Search found 121 matches

by Terry Hall
Tue, Nov 24 2020, 7:47AM
Forum: eCabinet Systems Software
Topic: updated now program cant do math
Replies: 5
Views: 1566

Re: updated now program cant do math

Right back at you pal :beer:
by Terry Hall
Sat, Nov 21 2020, 8:09AM
Forum: eCabinet Systems Software
Topic: updated now program cant do math
Replies: 5
Views: 1566

Re: updated now program cant do math

Jack, mine works fine. If I check detached toe, then leave my toekick height I get what you're getting.
by Terry Hall
Tue, Oct 15 2019, 2:00PM
Forum: eCabinet Systems Software
Topic: Deck Float Won't Go Away
Replies: 5
Views: 4336

Re: Deck Float Won't Go Away

Clint it was an older seed cabinet and I deleted it and made a new one from standard cabinets directory. The problem went away with the new one.
by Terry Hall
Sat, Oct 12 2019, 6:38AM
Forum: eCabinet Systems Software
Topic: Deck Float Won't Go Away
Replies: 5
Views: 4336

Re: Deck Float Won't Go Away

Thanks Leo. I did try a few other cabinets that I had in my multiple directories. They did exactly the same thing. I hadn't thought about trying one in the standard directory per your suggestion, and when I did, that worked. Thanks again. :beer:
by Terry Hall
Fri, Oct 11 2019, 1:46PM
Forum: eCabinet Systems Software
Topic: Deck Float Won't Go Away
Replies: 5
Views: 4336

Deck Float Won't Go Away

I'm trying build an open face frame cabinet with no deck and no shelves. When I spec no deck the stiles are .6262" shorter than the cabinet sides. I look in face frames & it automatically puts .6262 in deck float and I can't delete it, and when I put a zero in deck float and go back to the ...
by Terry Hall
Wed, Sep 18 2019, 6:49AM
Forum: eCabinet Systems Software
Topic: Flip Ops Not Quite Right
Replies: 6
Views: 4154

Re: Flip Ops Not Quite Right

Thanks Clint and Forrest, I should have posted it sooner. I changed it to .125 and it worked fine.
by Terry Hall
Wed, Aug 28 2019, 6:02AM
Forum: eCabinet Systems Software
Topic: Flip Ops Not Quite Right
Replies: 6
Views: 4154

Re: Flip Ops Not Quite Right

Thanks Clint. I believe you're right. I haven't tired it yet, but It did work at one time and I believe I may have changed it to try to get more out of a sheet some time back, but never changed it back. I'll give it a shot in the next few weeks.
by Terry Hall
Mon, Aug 26 2019, 1:59PM
Forum: eCabinet Systems Software
Topic: Flip Ops Not Quite Right
Replies: 6
Views: 4154

Re: Flip Ops Not Quite Right

Thank you Clint. It's set on .03125. Version 1.21.3
by Terry Hall
Mon, Aug 26 2019, 10:21AM
Forum: eCabinet Systems Software
Topic: Flip Ops Not Quite Right
Replies: 6
Views: 4154

Flip Ops Not Quite Right

I have three alignment pins along X & when I cut sheets for parts all works fine & is spot on for dims. However when I cut a full sheet with say two 24" sides with tenons, one tenon will be spot on at say 3/8", but the other will be less at maybe a 1/4" and both are set at 3/8...
by Terry Hall
Fri, Mar 15 2019, 12:49PM
Forum: eCabinet Systems Software
Topic: Shelf Standards or pilasters
Replies: 8
Views: 5428

Re: Shelf Standards or pilasters

I almost wonder if one could set up partitions, then just cut the dado and not the partition itself.
by Terry Hall
Tue, Mar 12 2019, 8:07AM
Forum: eCabinet Systems Software
Topic: Hp Printers - No leaders
Replies: 8
Views: 5181

Re: Hp Printers - No leaders

Here is something interesting, to me anyway. My printer prints the leaders fine in my other cad programs, just not in Ecabinets. It's something specific to Ecabinets apparently, but I haven't figured it out yet. Maybe TMC would have some idea(s).
by Terry Hall
Fri, Mar 08 2019, 8:24AM
Forum: eCabinet Systems Software
Topic: Hp Printers - No leaders
Replies: 8
Views: 5181

Re: Hp Printers - No leaders

Nope, thanks anyway Kerry, but the Universal Print Driver didn't work for me. Message said it wasn't compatible with my printer. Maybe my printer is too old, I've probably had it for 5 or six years. :wall:
by Terry Hall
Fri, Mar 01 2019, 2:11PM
Forum: eCabinet Systems Software
Topic: Hp Printers - No leaders
Replies: 8
Views: 5181

Re: Hp Printers - No leaders

Thanks Brad I'll look at that.

Just saw your post Kerry. For sure and thanks, I'm going to download that this afternoon after I get done spraying some cabinet doors. :D
by Terry Hall
Fri, Mar 01 2019, 12:23PM
Forum: eCabinet Systems Software
Topic: Ecab gets stuck returning to Custom Layout from LDE
Replies: 8
Views: 4751

Re: Ecab gets stuck returning to Custom Layout from LDE

I tried it just as you described Leo. Mine does not do that and I've done what you are doing in the past and don't recall it ever doing it. I'd say you're right that it's probably a driver problem. You downloaded from Nvidia's site I assume. I always download from there and wish there was a way to p...
by Terry Hall
Wed, Feb 27 2019, 10:11AM
Forum: eCabinet Systems Software
Topic: Hp Printers - No leaders
Replies: 8
Views: 5181

Re: Hp Printers - No leaders

Right Ralph, I use Windows 10 and when it installs updates for my Nvidia driver I have to remove it and go to the Nvidia website for the driver. It hasn't been as bad lately, not sure why. I've checked HP's website for a new driver to no avail. I've installed and re-installed from my disk, but also ...

Go to advanced search