Search found 401 matches

by Brad McIntosh
Tue, Apr 23 2019, 7:25AM
Forum: eCabinet Systems Software
Topic: Curious minds want to know....
Replies: 6
Views: 262

Re: Curious minds want to know....

I second Scott's answers for both.

:beer:
by Brad McIntosh
Mon, Mar 04 2019, 10:54AM
Forum: eCabinet Systems Software
Topic: RELIEF HELP ME
Replies: 7
Views: 611

Re: RELIEF HELP ME

I did this in Vectric VCarve Pro in about 5 minutes. ⋅ Imported the raster image. ⋅ Traced the raster image. ⋅ Quickly fixed up the vectors. (Could use a little more "massaging".) ⋅ Defined a "Profile" tool path with "square corners&qu...
by Brad McIntosh
Wed, Feb 27 2019, 3:42PM
Forum: eCabinet Systems Software
Topic: Hp Printers - No leaders
Replies: 8
Views: 650

Re: Hp Printers - No leaders

Just some stabs here.... Try checking the Printer Settings in the Printer Properties under Windows - particularly any "Advanced" settings. Look at things such as an "Econo" mode, "Graphics Density", "Halftoning" or other settings that could effect the "da...
by Brad McIntosh
Wed, Feb 27 2019, 3:37PM
Forum: Thermwood 3-Axis Machinery
Topic: outline breaks mortise shoulder for blind tenon
Replies: 7
Views: 522

Re: outline breaks mortise shoulder for blind tenon

Since it started happening more frequently, I too would think "core material adhesion" (less glue/resins holding board together).

You mentioned 16000 RPM at 600 ipm. Perhaps try increasing the RPM to 18000. Smaller bites might result in lower forces on the material.
by Brad McIntosh
Tue, Dec 11 2018, 4:00PM
Forum: Lounge
Topic: Holiday Deer
Replies: 5
Views: 1639

Re: Holiday Deer

Sorry... did not look that closely. They are the only ones I have. :(
by Brad McIntosh
Tue, Dec 11 2018, 2:44PM
Forum: Lounge
Topic: Holiday Deer
Replies: 5
Views: 1639

Re: Holiday Deer

Rob,

Here you go. These are the original files that I found from December 1999.

https://cncautomation.sharepoint.com/:u ... Q?e=WdvV3S

Happy Holidays!
by Brad McIntosh
Wed, Nov 28 2018, 8:42AM
Forum: eCabinet Systems Software
Topic: Message?
Replies: 4
Views: 923

Re: Message?

Ian, Thermwood announced eCabinet Systems 6.2.3 yesterday using various notification/messaging methods. One of Thermwood 's announcements on this forum: http://www.thermwood.com/forums/viewtopic.php?f=3&t=17717 The link to the update is here... eCabinet Systems 6.2.3 Available - http://www.ecabi...
by Brad McIntosh
Thu, Nov 22 2018, 9:38AM
Forum: Thermwood 3-Axis Machinery
Topic: Laminate and melamin chipping
Replies: 1
Views: 589

Re: Laminate and melamin chipping

Dan, Since the RAMP LENGTH will affect the [b] ramp-in angle [/b] with different materials, you may want to increase the RAMP LENGTH for that thicker material to achieve a similar " ramp-in angle ". >> Alternatively, you could leave the RAMP LENGTH alone and set just the PRE-RAMP DEPTH dee...
by Brad McIntosh
Thu, Nov 22 2018, 9:33AM
Forum: eCabinet Systems Software
Topic: Message?
Replies: 4
Views: 923

Re: Message?

Ian,

Yes, we too are getting this message.

I am sure that Thermwood is aware of this and they will have an update available as soon as they return from their Thanksgiving long weekend.

BTW: Happy Thanksgiving to all our American friends! :D
by Brad McIntosh
Wed, Nov 21 2018, 10:10AM
Forum: Thermwood 3-Axis Machinery
Topic: Layers
Replies: 2
Views: 627

Re: Layers

Audrey, We have a PDF document that covers the DXF layer names, etc. Please send us an email at software@cncautomation.com and we will send you the most recent version of the document. Nous avons un document PDF décrivant les noms des couches DXF, etc. Envoyez-nous un courrier électronique à l'adres...
by Brad McIntosh
Mon, Nov 05 2018, 11:46AM
Forum: Thermwood 3-Axis Machinery
Topic: issue with intime kernel
Replies: 2
Views: 781

Re: issue with intime kernel

Thomas, On this lower level side relating to the INTime Kernel , I am not an expert but... I believe that as this application deals with creating low-level hooks between the THM application and the I/O of the machine components, I understand that it is important that it gets loaded EARLY in the star...
by Brad McIntosh
Tue, Oct 30 2018, 9:51AM
Forum: Thermwood 3-Axis Machinery
Topic: Thermwoods run on Windows why not Linux
Replies: 3
Views: 902

Re: Thermwoods run on Windows why not Linux

If I am not mistaken - The discontinuation of Windows Support on a particular Windows OS version does not mean that that operating system version no longer functions. The discontinuation of support just means that security patches are no longer developed and distributed. Based on the basic requireme...
by Brad McIntosh
Thu, Oct 04 2018, 9:41AM
Forum: Thermwood 3-Axis Machinery
Topic: Manual tool change
Replies: 6
Views: 1748

Re: Manual tool change

The other issues that could arise with adding a Side-Load to your tool changer are: ⋅ Dust Hood Size - Since "Side-Loading" requires a lateral move to during the tool load/unload, the dust hood needs to be large enough to accomodate the move while it is down over the bracket. &sd...
by Brad McIntosh
Mon, Oct 01 2018, 8:11AM
Forum: Thermwood 3-Axis Machinery
Topic: Offfall setting in CN
Replies: 5
Views: 1261

Re: Offfall setting in CN

Okay. Then it may be that the switch back to NONE is not triggering an automatic re-nest. I am sure that this should be an easy one for the Control Nesting team.

* Just wonder why you would be flipping back and forth between the setting though. (Not that you should not be able to.)
by Brad McIntosh
Fri, Sep 28 2018, 1:08PM
Forum: Thermwood 3-Axis Machinery
Topic: Offfall setting in CN
Replies: 5
Views: 1261

Re: Offfall setting in CN

Are you Nesting/Optimizing and THEN changing the settings. If so, perhaps try re-nesting. (??)

Go to advanced search