Search found 377 matches

by Thom Davies
Fri, Apr 17 2015, 4:33PM
Forum: eCabinet Systems Software
Topic: Shelf holes in backs of cabinets
Replies: 3
Views: 888

Re: Shelf holes in backs of cabinets

Hi Stuart

I found the same problem. But what i do is put a negative in. So like -20mm in the left and right boxes. that kicks the holes out past the edges and you end up with just the centre holes.

Cheers

Thom
by Thom Davies
Mon, Mar 30 2015, 2:40PM
Forum: eCabinet Systems Software
Topic: Mixing jobs in nesting
Replies: 6
Views: 1436

Re: Mixing jobs in nesting

Hi Neville

I batch each area, so 1 batch/file will be called KITCHEN and then another would be called BATHROOM 1 or Laundry etc. Since the name comes up on the label as well as the colour symbol it makes it easier to sort out.

Hope this helps

Cheers

Thom
by Thom Davies
Tue, Apr 16 2013, 3:26PM
Forum: Thermwood 3-Axis Machinery
Topic: Auto Lube Has stopped working
Replies: 1
Views: 990

Auto Lube Has stopped working

Hi All The bottom Auto lube has stopped dripping, the top 1 is fine, there is air in the container where the lube is as its bubbling away. but no matter what there is no drips coming out the top. Could it be blocked? if so how do i clean it or has it just failed and i need a new 1? This is quite maj...
by Thom Davies
Wed, Apr 10 2013, 5:15PM
Forum: Lounge
Topic: Laser Tape Measures
Replies: 3
Views: 4108

Laser Tape Measures

Hi

Just wondering if anyone uses these to measure up jobs? There are ones that have blue tooth and work with your iphone or ipad. Crazy stuff!


http://www.accurate.net.nz/lasertape.htm


Cheers

Thom
by Thom Davies
Mon, Mar 04 2013, 8:41PM
Forum: eCabinet Systems Software
Topic: Not Nesting Right
Replies: 5
Views: 1218

Re: Not Nesting Right

sweet!!!

Patch 3 fixed it! cheers guys!
by Thom Davies
Mon, Mar 04 2013, 8:29PM
Forum: eCabinet Systems Software
Topic: Not Nesting Right
Replies: 5
Views: 1218

Re: Not Nesting Right

It seems to be the grouping the doors together is a problem. Its ok when nesting in ecab, but as soon as its down at the machine it goes back to being straight grain.
by Thom Davies
Sun, Mar 03 2013, 9:31PM
Forum: eCabinet Systems Software
Topic: Not Nesting Right
Replies: 5
Views: 1218

Not Nesting Right

Hi

Ive done a nest with cross grain doors. yet when it nests its not crossed grained the doors run with the grain. Its ticked in ecab as grain and in the nest. Im running V6 Build 10 and RN 5.59 patch 2

Cheers

Thom
by Thom Davies
Tue, Nov 27 2012, 10:28PM
Forum: Thermwood 3-Axis Machinery
Topic: Tooling Heat Up
Replies: 3
Views: 1309

Tooling Heat Up

Hello! What a day its been! Nearly every sheet, the tool change for the B4 Tool its got stuck in the router, I've cleaned the tool, inside the cone, changed the collet and the cutter and still nearly every sheet it gets stuck. It started off abit warm just on the knob, now 8 hours later pretty much ...
by Thom Davies
Wed, Sep 19 2012, 11:43AM
Forum: eCabinet Systems Software
Topic: Feature Requests
Replies: 40
Views: 9378

Re: Feature Requests

Scott

There is a program that reads the CNC code and tells you how long it will take to cut. its called Cut time from www.cncautomation.com/en/software, Its fantasic!

Cheers

Thom
by Thom Davies
Tue, Jul 31 2012, 2:37PM
Forum: Thermwood 3-Axis Machinery
Topic: How Thick is to Thick?
Replies: 4
Views: 1281

Re: How Thick is to Thick?

Sorry I mean a 23mm Spoil Board. I call it different things. lol Like the 6mm waste board Dennis calls it, we call it a sacro.
by Thom Davies
Mon, Jul 30 2012, 6:59PM
Forum: Thermwood 3-Axis Machinery
Topic: How Thick is to Thick?
Replies: 4
Views: 1281

How Thick is to Thick?

Hello! 2 Things: How thick is your waste board? AND Just wondering if any1 can offer some advise. I used 25mm for my Waste board and now its down to 23mm, Thinking it'll last longer than if i used an 18mm Waste board and machined down to 16mm. My question is: Will i loose much vacuum using a 23mm wa...
by Thom Davies
Thu, Jun 14 2012, 10:39PM
Forum: Thermwood 3-Axis Machinery
Topic: Sydney AWISA 11 to 14 July
Replies: 8
Views: 1778

Re: Sydney AWISA 11 to 14 July

Meet up at thermwood stand ae?
by Thom Davies
Thu, Jun 14 2012, 1:15PM
Forum: Thermwood 3-Axis Machinery
Topic: Sydney AWISA 11 to 14 July
Replies: 8
Views: 1778

Re: Sydney AWISA 11 to 14 July

Yep Im gonna be there. Will be good to meet up.
by Thom Davies
Thu, Jun 07 2012, 10:10PM
Forum: Thermwood 3-Axis Machinery
Topic: Ramp in Length
Replies: 2
Views: 871

Ramp in Length

Hello!

What is the way to work out the perfect ramp in length for a cutter? Im Using a 12.7mm 2 Flute Cutter.

Cheers

Thom Davies

Go to advanced search