Search found 746 matches

by Scott Marshburn
Tue, Aug 17 2021, 4:55PM
Forum: eCabinet Systems Software
Topic: Unfinished-one-side sheet stock and laminate
Replies: 3
Views: 521

Re: Unfinished-one-side sheet stock and laminate

When setting up your material select yes for single-sided. You can change the materials A-Side in the cabinet editor. As for the different Laminates, you can do this when giving the material a name. For example, "3/4 laminated material Finished side oak unfinished side white". unfortunatel...
by Scott Marshburn
Tue, Aug 17 2021, 8:14AM
Forum: eCabinet Systems Software
Topic: How to specify a lock tenon joint, two tenons, one thru screw center, for 4" stretcher
Replies: 2
Views: 263

Re: How to specify a lock tenon joint, two tenons, one thru screw center, for 4" stretcher

In the construction parameters for the stretcher set the single Kd/Rta max edge length to be the same as the width of the stretcher
by Scott Marshburn
Mon, Aug 16 2021, 8:14PM
Forum: eCabinet Systems Software
Topic: How to get the screw holes for through-fastening between lock tenons?
Replies: 2
Views: 255

Re: How to get the screw holes for through-fastening between lock tenons?

here is the pattern file that I use for .75 materials
p75matpilothole.zip
(1.56 KiB) Downloaded 29 times
http://www.thermwood.com/forums/download/file.php?mode=view&id=16960
by Scott Marshburn
Mon, Aug 16 2021, 7:48PM
Forum: eCabinet Systems Software
Topic: How to get the screw holes for through-fastening between lock tenons?
Replies: 2
Views: 255

Re: How to get the screw holes for through-fastening between lock tenons?

I have a kD hole pattern that I use for this. I modified an existing kd pattern by removing the cam hole and changing the pinhole to the depth and diamenter for the through-hole.
by Scott Marshburn
Fri, Aug 13 2021, 4:12PM
Forum: eCabinet Systems Software
Topic: Min depth increment for drawer boxes
Replies: 2
Views: 393

Min depth increment for drawer boxes

If we set a min depth for drawer boxes when the cabinet depth is set to a depth that is too shallow for the min depth setting it gives a warning that it will be removed from the cabinet then it just removes it. Would it be possible to make it so that we can choose to keep going and lose the drawer o...
by Scott Marshburn
Mon, Jul 19 2021, 7:32PM
Forum: eCabinet Systems Software
Topic: Dowel construction
Replies: 4
Views: 879

Re: Dowel construction

Hi Ian. There are no settings dedicated to dowel construction. However, you can achieve this in a couple of different ways. (1) Use the KD-Rta fastner settings. You can create a hole pattern for the dowel hole. (2) Use the user-defined operation feature. (3) Create the dowel holes in the part editor...
by Scott Marshburn
Wed, Jul 14 2021, 2:47PM
Forum: eCabinet Systems Software
Topic: Line Drawing Editor - Arrow size
Replies: 2
Views: 675

Re: Line Drawing Editor - Arrow size

Hi Leo, In the Line drawing editor in the Right-click menu select drafting parameters then in the arrow size you can set the width and length of the arrows.
Hope this helps.
by Scott Marshburn
Wed, Jul 14 2021, 11:08AM
Forum: eCabinet Systems Software
Topic: Constraint manager variables in drawer box designer
Replies: 0
Views: 551

Constraint manager variables in drawer box designer

When in the drawer box designer if I take a drawer box part that has a part editor cut on it into the constraint manager the option for variables is not available. However, if I take the part into constraint manager from the cabinet editor the variable option is available.
by Scott Marshburn
Wed, Jun 30 2021, 7:02PM
Forum: Design Sharing
Topic: TANDEM plus BLUMOTION
Replies: 1
Views: 1648

TANDEM plus BLUMOTION

Would anyone happen to have a hole pattern for TANDEM plus BLUMOTION that they would be willing to share?
by Scott Marshburn
Thu, Jun 24 2021, 3:59PM
Forum: Lounge
Topic: (FEATURE REQUEST) Blind Corner Panels
Replies: 1
Views: 845

Re: (FEATURE REQUEST) Blind Corner Panels

Hi Nicholas. A slab door with the appropriate reveals and/or insets might work.
by Scott Marshburn
Mon, Jun 21 2021, 7:28PM
Forum: eCabinet Systems Software
Topic: Feature request for global item modifications
Replies: 0
Views: 938

Feature request for global item modifications

Would it be possible to add the capability to set the construction settings on a part-to-part basis? For example. On a base cabinet that is using 3/4 Generic materials and lock dado joinery for all parts. It would be great if we could select just a certain part such as the top stretcher front and/or...
by Scott Marshburn
Wed, May 26 2021, 7:24PM
Forum: eCabinet Systems Software
Topic: Fixed Shelf Delete?
Replies: 1
Views: 742

Re: Fixed Shelf Delete?

Hi John. Try holding down the shift key along with both mouse buttons then drag the mouse toward you to zoom in closer to the shelf and see if you can select it. If the opening still gets highlighted then click on the shelf and see if it selects it as well if so then hit the delete key.
by Scott Marshburn
Sat, May 22 2021, 4:44PM
Forum: eCabinet Systems Software
Topic: Countertop Height
Replies: 2
Views: 1148

Re: Countertop Height

Mark, Could you post the esj file so we can take a look?
by Scott Marshburn
Wed, Mar 17 2021, 4:18PM
Forum: eCabinet Systems Software
Topic: Kitchen presentation
Replies: 2
Views: 2018

Re: Kitchen presentation

Here is a video that I uploaded to my youtube channel a few years ago on how I go about using Lighting to enhance my presentations
https://youtu.be/Tj59OumOElA?list=PLsaj ... 5HomRGZb0U

Go to advanced search