Search found 9 matches

by Brent Riley
Fri, May 31 2013, 3:29PM
Forum: Thermwood 3-Axis Machinery
Topic: Resetting Control Nesting settings
Replies: 3
Views: 5673

Re: Resetting Control Nesting settings

Thanks Daniel, unfortunately im a long way from USA. I will try a few settings and try reinstall the control nesting.

Hopefully there is an archive for the nesting program installer. Not sure upgrading software before an important job is worth the risk until Ive run out of options.
by Brent Riley
Thu, May 30 2013, 2:00PM
Forum: Thermwood 3-Axis Machinery
Topic: Resetting Control Nesting settings
Replies: 3
Views: 5673

Resetting Control Nesting settings

Is there any way to retrieve the tool settings from previous settings? I might have erased all the tools with the erase button now I'm unsure of which ones to put back in. I'm only using a 10mm Triple flute cutter as an outline tool and same as for any dado or pocketing. The Drill banks are also use...
by Brent Riley
Tue, May 28 2013, 1:43PM
Forum: Thermwood 3-Axis Machinery
Topic: override tool auto slection (closest diamiter)
Replies: 9
Views: 10410

Re: override tool auto slection (closest diamiter)

Is there any way to retrieve the tool settings from previous settings? I might have erased all the tools witht the erase button now Im unsure of which ones to put back in. Im only using a 10mm Triple flute cutter as an outline tool and same as for any dado or pocketing. The Drill banks are also used...
by Brent Riley
Tue, May 28 2013, 2:01AM
Forum: Thermwood 3-Axis Machinery
Topic: override tool auto slection (closest diamiter)
Replies: 9
Views: 10410

Re: override tool auto slection (closest diamiter)

Ive done something similar and now it gets stuck on couldn't find tool for pocket operation. nothing loads
by Brent Riley
Fri, Nov 02 2012, 9:27PM
Forum: Thermwood 3-Axis Machinery
Topic: 901 PART LOCATOR while doing Vee Grooves
Replies: 11
Views: 10418

Re: 901 PART LOCATOR while doing Vee Grooves

https://docs.google.com/document/d/1ChGABTdxzEWw2m_CMAj62ClnQUk8XPgWZIU1v2e-sm0/edit Im running on a C40 Thermwood CNC. Windows 2000 system. Im a bit new to the thermwood but have managed to get Flycutting and processing jobs from THM down to half a millimeter. Previously the last operator was using...
by Brent Riley
Thu, Nov 01 2012, 8:43PM
Forum: Thermwood 3-Axis Machinery
Topic: 901 PART LOCATOR while doing Vee Grooves
Replies: 11
Views: 10418

Re: 901 PART LOCATOR while doing Vee Grooves

The M00 code is a program stop. It will stop the file from running until you press the cycle start button again. You should be fine to press the green button and continue from what I can see. Yes, I have resumed the program, expecting it to switch tools and start grooving. It however just loops thr...
by Brent Riley
Thu, Nov 01 2012, 7:48AM
Forum: Thermwood 3-Axis Machinery
Topic: 901 PART LOCATOR while doing Vee Grooves
Replies: 11
Views: 10418

Re: 901 PART LOCATOR while doing Vee Grooves

[CLS] [PRINT " Now that the Piece is cut to Size, Move away any offcuts."] [PRINT " that will interfere with the following slatwall operations."] [PRINT " "] [PRINT "Reposition the cut part into the G901 Locator."] [PRINT "**********NOTE 901 PART LOCATOR ...
by Brent Riley
Wed, Oct 31 2012, 10:25PM
Forum: Thermwood 3-Axis Machinery
Topic: 901 PART LOCATOR while doing Vee Grooves
Replies: 11
Views: 10418

901 PART LOCATOR while doing Vee Grooves

Im running a Vee Groove program and getting a "Reposition the cut part into the G901 Locator" It will cut the size out with the right cutter then stops, waiting for some code input of some sort. Is this where I put an x and y location to resume and start vee cutting? Stuck on this message ...