Search found 19 matches
- Fri, Jun 13 2014, 2:50PM
- Forum: Thermwood 3-Axis Machinery
- Topic: M999 and spoilboard settings
- Replies: 2
- Views: 4944
Re: M999 and spoilboard settings
Ok thanks forest. So to run through the procedure, 1. Fit additional spoil board. 2. Roughly measure the distance from tool sensor up to the spoil board 3. Enter a new value for tool sensor to top of spoil board. 4. Run tool length program then fly cut with z height set to 0 5. If fly cut is still t...
- Fri, Jun 13 2014, 12:39PM
- Forum: Thermwood 3-Axis Machinery
- Topic: M999 and spoilboard settings
- Replies: 2
- Views: 4944
M999 and spoilboard settings
I am getting ready glue an additional sheet of mdf onto my spoilboard to use as my new cutting surface. I am saving up for a vaccum pump but in the meantime I need to boost the thickness of my spoilboard. My machine is a thermwood c53 from 1997/8 Because of the additional height to the spoilboard I ...
- Fri, Jun 13 2014, 7:23AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Thermwood C53 router - Jerky motion
- Replies: 5
- Views: 8267
Re: Thermwood C53 router - Jerky motion
Many thanks for your help Brad, After looking again at my cam program I see it was in fact rolling the tool around the corners as you suggested. Just going to give it a test run with the option to keep corners sharp but I am confident this will solve the issue. I may still have an issue with tight i...
- Sat, Jun 07 2014, 4:18PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Thermwood C53 router - Jerky motion
- Replies: 5
- Views: 8267
Re: Thermwood C53 router - Jerky motion
Thanks Forest, what does the g905 do to the machine?
- Sat, Jun 07 2014, 10:01AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Thermwood C53 router - Jerky motion
- Replies: 5
- Views: 8267
Thermwood C53 router - Jerky motion
Hi, I have a C53 router (1997) and I am having trouble with the machine not slowing down for corners. The router will continue at full speed and make a 90 degree turn of direction, this causes the head to vibrate leave marks in the work piece. Slowing down the overall feedrate solves the issue in pa...
- Tue, Dec 10 2013, 3:31PM
- Forum: Thermwood 3-Axis Machinery
- Topic: C53 10hp spindle bearing
- Replies: 0
- Views: 4347
C53 10hp spindle bearing
I have been hearing what I belive to be worn bearing noises coming from the spindle on a 1998 c53 3 axis router. It is the old style spindle driven off the large motor and not and HSD. Has anyone ever changed one off these bearing themselves? Im guess the tramming and realightment of the head may be...
- Tue, Nov 26 2013, 10:08AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Condensation on machine and inside cabinet
- Replies: 0
- Views: 4150
Condensation on machine and inside cabinet
Hi, we are having some cold days in the shop right now. Our shed is on a farm and not isulated and missing door etc.. Anyway there is a lot of water condensing on the machine overnightm and also some mositure inside the control cabinet. Is there anything I can do to help manage the condesation. Im t...
- Sat, Nov 02 2013, 4:41AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Vacuum Pump for my C53
- Replies: 7
- Views: 9721
Vacuum Pump for my C53
Hi, I am looking to fit a vacuum pump to my C53. It has the vacuum bed fitted but I do not have the pump.
Bed size is 5ft by 10ft
What type and size of pump is recommended for this machine.
Many thanks Gavin
Bed size is 5ft by 10ft
What type and size of pump is recommended for this machine.
Many thanks Gavin
- Mon, May 27 2013, 2:07PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Extraction Recommendations
- Replies: 0
- Views: 3896
Extraction Recommendations
I have recently set up a thermwood c53, the machine is great and I think I have gotten my head around most of the controls and programming options, it is now working nicely with the post processer from my toolpaths program. A couple of things left on the list to do are source some TG collets hard to...
- Wed, May 15 2013, 12:58PM
- Forum: Thermwood 3-Axis Machinery
- Topic: What is a fence on a cnc router?
- Replies: 1
- Views: 3481
Re: What is a fence on a cnc router?
Problem now solved, safety wire for the fence had been cut during transport.
- Tue, May 14 2013, 4:19PM
- Forum: Thermwood 3-Axis Machinery
- Topic: What is a fence on a cnc router?
- Replies: 1
- Views: 3481
What is a fence on a cnc router?
Hello I have the following error when running in manual mode with my c53 router. "Fence closed in manual mode - All axes inhibited by plc ( Input 17 open )" Input 17 on the plc has no light illumantated on the board so the pin is currently open. Is it possible to force the pin closed with ...
- Tue, Apr 16 2013, 2:15PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Moving a Thermwood 3 axis CNC
- Replies: 5
- Views: 7619
Re: Moving a Thermwood 3 axis CNC
My machine arrived today mostly unscathed. There was one piece of damage to one of the twin siemens motors that moves the gantry, the forklift during loading has snapped both the encoder and tach wires clean off plus some chucks have been taken out of the main motor power wires that will need repair...
- Sat, Apr 06 2013, 4:08AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Servo motor rating on c53
- Replies: 0
- Views: 3598
Servo motor rating on c53
Does anyone know the Newton meter or kw ratings of the motor in a standard c53. I know the siemens transformer is 10kw does this mean the 4 motors are 2500w each?
- Thu, Apr 04 2013, 3:05PM
- Forum: Thermwood 3-Axis Machinery
- Topic: V-carve on 1997 C53 router
- Replies: 7
- Views: 9572
Re: V-carve on 1997 C53 router
What year is your supercontroller Josh?
- Thu, Apr 04 2013, 2:57PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Moving a Thermwood 3 axis CNC
- Replies: 5
- Views: 7619
Re: Moving a Thermwood 3 axis CNC
Thanks Gerry some good tips there, I went to view and pay for the machine a few days ago and with some luck it should be getting shipped next week. I sat looking at the hard drive thinking to myself I should prob remove that before shipping but for some reason I didn't and I am now regretting taking...