Search found 239 matches

by Clint Buechlein
Thu, Dec 27 2018, 10:58AM
Forum: eCabinet Systems Software
Topic: Global Item Modification
Replies: 4
Views: 201

Re: Global Item Modification

Leo, Do you need to display the color for renders or at all times in the layout? If it is just in render, when you choose Render, you can right click and choose Modify Textures. There you can change the display texture of materials, walls, floors, etc without changing the material itself. May be of ...
by Clint Buechlein
Thu, Dec 27 2018, 9:13AM
Forum: eCabinet Systems Software
Topic: Global Item Modification
Replies: 4
Views: 201

Re: Global Item Modification

Leo, It seems to work on assemblies in the Cabinet Editor as you can pick individual pieces or all of the pieces of the assembly. I'm not certain though why it doesn't work from Custom Layout. I'll have to speak with the software engineers if there is a reason why it doesn't, or if it is a bug. I wo...
by Clint Buechlein
Thu, Dec 27 2018, 8:40AM
Forum: eCabinet Systems Software
Topic: Board stock getting cut off in Part Editor
Replies: 2
Views: 119

Re: Board stock getting cut off in Part Editor

Leo, I see the same thing. I'll pass it along to the software engineers and go from there. It seems as though it is still there, but being rotated and cut away. You can use the Delete tool and choose Geometry Cut. The area that has been removed will show so you can bring it back. It still gets kind ...
by Clint Buechlein
Mon, Dec 10 2018, 4:20PM
Forum: eCabinet Systems Software
Topic: LOCKED FIXED SHELVES INSET ?
Replies: 1
Views: 238

Re: LOCKED FIXED SHELVES INSET ?

Click the f(x) button next to the inset. Clear out the formula within there and press OK. You can then delete out the inset value and it will go all the way to the back.

-Clint-
by Clint Buechlein
Wed, Nov 21 2018, 11:55AM
Forum: eCabinet Systems Software
Topic: Line drawing issue
Replies: 3
Views: 422

Re: Line drawing issue

Tom, I'd recommend making sure your graphics card driver is up to date from the manufacturer. Do not check through Windows, go to the manufacturer's site to find the latest driver. Also, if your default printer is an actual printer, you can try uninstalling the printer, then reinstalling with the la...
by Clint Buechlein
Wed, Nov 21 2018, 11:54AM
Forum: eCabinet Systems Software
Topic: Tooling of part editor cuts
Replies: 4
Views: 445

Re: Tooling of part editor cuts

Stuart, You aren't able to specify which tool is doing the pocketing. Your only way to get your 3/8" tool to do the pocketing would be to eliminate the 1/2" tool from the list. Depending on what all you are cutting in the job, it may or may not be what you want though. Also worth noting on...
by Clint Buechlein
Tue, Nov 20 2018, 2:32PM
Forum: eCabinet Systems Software
Topic: Global setting for inset door/drawer ?
Replies: 3
Views: 411

Re: Global setting for inset door/drawer ?

Andy, There isn't a way to do what you are wanting the way you currently are working. Instead, create a cabinet with the settings you want to keep from cabinet to cabinet and save it to your own library. Place that cabinet in the room and make the minor changes you need to make. That way any default...
by Clint Buechlein
Tue, Nov 20 2018, 2:27PM
Forum: eCabinet Systems Software
Topic: Tooling of part editor cuts
Replies: 4
Views: 445

Re: Tooling of part editor cuts

Stuart, Check you setting Tool to Use below Cleanup Amount in Settings. I'm going to take a guess and say it is probably set for Smallest Pocket Tool. If that isn't the case, can you post an export with a job loaded (preferably with just the part in question checked to be nested)? I can dig into it ...
by Clint Buechlein
Fri, Oct 19 2018, 1:00PM
Forum: eCabinet Systems Software
Topic: cross section view
Replies: 5
Views: 708

Re: cross section view

Dave,

Cross section needs to be done from the front view of a wall. The wall must be selected and be at a flat view, not rotated.

-Clint-
by Clint Buechlein
Thu, Oct 18 2018, 7:38AM
Forum: Thermwood 3-Axis Machinery
Topic: issue with manual nesting
Replies: 1
Views: 399

Re: issue with manual nesting

I can see the same thing here, I'll get it sent to the software engineers. Thank you.

-Clint-
by Clint Buechlein
Thu, Oct 18 2018, 7:33AM
Forum: eCabinet Systems Software
Topic: Inset 6 cannot be to the left of parent part...Really
Replies: 3
Views: 620

Re: Inset 6 cannot be to the left of parent part...Really

Carmen,

Can you post one of the cabinets and a full description of what you are changing? There's always a possibility a bug was introduced inadvertently and we need a repeatable scenario to work with.

-Clint-
by Clint Buechlein
Tue, Oct 16 2018, 2:01PM
Forum: Thermwood 3-Axis Machinery
Topic: Custom actions menu request
Replies: 6
Views: 1829

Re: Custom actions menu request

Thomas strembitsky wrote:thanks for doing this its a big quality of life improvement for us.

could you add the new program time estimator as a custom action as well. I see us using that frequently


Tom,

A little behind, but that should be in the THM version we released a few days ago.

-Clint-
by Clint Buechlein
Tue, Oct 16 2018, 7:24AM
Forum: Thermwood 3-Axis Machinery
Topic: Manual tool change
Replies: 6
Views: 1231

Re: Manual tool change

Morning Gentlemen, We have a similar situation where we have a few tools that are larger then the current tool holder can handle. We have made tools holders out of plastic to accommodate the larger tool. Is there some type of coding that can be called to: - have the machine go to home - shut off th...
by Clint Buechlein
Mon, Oct 15 2018, 10:34AM
Forum: eCabinet Systems Software
Topic: Dimensioning holes
Replies: 1
Views: 761

Re: Dimensioning holes

Chris, I see the same thing here, I'll pass it along to the software engineers. In the mean time, and as a recommendation, I wouldn't use Display Panels. I rarely ever use Display Panels for anything. I take a cabinet, eliminate all the pieces I don't need and use it as my panel. Then it is resizabl...
by Clint Buechlein
Fri, Oct 12 2018, 11:25AM
Forum: eCabinet Systems Software
Topic: Pocket Cutting Off Profiled Edge
Replies: 13
Views: 2375

Re: Pocket Cutting Off Profiled Edge

Troy,

Can you post the cabinet with the contour lines on it that you are trying to sweep? Also can you post the tool you are trying to sweep? I may be heading out early today so it may be Monday before I can take a look at it.

-Clint-

Go to advanced search