Search found 8 matches

by Mohammed riyas
Wed, Apr 17 2013, 2:46AM
Forum: Thermwood 5-Axis Machinery
Topic: reg - RTCP
Replies: 1
Views: 13607

reg - RTCP

Dear's, Could anyone please help us.............! Currently we are using C67 DT 5-axis Machinery for our application. In that router, does not have the RTCP function for 5 axis machining. It is possible to upgrade our existing machines with RTCP function & with all new features. or any other opt...
by Mohammed riyas
Sun, Jan 13 2013, 8:04AM
Forum: Thermwood 5-Axis Machinery
Topic: C- Axis issue..........!
Replies: 2
Views: 15763

C- Axis issue..........!

Dear's, Can anyone Help us on this Issue..................! We having C67 Thermwood machine. In that, I can't able to move the C - axis, at any direction. While I am trying to moving my C - axis at Positive (+ ve ) Direction it's showing an error of " Siemens feed module " The same at Nega...
by Mohammed riyas
Wed, Sep 19 2012, 9:21AM
Forum: Thermwood 5-Axis Machinery
Topic: CAM Solution..........!
Replies: 2
Views: 14938

CAM Solution..........!

Dear's,

Can any one help us...... :!:

Currently we are using Artcam for 3-axis Machining. we decided to buy a New CAM software for 5-axis Machining
But we struggling with Brands, either Master cam or Power Mill.

Plz suggest the best solution for us in order to suits with all aspects. :|
by Mohammed riyas
Fri, Jul 27 2012, 11:56PM
Forum: Thermwood 5-Axis Machinery
Topic: Tool Drop Out
Replies: 1
Views: 13291

Tool Drop Out

Dear's, plz help us..........! we are using C67 DT machine. while in running the machine suddenly stops & shows an emergency alaram. after that we continue's with homing operation and again run the program but the machine shows, "the draw bar is not fully retract & no tool on the spindl...
by Mohammed riyas
Mon, Jun 11 2012, 5:34AM
Forum: eCabinet Systems Software
Topic: 3D Modeling
Replies: 1
Views: 4187

3D Modeling

Dear's, Plz help us...........! we are using Rhino and solidworks for 3D design. Plz ensure us If can we able to put directly rhino and solidworks files on eCabinet for Machining, without using any CAM software for programming or any other option is there. we want to do machining, directly with 3D d...
by Mohammed riyas
Wed, Jan 18 2012, 1:44AM
Forum: Thermwood 5-Axis Machinery
Topic: Z - axis
Replies: 2
Views: 15387

Z - axis

Dears plz help me, when i cut off pneumatic supply suddenly to machine, the Z - axis move rapidly to its dead end & the bolts connected between pneumatic cylinder to machine are broke off.so, i cant able to move the machine again to its home position and not able to join the cylinder with the ma...
by Mohammed riyas
Thu, Jan 05 2012, 2:41AM
Forum: Thermwood 5-Axis Machinery
Topic: HOMING ERROR
Replies: 2
Views: 14513

Re: HOMING ERROR

Dear Mr.Daniel Vonderheide,
Thanks a lot for your needfull help.
by Mohammed riyas
Wed, Jan 04 2012, 7:01AM
Forum: Thermwood 5-Axis Machinery
Topic: HOMING ERROR
Replies: 2
Views: 14513

HOMING ERROR

Dears..............

plz help me with this error,
i'm trying to make homing but the maching stops and showing,

Error 1514 : B Axis C – Marker adjust value is too largely Negative. Plz report THERMWOOD Corp

Plz help me to rectify this problem.

Go to advanced search