Thermwood / eCabinet Systems

Hi is there a door already developed that i could just apply to the cabinets quite a process using profie modler.

Hi thanks for your help i usually us Aspan and just manually set tooling but i have alot of draws to do
and would like to use the draw front drilling. Could describe what you mean by a flat.tol, do you
just mean one with the standard straight cutter profile?

Hi
I need to create framed doors out of 18mm MDF. The center needs to be cut out leaving 55mm around the edges, it also needs to have
a 12.5 x 10 mm rebate on the back for a 12mm MDF panel to fit in. I can create this using part editor which is fine but when it is cut out it
pockets it instead of ...

Hi i just downloaded build 9 and i created a list of panels in the batch (cabinets with only the side remaining, i do this so i can display taping instructions on stickers) i saved it but when i went open it it just sent me back to the main page?

Hi,

I have an opportunity to do some work for a display company machining panels with a 3d pattern in it. There are only a couple of variations and the customer
already has the file drawn up (I think its in autocad), looks like waves cut out of MDF.

I can see a couple of options, would love to ...

Hi how would you go about it using a stretcher?

Hi could some one help me rotate this top to match the sides i have tried angle part in construction setting but have had no success.

Hi

I think i found them:

Inlimit
x-200.9140
y-0.2540
z-0.2540

Outlimit
x 3670.5540
y 2527.5540
z 246.6340

We use a 9.52mm router bit as well, are these limits set correctly?

Hi thanks for your help were can i check out limits?

Hi

Is there any way to set your own measurements in line editor, i find it very tricky and time consuming finding the right node to get the correct measurement.

Hi

Yes the co ordinates for fixture offset 1 are 3670.5 x 2152 y which is the corner closest to pop up pins.

Hi is there any way to nest more the 1000 parts in one nest.

Hi,

I thought i already had it set to use G52L1, i am still learning g code but i though that this section of code referenced
the fixture offset G52L1 and set material dimensions.

SET ZSHIFT=18.0000
[ADJFIXOFF, 1, -2420.0000]
[ADJFIXOFF, 2, -1215.0001]
G52L1
[CLSQCP]
[SETQCPPOS(0)]
[QCP ON ...

Hi could anyone let me know why i am getting an x axis error on this file ?

Hi we have a few computers running e cabinets and i would like to transfer hardware pricing and materials between them so they are uniform.
How can i do this?