Thanks Daniel, unfortunately im a long way from USA. I will try a few settings and try reinstall the control nesting.
Hopefully there is an archive for the nesting program installer. Not sure upgrading software before an important job is worth the risk until Ive run out of options.
Search found 9 matches
- Fri, May 31 2013, 3:29PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Resetting Control Nesting settings
- Replies: 3
- Views: 5706
- Thu, May 30 2013, 2:00PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Resetting Control Nesting settings
- Replies: 3
- Views: 5706
Resetting Control Nesting settings
Is there any way to retrieve the tool settings from previous settings? I might have erased all the tools with the erase button now I'm unsure of which ones to put back in. I'm only using a 10mm Triple flute cutter as an outline tool and same as for any dado or pocketing. The Drill banks are also use...
- Tue, May 28 2013, 1:57PM
- Forum: Thermwood 3-Axis Machinery
- Topic: override tool auto slection (closest diamiter)
- Replies: 9
- Views: 10559
- Tue, May 28 2013, 1:43PM
- Forum: Thermwood 3-Axis Machinery
- Topic: override tool auto slection (closest diamiter)
- Replies: 9
- Views: 10559
Re: override tool auto slection (closest diamiter)
Is there any way to retrieve the tool settings from previous settings? I might have erased all the tools witht the erase button now Im unsure of which ones to put back in. Im only using a 10mm Triple flute cutter as an outline tool and same as for any dado or pocketing. The Drill banks are also used...
- Tue, May 28 2013, 2:01AM
- Forum: Thermwood 3-Axis Machinery
- Topic: override tool auto slection (closest diamiter)
- Replies: 9
- Views: 10559
Re: override tool auto slection (closest diamiter)
Ive done something similar and now it gets stuck on couldn't find tool for pocket operation. nothing loads
- Fri, Nov 02 2012, 9:27PM
- Forum: Thermwood 3-Axis Machinery
- Topic: 901 PART LOCATOR while doing Vee Grooves
- Replies: 11
- Views: 10439
Re: 901 PART LOCATOR while doing Vee Grooves
https://docs.google.com/document/d/1ChGABTdxzEWw2m_CMAj62ClnQUk8XPgWZIU1v2e-sm0/edit Im running on a C40 Thermwood CNC. Windows 2000 system. Im a bit new to the thermwood but have managed to get Flycutting and processing jobs from THM down to half a millimeter. Previously the last operator was using...
- Thu, Nov 01 2012, 8:43PM
- Forum: Thermwood 3-Axis Machinery
- Topic: 901 PART LOCATOR while doing Vee Grooves
- Replies: 11
- Views: 10439
Re: 901 PART LOCATOR while doing Vee Grooves
The M00 code is a program stop. It will stop the file from running until you press the cycle start button again. You should be fine to press the green button and continue from what I can see. Yes, I have resumed the program, expecting it to switch tools and start grooving. It however just loops thr...
- Thu, Nov 01 2012, 7:48AM
- Forum: Thermwood 3-Axis Machinery
- Topic: 901 PART LOCATOR while doing Vee Grooves
- Replies: 11
- Views: 10439
Re: 901 PART LOCATOR while doing Vee Grooves
[CLS] [PRINT " Now that the Piece is cut to Size, Move away any offcuts."] [PRINT " that will interfere with the following slatwall operations."] [PRINT " "] [PRINT "Reposition the cut part into the G901 Locator."] [PRINT "**********NOTE 901 PART LOCATOR ...
- Wed, Oct 31 2012, 10:25PM
- Forum: Thermwood 3-Axis Machinery
- Topic: 901 PART LOCATOR while doing Vee Grooves
- Replies: 11
- Views: 10439
901 PART LOCATOR while doing Vee Grooves
Im running a Vee Groove program and getting a "Reposition the cut part into the G901 Locator" It will cut the size out with the right cutter then stops, waiting for some code input of some sort. Is this where I put an x and y location to resume and start vee cutting? Stuck on this message ...