Search found 158 matches
- Thu, Feb 16 2017, 12:54AM
- Forum: eCabinet Systems Software
- Topic: Partition/Shelf Openings
- Replies: 9
- Views: 10544
Re: Partition/Shelf Openings
I have consistently been having the same issue. I add a partition or shelf (fixed or adjustable), then am unable to select the space above or below and adjust heights. If I zoom in I can select the shelf itself, and can then manually move it, but cannot enter values in height box to move it up or do...
- Wed, Apr 22 2015, 7:22PM
- Forum: eCabinet Systems Software
- Topic: Problem grouping drawer fronts
- Replies: 0
- Views: 4488
Problem grouping drawer fronts
Hi folks - trying to group the drawer fronts of this cabinet so they come from the same sheet of material. The drawers are not adjacent to each other, which seems to be throwing off the software - when I try to nest, it tells me it's unable to nest those drawer fronts. When I group them separately (...
- Mon, Feb 16 2015, 1:26PM
- Forum: eCabinet Systems Software
- Topic: sudden crash
- Replies: 4
- Views: 5508
Re: sudden crash
Me too me too - same problem, avast is sinking my ship. Would appreciate any suggestions, thanks muchly!
Jason
Jason
- Mon, Feb 16 2015, 1:22PM
- Forum: eCabinet Systems Software
- Topic: Error Message
- Replies: 3
- Views: 4101
Re: Error Message
Hi there - I had the same issue, tried repairing and didn't have luck. I'm removing and reinstalling now, fingers crossed.
Jason
Jason
- Thu, Jun 12 2014, 2:27PM
- Forum: eCabinet Systems Software
- Topic: Cabinet numbers in "filter" are outta whack
- Replies: 1
- Views: 3019
Cabinet numbers in "filter" are outta whack
Hi - this has been happening for some time, wondering if it's just me or a bug: when I filter cabinets in nest, the filter list is out of sequence - which makes it extra-difficult to filter cabinets. Any thoughts on this?
Thanks - Jason
Thanks - Jason
- Fri, Nov 30 2012, 2:30PM
- Forum: eCabinet Systems Software
- Topic: Dimension change in profiled parts
- Replies: 2
- Views: 3134
Re: Dimension change in profiled parts
Yeah, I noticed that - no clue how it got that way. Thanks Scott.
- Fri, Nov 30 2012, 1:43PM
- Forum: eCabinet Systems Software
- Topic: Dimension change in profiled parts
- Replies: 2
- Views: 3134
Dimension change in profiled parts
Hi there - need a little help, not sure if this is a bug or something I'm doing wrong. I've got a cabinet I'm using as a leg on a parson-style desk (removed everything except top and deck). The ends are mitered - I've used a chamfer tool to cut the miters on the end of the top and deck. I'm trying t...
- Tue, Nov 20 2012, 5:36PM
- Forum: eCabinet Systems Software
- Topic: Some suggestions for future updates
- Replies: 7
- Views: 8428
Re: Some suggestions for future updates
Thanks Scott, yeah I'll probably do something like "kickthecan". And I appreciate the dimension lock suggestion, I've not used that yet and will check it out. You might be able to sense that I use eCabs intermittently - I'm a small shop, and I mix up cabinetry with furniture and other oddb...
- Tue, Nov 20 2012, 4:16PM
- Forum: eCabinet Systems Software
- Topic: Some suggestions for future updates
- Replies: 7
- Views: 8428
Re: Some suggestions for future updates
Thanks Scott, I already tracked that one down and am incorporating it. I just have to explain to my employees why cabinet #27 is only one piece of plywood!
- Mon, Nov 19 2012, 11:57PM
- Forum: eCabinet Systems Software
- Topic: Some suggestions for future updates
- Replies: 7
- Views: 8428
Re: Some suggestions for future updates
Dang, here I am a "Guru member" getting schooled by a lowly "Junior"! Thanks Wayne, good idea!
- Mon, Nov 19 2012, 2:11PM
- Forum: eCabinet Systems Software
- Topic: Some suggestions for future updates
- Replies: 7
- Views: 8428
Some suggestions for future updates
Hi Gentlepeoples from Thermwood - in the continuing quest for perfection, maybe you could add these to your list...? 1) Door/drawer selection - in cabinet editor, when changing door/drawer material and style, it would be nice if you could add a button for "same as drawer" or "same as ...
- Thu, Nov 15 2012, 1:00AM
- Forum: eCabinet Systems Software
- Topic: MAJOR instability issues
- Replies: 2
- Views: 3203
Re: MAJOR instability issues
No changes to my computer. I'll try updating the drivers. I do recall that when I first opened ecabs after updating, there was some kind of hoops error. But of course I was in a hurry and kept rolling, and don't know what it was. I'll see if it pops up again.
- Wed, Nov 14 2012, 6:45PM
- Forum: eCabinet Systems Software
- Topic: MAJOR instability issues
- Replies: 2
- Views: 3203
MAJOR instability issues
Not me, the software - ever since upgrading to 6.0 build 9, I'm having real trouble with doors and drawer fronts. It seems to have something to do with changing Door/Drawer material in cabinet editor. I open a seed cabinet in cab editor, try to change door/drawer selection and it stops responding an...
- Thu, Sep 13 2012, 5:23PM
- Forum: eCabinet Systems Software
- Topic: Adding lines to LDE
- Replies: 1
- Views: 2504
Adding lines to LDE
Hi there - just a shot in the dark here - I've continually run into problems where I need to add info to the drawings (specifically, door-swing indicators, such as in an architectural drawing). I don't think there's any way to add them, but has anyone got suggestions for other ways to do this? I mea...
- Thu, Jul 05 2012, 1:16PM
- Forum: eCabinet Systems Software
- Topic: cannot dimension off display parts
- Replies: 4
- Views: 5484
Re: cannot dimension off display parts
Hi Scott - I realized I never heard a response about this issue I'm having (and I'm having it again, which made me think of it) - did you get my job file? Thanks - Jason