Search found 452 matches

by Clint Buechlein
Tue, Sep 21 2021, 12:26PM
Forum: Thermwood 3-Axis Machinery
Topic: Override Tool Life timer
Replies: 3
Views: 66

Re: Override Tool Life timer

Tommy, You're welcome. Technically after the tool is called you could use AFL to read the life, record it as a variable, run your program, then at the end of the program, use the variable to write the life back to what it was. But calling a different tool number you don't care about is easier. -Clint-
by Clint Buechlein
Mon, Sep 20 2021, 1:30PM
Forum: eCabinet Systems Software
Topic: Saving a Created Tool
Replies: 2
Views: 79

Re: Saving a Created Tool

I,m having trouble saving a tool profile. When I try to save a created profile I'm only given the aption to sav as an x_t file instead of a tol file. I've created and saved tools in the past (been a while), what am I doing wrong? Tom, You need to choose the Create Tool button (looks like an arrow p...
by Clint Buechlein
Mon, Sep 20 2021, 1:29PM
Forum: Thermwood 3-Axis Machinery
Topic: Override Tool Life timer
Replies: 3
Views: 66

Re: Override Tool Life timer

Tommy,

There is not, however instead of calling a tool number you use, set up a tool number that has same pickup and drop off location as the tool you typically use. The machine will still pick up the same tool to run the program and count away life for that tool.

-Clint-
by Clint Buechlein
Mon, Sep 20 2021, 8:00AM
Forum: eCabinet Systems Software
Topic: Forensic study of downloaded cabinets
Replies: 3
Views: 102

Re: Forensic study of downloaded cabinets

Gene,

Can you post the cabinet or point me to the specific cabinet and library it is in?

-Clint-
by Clint Buechlein
Fri, Sep 17 2021, 2:19PM
Forum: eCabinet Systems Software
Topic: Forensic study of downloaded cabinets
Replies: 3
Views: 102

Re: Forensic study of downloaded cabinets

Gene, Two things I can see from your images: One is that the parts in the image are likely for a top, it is just set as Top Stretcher. You'd need to look at the Construction Parameters for the top to see the settings. The second is at the top left of the Construction Settings it shows Add Stretcher ...
by Clint Buechlein
Tue, Sep 14 2021, 8:43AM
Forum: Thermwood 3-Axis Machinery
Topic: Handling Sheets
Replies: 3
Views: 188

Re: Handling Sheets

Clint, kind of like that. So I am almost scared to ask but what is the cost of that from T-Wood? And you are flipping 4x8 plywood and we need 5x10 melamine that is full of holes already - will it stay intact doing that? One thing about the vacuum lift is we can pick off the stack by the machine and...
by Clint Buechlein
Fri, Sep 10 2021, 3:46PM
Forum: Thermwood 3-Axis Machinery
Topic: Handling Sheets
Replies: 3
Views: 188

Re: Handling Sheets

You mean like a cool sheet flip device https://www.youtube.com/watch?v=7eoU1nY_l1k.

PS That's my hand in the video, if you happen to know anyone looking for a hand model :D

-Clint-
by Clint Buechlein
Thu, Sep 09 2021, 7:09AM
Forum: eCabinet Systems Software
Topic: How can this be made?
Replies: 5
Views: 259

Re: How can this be made?

Gene, While I usually am not always the best at catching all the details on the first go, I believe you could make this much easier using the Std Base Frameless cabinet. Delete the back, set your toe kick height to the height of the bottom vertical piece, set cabinet dimensions, add your shelves, on...
by Clint Buechlein
Fri, Sep 03 2021, 1:38PM
Forum: Thermwood 3-Axis Machinery
Topic: M61L8 being ignored
Replies: 3
Views: 323

Re: M61L8 being ignored

Thanks Clint, Daniel helped me sort it a little while ago. What's odd is the machine came with M61L8 set already. For whatever reason we didn't look at it during our test cut. I think we manually popped the pins up and didn't even notice they hadn't gone down. Forrest Good deal. Each machine gets s...
by Clint Buechlein
Fri, Sep 03 2021, 9:57AM
Forum: Thermwood 3-Axis Machinery
Topic: M61L8 being ignored
Replies: 3
Views: 323

Re: M61L8 being ignored

Brand new CS43 for some reason ignoring the pop up and down pin command. There's 19 years between this machine and my C40 so not sure if I'm missing something or not. The commands are there but it skips right over them. Forrest Forrest, CS43s use output 1 for pop up pins. Should need M61L1 and M62L...
by Clint Buechlein
Tue, Aug 31 2021, 8:36AM
Forum: Thermwood 3-Axis Machinery
Topic: Clint: Label request
Replies: 2
Views: 332

Re: Clint: Label request

Hey Clint, me here to bother you about labels again. The last one you made with the red sorting numbers has been awesome. Just today I was thinking of one more thing that would make them perfect: Could there be a colored square unique to the job to identify at a distance which job a part goes to? W...
by Clint Buechlein
Thu, Aug 26 2021, 9:13AM
Forum: Thermwood 3-Axis Machinery
Topic: version 11 thm desktop
Replies: 1
Views: 271

Re: version 11 thm desktop

Thomas strembitsky wrote:when will the version 11 update be out for thm desktop. i want to try it out there first before loading it on the machine


I sent you a private message.

-Clint-
by Clint Buechlein
Wed, Aug 18 2021, 2:32PM
Forum: Thermwood 3-Axis Machinery
Topic: backpocket not cutting
Replies: 14
Views: 1025

Re: backpocket not cutting

Jacob Janzen wrote:Clint,

Thanks! I fixed the geometries back to original and it worked great!

Jacob


Jacob,

Good deal, glad you were able to get it fixed.

-Clint-
by Clint Buechlein
Tue, Aug 17 2021, 2:25PM
Forum: Thermwood 3-Axis Machinery
Topic: backpocket not cutting
Replies: 14
Views: 1025

Re: backpocket not cutting

Clint, It wasn't showing the pocket on the backside operation on the Nest Overview... Was it in fact going to cut the backpocket? It didn't look like it was going to on the display. I'll take another look at it. Thanks, Jacob Jacob, Ignore my previous reply, I was in left field (or somewhere left o...
by Clint Buechlein
Tue, Aug 17 2021, 10:56AM
Forum: Thermwood 3-Axis Machinery
Topic: backpocket not cutting
Replies: 14
Views: 1025

Re: backpocket not cutting

Jacob, As far as I can tell it is working as I would expect it to. Part of the disconnect may be an understanding of how Control Nesting handles operations. With DXFs, singled sided material isn't an option. If the material isn't defined as single sided for any file type Control Nesting looks at whi...

Go to advanced search