Search found 24 matches
- Fri, Sep 26 2014, 9:42AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Accidental Cabinet Deletion
- Replies: 0
- Views: 4589
Accidental Cabinet Deletion
While in e-cab I deleted two cabinets by accident and they didn't show up in my recycling bin and I would love to get them back somehow! Does anyone have a clue on how to do this?
- Fri, Sep 26 2014, 8:28AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Tool Selection
- Replies: 5
- Views: 6899
Re: Tool Selection
I agree! The fall back to a pocket would be wonderfull! Thanks
- Thu, Sep 18 2014, 6:24AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Tool Selection
- Replies: 5
- Views: 6899
Tool Selection
Once in a while, we have cabinets that use a Hidden Tenon at 100% the thickness. In this case it is 1.22'' thick. When we get to the machine to machine the part with the pocket for this tenon, it searches for a tool that has the width of 1.01'' to 0.505''. We often use a half inch downcut for this p...
- Mon, Jun 16 2014, 7:25AM
- Forum: eCabinet Systems Software
- Topic: Control Nesting Off-fall Material
- Replies: 0
- Views: 4213
Control Nesting Off-fall Material
Is it possible in the next version of the controll nesting to be able to change the name of Off-fall material to match. we use the size of the material in the name, therefore a 3/4'' MDF sheet 5x10 off-fall could be used in a job using only 3/4'' MDF 4x8 sheets This would save a couple minutes each ...
- Tue, Jun 10 2014, 7:38AM
- Forum: eCabinet Systems Software
- Topic: Left-Right Drawer Slide Hole Patterns
- Replies: 1
- Views: 3086
Left-Right Drawer Slide Hole Patterns
Been searching for a way to have a different hole pattern between the left and right side of a drawer (Without creating a second cabinet and using different drawer patterns for both and selecting a side panel from each one).. Has anyone found anything that could help me??
- Wed, May 28 2014, 2:22PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Hole Dilema
- Replies: 2
- Views: 4427
Re: Hole Dilema
Thanks! This explains a lot!!
- Wed, May 28 2014, 12:04PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Hole Dilema
- Replies: 2
- Views: 4427
Hole Dilema
I have a 2-9/16'' hole for a cable grommet drawn in e-cabinet that goes through my piece and because of this it cuts the hole in one pass which creates a piece of malemine which gets stuck between the cutter head and vacuum and then jams the machine while trying to change tools!!!! Is there a ways t...
- Tue, May 13 2014, 3:24PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Arc Dxf Ramp Error
- Replies: 2
- Views: 4421
Re: Arc Dxf Ramp Error
I'll try to clarify my problem! The problem is when we use the control nest to nest dxfs that are in an arc form. the outline ramp-in doesn't realise that it is an arc and therefore cuts straight the length of the in-ramp and then follows my arc. This has been happening only since the latest update!...
- Fri, May 09 2014, 8:22AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Arc Dxf Ramp Error
- Replies: 2
- Views: 4421
Arc Dxf Ramp Error
Recently we've been noticing that when we try to cut a 4inch arc using a *.dxf in the control nesting, it seems to cut the in-ramp corner straight into our piece then follow the correct arc and then it finishes again notched inside the arc!!!! :wall: checked the dxf and there is nothing out of the o...
- Wed, Apr 09 2014, 7:04AM
- Forum: eCabinet Systems Software
- Topic: Group Parts - Drawers - Assembly
- Replies: 7
- Views: 7487
Re: Group Parts - Drawers - Assembly
The new Update has resolved this problem!! Thank You!!!
All thats missing for us now is an option for shelf holes in the back and to be able to split backs without using stretchers
Again Thanks!
All thats missing for us now is an option for shelf holes in the back and to be able to split backs without using stretchers
Again Thanks!
- Thu, Mar 27 2014, 9:14AM
- Forum: eCabinet Systems Software
- Topic: Group Parts - Drawers - Assembly
- Replies: 7
- Views: 7487
Re: Group Parts - Drawers - Assembly
The control Nesting is V5.78 but it seems to believe that the drawers are 14'' wide and 6'' high (in a way is true) but the drawer front with grain is 14'' long and 6'' wide and this causes en error in nesting at the CNC...
- Wed, Mar 26 2014, 6:24AM
- Forum: eCabinet Systems Software
- Topic: Group Parts - Drawers - Assembly
- Replies: 7
- Views: 7487
Re: Group Parts - Drawers - Assembly
Here are two assemblies that we tried. One works since the Grains is in-line with the heigth and width.
- Tue, Mar 25 2014, 2:02PM
- Forum: eCabinet Systems Software
- Topic: Group Parts - Drawers - Assembly
- Replies: 7
- Views: 7487
Group Parts - Drawers - Assembly
I've been trying to group a line of Drawer fronts across 3 cabinet,s approx. 30'' wide 6'' high with the grain going the length of all three cabinets. When I add the drawers into the cabinet it always sais the width is 30'' and the height is 6'' even when I rotate the grain, and because it thinks it...
- Tue, Mar 25 2014, 1:59PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Group Parts - Drawers - Assembly
- Replies: 4
- Views: 9479
Group Parts - Drawers - Assembly
I've been trying to group a line of Drawer fronts across 3 cabinet,s approx. 30'' wide 6'' high with the grain going the length of all three cabinets. When I add the drawers into the cabinet it always sais the width is 30'' and the height is 6'' even when I rotate the grain, and because it thinks it...
- Wed, Feb 26 2014, 10:12AM
- Forum: eCabinet Systems Software
- Topic: Shelf Holes in Back
- Replies: 2
- Views: 3531
Re: Shelf Holes in Back
Didn't realise i already posted this sorry about that!!!