Search found 180 matches

by Thomas strembitsky
Tue, Mar 05 2024, 5:28PM
Forum: eCabinet Systems Software
Topic: Recycle Bin
Replies: 6
Views: 237

Re: Recycle Bin

its something to do with global item modification
by Thomas strembitsky
Tue, Nov 14 2023, 1:29PM
Forum: Thermwood 3-Axis Machinery
Topic: Control Nesting Part Placement Observations
Replies: 2
Views: 6370

Re: Control Nesting Part Placement Observations

have you played around at all with rectangular nesting?
by Thomas strembitsky
Fri, Oct 06 2023, 2:11PM
Forum: Thermwood 3-Axis Machinery
Topic: outline ramp in bug/issue CN 7.08
Replies: 11
Views: 2088

Re: outline ramp in bug/issue CN 7.08

Hi mark, you can "roll back" the software by just downloading and reinstalling a old version i was using 7.06 cause 7.07 was bugged for me. this has helped out a lot in the past.
by Thomas strembitsky
Thu, Oct 05 2023, 2:53PM
Forum: Thermwood 3-Axis Machinery
Topic: outline ramp in bug/issue CN 7.08
Replies: 11
Views: 2088

outline ramp in bug/issue CN 7.08

Just updated to the news control nesting 7.08 and thm software 11.3.5 When cutting off fall it only does a proper outline cut on 2 of the edges per piece and left a ramp in on the other two edges. Attached is the cnc code and some pictures. Not sure if anyone else has run into this. I have been able...
by Thomas strembitsky
Thu, Jun 08 2023, 2:14PM
Forum: Thermwood 3-Axis Machinery
Topic: control nesting feature request
Replies: 1
Views: 1523

control nesting feature request

It would be nice if in control nesting we could mouse over/click on the parts in the nest and get a name and dimension instead of having to write to cnc and look at the nest diagrams.

It would also be nice to have the the sheet dimensions on the bottom like how the sheet thickness is displayed.
by Thomas strembitsky
Tue, Jan 10 2023, 5:29PM
Forum: eCabinet Systems Software
Topic: locks not working on left right stretchers
Replies: 3
Views: 2277

Re: locks not working on left right stretchers

please see attached
broken stretcher.esj
(526.02 KiB) Downloaded 180 times
by Thomas strembitsky
Mon, Jan 09 2023, 4:17PM
Forum: eCabinet Systems Software
Topic: locks not working on left right stretchers
Replies: 3
Views: 2277

locks not working on left right stretchers

I'm not sure why but if a cabinet made in a earlier version has a left right stretcher that is up-down with locks changing the depth of cabinet causes the piece to rotate. the only solution is to delete it and make a new one.
by Thomas strembitsky
Thu, Dec 29 2022, 2:19PM
Forum: Thermwood 3-Axis Machinery
Topic: CN hangs when nesting profiled MDF doors
Replies: 6
Views: 2981

Re: CN hangs when nesting profiled MDF doors

we have upgraded the ram from 2 gigs to 4 gigs and replaced the hard drive with a SSD. i noticed the change from the SSD more then the ram. we had to mess around in windows to cap the available ram to 3 gigs to get the intime kernel working. i don't remember the exact process as this was a few years...
by Thomas strembitsky
Wed, Nov 30 2022, 5:43PM
Forum: eCabinet Systems Software
Topic: ecabinets 6.210 bug change cabinet features doors/drawers
Replies: 0
Views: 3028

ecabinets 6.210 bug change cabinet features doors/drawers

in batch editor load two or more cabinets that have doors and check all. click adj features then change the doors to a new door and click ok. the change will only happen to the first cabinet and not the following ones. if you check all and use global item modification to change the doors to a new st...
by Thomas strembitsky
Mon, Nov 28 2022, 11:26AM
Forum: Thermwood 3-Axis Machinery
Topic: control nesting 7.06 Bug
Replies: 2
Views: 2483

control nesting 7.06 Bug

this one is interesting. Load a job and add an off fall manually rectangular with a size that the parts will nest on to. nest and look at the layout. then write to cnc and the parts on the sheet image are inflated. but if you check the cut paths they are correct. before.PNG after.PNG code output is ...
by Thomas strembitsky
Wed, Oct 12 2022, 9:49AM
Forum: Thermwood 3-Axis Machinery
Topic: Rectangular Optimization bugs
Replies: 7
Views: 5196

Re: Rectangular Optimization bugs

the off falls have to be rectangular.
by Thomas strembitsky
Tue, Sep 20 2022, 4:25PM
Forum: Thermwood 3-Axis Machinery
Topic: control nesting 7.04 add sheet bug with rectangular optimization
Replies: 1
Views: 3700

control nesting 7.04 add sheet bug with rectangular optimization

create a rectangular sheet and nest with rectangular optimization. the piece is green like an off fall and will not cut the pieces on it when written to cnc
added piece is green.PNG
when nested.PNG
by Thomas strembitsky
Tue, Sep 20 2022, 2:36PM
Forum: Thermwood 3-Axis Machinery
Topic: sheet yield percent bug
Replies: 1
Views: 3666

sheet yield percent bug

using rectangular optimization nest two pieces and your sheet yield number is wildly out of Wack. This is in metric with do not include in yield not checked off. checking it off give you the correct numbers.
sheet yield percentage.PNG
by Thomas strembitsky
Wed, May 18 2022, 3:13PM
Forum: eCabinet Systems Software
Topic: Changing plywood material
Replies: 2
Views: 2783

Re: Changing plywood material

you could create anther drawer with your new materials, then go in to global item modification and then drawer box settings and change drawers boxes to the new drawer with material combo you want.
by Thomas strembitsky
Wed, Mar 30 2022, 4:18PM
Forum: eCabinet Systems Software
Topic: custom texture not loading in door/drawer designer
Replies: 1
Views: 2572

custom texture not loading in door/drawer designer

created a new sheet good material and gave it a custom texture. then i used that material to make a slab door and the texture is now just a bunch of black and white bars. but when i add the door to the cabinets and view it in the cabinet editor its fine, but is bugged out in the batch editor. can an...

Go to advanced search