Search found 15 matches

by Shaun Just
Wed, Nov 04 2015, 11:34PM
Forum: eCabinet Systems Software
Topic: Formula in hole settings
Replies: 0
Views: 3481

Formula in hole settings

Hi, Just came across that the formula settings when in shelf hole settings is giving incorrect values. Ie: Cabinet width of 700mm, I go to apply holes on the back of a cabinet on the left inset with the formula: CabinetWidth/3 which should be 233.33mm but it says 5926.68mm?? Same happens on the righ...
by Shaun Just
Wed, Nov 04 2015, 11:12PM
Forum: eCabinet Systems Software
Topic: Shelf Hole Suggestion
Replies: 0
Views: 3397

Shelf Hole Suggestion

Hi, Just a small suggestion that would be quite handy, being able to offset the position of the shelf hole ie from the bottom of the shelf, as we use shelf studs that have a 5mm high plastic support from the steel pin so I need to offset the hole by 5mm to make the shelf centre of the cabinet. I kno...
by Shaun Just
Thu, Oct 29 2015, 10:24PM
Forum: eCabinet Systems Software
Topic: Copy contour
Replies: 3
Views: 1126

Re: Copy contour

Hi tim,

Yeah very familiar with it, what I'm saying is it only offsets one line at a time not the whole box as such

Cheers
by Shaun Just
Thu, Oct 29 2015, 6:38PM
Forum: eCabinet Systems Software
Topic: Copy contour
Replies: 3
Views: 1126

Copy contour

Hi there, Is there an easier way to copy a complete closed contour and enlarge or decrease the size for example, I make a 55mm frame and want to do a 47mm profiled edge on the inside, at the moment I create my 55mm edge and do the pocket cut, then I create edges and copy each inside edge by 8mm and ...
by Shaun Just
Thu, Sep 24 2015, 9:42PM
Forum: eCabinet Systems Software
Topic: Crashing
Replies: 1
Views: 1215

Crashing

Hi,

I'm finding that with upgrading to windows 10, ecabinets is forever crashing, I'm having to save a batch list after each cabinet I create/edit in the list otherwise the program will crash

Is this issue resolved in the latest version?

Cheers
Shaun
by Shaun Just
Fri, Aug 21 2015, 1:55AM
Forum: eCabinet Systems Software
Topic: Version 6.1?
Replies: 1
Views: 1948

Version 6.1?

Hi,

Is there any idea of how far along as to when version 6.1 will be released? Could really do with some of the new features about now and also some of the bugs fixed

Cheers!
by Shaun Just
Tue, Jun 30 2015, 2:17PM
Forum: eCabinet Systems Software
Topic: Fixed Shelf Locks
Replies: 3
Views: 1277

Re: Fixed Shelf Locks

Thanks Scott!

Can't wait for the next version to be released, any idea on when that might be?
by Shaun Just
Tue, Jun 30 2015, 12:48AM
Forum: eCabinet Systems Software
Topic: Fixed Shelf Locks
Replies: 3
Views: 1277

Fixed Shelf Locks

Hi there, Maybe a silly question, but is there a way to lock a fixed shelf in place, so when resizing the cabinet, it stays in the same fixed position say from the very bottom of the cabinet or the top of the toe kick position. An example of a cabinet i use is attached, at the moment when i resize t...
by Shaun Just
Wed, May 27 2015, 3:34AM
Forum: eCabinet Systems Software
Topic: Constraints not working
Replies: 5
Views: 1684

Re: Constraints not working

Thanks for taking the time to go through this Scott, have taken your advice and have gone with your steps (seems much simpler and less time consuming!) I can now carry on as per normal!

Regards,

Shaun
Not Just Kitchens LTD
by Shaun Just
Fri, May 22 2015, 3:54PM
Forum: eCabinet Systems Software
Topic: Constraints not working
Replies: 5
Views: 1684

Re: Constraints not working

Drawers.hsf Drawers.jpg Hi Scott, This is just one that's in my library which i have been using for years, havent changed anything to it. Now when i go into contraint manager, then exit out (and hit apply changes (even if i didnt do any)) then i go back into it, the profile constraints are gone :wa...
by Shaun Just
Fri, May 22 2015, 12:03AM
Forum: eCabinet Systems Software
Topic: Constraints not working
Replies: 5
Views: 1684

Re: Constraints not working

beforeconstraints.png
What i want, then exit out and apply changes...


afterconstraints.png
Then after going back into the contraint manager, they have disappeared. Never happened to me before!
by Shaun Just
Thu, May 21 2015, 11:59PM
Forum: eCabinet Systems Software
Topic: Constraints not working
Replies: 5
Views: 1684

Constraints not working

Hi there, i've just recently got the latest build for ecabinets, and now ive noticed that when i do a profile cut (on a door) and go to contraint mangage it, when i get out of the contraint manager after applying the changes and then go back into it, the contraints have disappeared from the profilin...
by Shaun Just
Tue, Feb 24 2015, 10:27PM
Forum: eCabinet Systems Software
Topic: Crashing
Replies: 1
Views: 592

Crashing

Hi, it seems everytime now i goto the part editor to profile panels, it seems to crash on me :wall: Its when i go to do the second profile edge, it comes up with the error errorparteditor.png saying ecabinets has stopped working grr. Ive done this many times and its only just started coming up with ...
by Shaun Just
Wed, Dec 17 2014, 4:15AM
Forum: eCabinet Systems Software
Topic: Library installation trouble
Replies: 2
Views: 747

Re: Library installation trouble

Rick Deskins wrote:Do the following:

Download, then install this Microsoft Visual C++ redistributable from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5638


Thanks Rick, that's done the trick!

Shaun
Not Just Kitchens LTD
by Shaun Just
Mon, Dec 15 2014, 11:47PM
Forum: eCabinet Systems Software
Topic: Library installation trouble
Replies: 2
Views: 747

Library installation trouble

Hi there,

I have an error come up after trying to install the corner and special cabinet library from the eCabinets website.. any ideas on getting this working? I've attached a screenshot of the error message i get..

Thanks,

Shaun
Not Just Kitchens LTD
NZ


errorecabinets.png

Go to advanced search