Hi Stuart
I found the same problem. But what i do is put a negative in. So like -20mm in the left and right boxes. that kicks the holes out past the edges and you end up with just the centre holes.
Cheers
Thom
Search found 377 matches
- Fri, Apr 17 2015, 4:33PM
- Forum: eCabinet Systems Software
- Topic: Shelf holes in backs of cabinets
- Replies: 3
- Views: 4993
- Mon, Mar 30 2015, 2:40PM
- Forum: eCabinet Systems Software
- Topic: Mixing jobs in nesting
- Replies: 6
- Views: 8017
Re: Mixing jobs in nesting
Hi Neville
I batch each area, so 1 batch/file will be called KITCHEN and then another would be called BATHROOM 1 or Laundry etc. Since the name comes up on the label as well as the colour symbol it makes it easier to sort out.
Hope this helps
Cheers
Thom
I batch each area, so 1 batch/file will be called KITCHEN and then another would be called BATHROOM 1 or Laundry etc. Since the name comes up on the label as well as the colour symbol it makes it easier to sort out.
Hope this helps
Cheers
Thom
- Tue, Sep 10 2013, 3:15PM
- Forum: eCabinet Systems Software
- Topic: eCabinet Systems Version 6.0 Build 10 is so 2012
- Replies: 10
- Views: 10210
Re: eCabinet Systems Version 6.0 Build 10 is so 2012
Or even eCabinets 7?
- Tue, Apr 16 2013, 3:26PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Auto Lube Has stopped working
- Replies: 1
- Views: 3776
Auto Lube Has stopped working
Hi All The bottom Auto lube has stopped dripping, the top 1 is fine, there is air in the container where the lube is as its bubbling away. but no matter what there is no drips coming out the top. Could it be blocked? if so how do i clean it or has it just failed and i need a new 1? This is quite maj...
- Wed, Apr 10 2013, 5:15PM
- Forum: Lounge
- Topic: Laser Tape Measures
- Replies: 3
- Views: 11041
Laser Tape Measures
Hi
Just wondering if anyone uses these to measure up jobs? There are ones that have blue tooth and work with your iphone or ipad. Crazy stuff!
http://www.accurate.net.nz/lasertape.htm
Cheers
Thom
Just wondering if anyone uses these to measure up jobs? There are ones that have blue tooth and work with your iphone or ipad. Crazy stuff!
http://www.accurate.net.nz/lasertape.htm
Cheers
Thom
- Mon, Mar 04 2013, 8:41PM
- Forum: eCabinet Systems Software
- Topic: Not Nesting Right
- Replies: 5
- Views: 6033
Re: Not Nesting Right
sweet!!!
Patch 3 fixed it! cheers guys!
Patch 3 fixed it! cheers guys!
- Mon, Mar 04 2013, 8:29PM
- Forum: eCabinet Systems Software
- Topic: Not Nesting Right
- Replies: 5
- Views: 6033
Re: Not Nesting Right
It seems to be the grouping the doors together is a problem. Its ok when nesting in ecab, but as soon as its down at the machine it goes back to being straight grain.
- Sun, Mar 03 2013, 9:31PM
- Forum: eCabinet Systems Software
- Topic: Not Nesting Right
- Replies: 5
- Views: 6033
Not Nesting Right
Hi
Ive done a nest with cross grain doors. yet when it nests its not crossed grained the doors run with the grain. Its ticked in ecab as grain and in the nest. Im running V6 Build 10 and RN 5.59 patch 2
Cheers
Thom
Ive done a nest with cross grain doors. yet when it nests its not crossed grained the doors run with the grain. Its ticked in ecab as grain and in the nest. Im running V6 Build 10 and RN 5.59 patch 2
Cheers
Thom
- Tue, Nov 27 2012, 10:28PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Tooling Heat Up
- Replies: 3
- Views: 5567
Tooling Heat Up
Hello! What a day its been! Nearly every sheet, the tool change for the B4 Tool its got stuck in the router, I've cleaned the tool, inside the cone, changed the collet and the cutter and still nearly every sheet it gets stuck. It started off abit warm just on the knob, now 8 hours later pretty much ...
- Wed, Sep 19 2012, 11:43AM
- Forum: eCabinet Systems Software
- Topic: Feature Requests
- Replies: 40
- Views: 38086
Re: Feature Requests
Scott
There is a program that reads the CNC code and tells you how long it will take to cut. its called Cut time from www.cncautomation.com/en/software, Its fantasic!
Cheers
Thom
There is a program that reads the CNC code and tells you how long it will take to cut. its called Cut time from www.cncautomation.com/en/software, Its fantasic!
Cheers
Thom
- Tue, Jul 31 2012, 2:37PM
- Forum: Thermwood 3-Axis Machinery
- Topic: How Thick is to Thick?
- Replies: 4
- Views: 5998
Re: How Thick is to Thick?
Sorry I mean a 23mm Spoil Board. I call it different things. lol Like the 6mm waste board Dennis calls it, we call it a sacro.
- Mon, Jul 30 2012, 6:59PM
- Forum: Thermwood 3-Axis Machinery
- Topic: How Thick is to Thick?
- Replies: 4
- Views: 5998
How Thick is to Thick?
Hello! 2 Things: How thick is your waste board? AND Just wondering if any1 can offer some advise. I used 25mm for my Waste board and now its down to 23mm, Thinking it'll last longer than if i used an 18mm Waste board and machined down to 16mm. My question is: Will i loose much vacuum using a 23mm wa...
- Thu, Jun 14 2012, 10:39PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Sydney AWISA 11 to 14 July
- Replies: 8
- Views: 8574
Re: Sydney AWISA 11 to 14 July
Meet up at thermwood stand ae?
- Thu, Jun 14 2012, 1:15PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Sydney AWISA 11 to 14 July
- Replies: 8
- Views: 8574
Re: Sydney AWISA 11 to 14 July
Yep Im gonna be there. Will be good to meet up.
- Thu, Jun 07 2012, 10:10PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Ramp in Length
- Replies: 2
- Views: 4195
Ramp in Length
Hello!
What is the way to work out the perfect ramp in length for a cutter? Im Using a 12.7mm 2 Flute Cutter.
Cheers
Thom Davies
What is the way to work out the perfect ramp in length for a cutter? Im Using a 12.7mm 2 Flute Cutter.
Cheers
Thom Davies