topic: Adding lines to LDE
Replies: 1
Views: 2500

Adding lines to LDE

Hi there - just a shot in the dark here - I've continually run into problems where I need to add info to the drawings (specifically, door-swing indicators, such as in an architectural drawing). I don't think there's any way to add them, but has anyone got suggestions for other ways to do this? I mea...
by Jason Gooch
Thu, Jul 05 2012, 1:16PM
Forum: eCabinet Systems Software
Topic: cannot dimension off display parts
Replies: 4
Views: 5475

Re: cannot dimension off display parts

Hi Scott - I realized I never heard a response about this issue I'm having (and I'm having it again, which made me think of it) - did you get my job file? Thanks - Jason