Search found 170 matches

by Paul Ellis
Thu, Feb 28 2008, 8:44AM
Forum: eCabinet Systems Software
Topic: Version 5.2
Replies: 36
Views: 3961

Re: Version 5.2

I can hear the drum roll...but alas...nothing.
It is now Thursday and the week is almost to an end...SIGHHHHH!!!!
by Paul Ellis
Wed, Feb 27 2008, 7:14AM
Forum: eCabinet Systems Software
Topic: door gaps
Replies: 24
Views: 2238

Re: door gaps

:oops: I feel like a fool! I tried my method with a standard cabinet and got the same results as Dan and Kerry and whoever else tried it. The doors stayed equal widths and strayed over to the one side. Then I opened one of the cabinets that worked...mmmm and found the difference. These were cabinets...
by Paul Ellis
Tue, Feb 26 2008, 2:27AM
Forum: eCabinet Systems Software
Topic: door gaps
Replies: 24
Views: 2238

Re: door gaps

After posting and re-reading my post above, it sounded very blunt to me. I did not mean it that way. Gene's solution is a very viable one and just once more goes to show that most of the time different solutions exist and you should choose one that suits your way of working/thinking the best. Cheers...
by Paul Ellis
Tue, Feb 26 2008, 2:04AM
Forum: eCabinet Systems Software
Topic: door gaps
Replies: 24
Views: 2238

Re: door gaps

Gene's solution is also an alternative and that is the way I used to do it. But the function already exist in the software to have unequal sized doors. Glenn, After placing your doors, single left click ONE of the doors and then go to construction settings. THEN make sure you change the OPEN side re...
by Paul Ellis
Sun, Feb 24 2008, 4:30PM
Forum: eCabinet Systems Software
Topic: OT - AIDS
Replies: 9
Views: 863

Re: OT - AIDS

Lost? Who ever gets lost?
To quote a character from one of Terry Pratchet's books...
(This is not an exact quote but the idea is there)
"I am never lost. I always know where I am...it's the rest of the world that doesn't know where I am!"
by Paul Ellis
Sun, Feb 24 2008, 4:24PM
Forum: eCabinet Systems Software
Topic: door gaps
Replies: 24
Views: 2238

Re: door gaps

Matt, Unequal double doors. Here's the steps that I take 1. Add your double doors.(They are now equal in width) Oh and specify your gap settings 2. For argument sake - your doors are now 13 in each. While still in door/drawer editor, select the right hand one and right click 3. Go to construction se...
by Paul Ellis
Sun, Feb 24 2008, 3:58PM
Forum: eCabinet Systems Software
Topic: Ambassadors
Replies: 14
Views: 1277

Re: Ambassadors

Dan, I think it will be a great idea. This I say with some reserve. Obviously a lot more research and brain storming would have to go into this idea. We unfortunately do not live in a perfect world and the chance of someone that is 'appointed' as an ambassodor giving advice that is detrimental to th...
by Paul Ellis
Sun, Feb 24 2008, 3:34PM
Forum: eCabinet Systems Software
Topic: OT - AIDS
Replies: 9
Views: 863

Re: OT - AIDS

Nic,
Thanks for stepping in .... but I just let it slide...I know that these Americans can't read a map. Christopher Columbus thought he was in India when he 'discovered' America! (Now this is what I call stirring it up - If this doesn't start something then nothing will!!!) :lol: :beer:
by Paul Ellis
Thu, Feb 21 2008, 5:37AM
Forum: eCabinet Systems Software
Topic: OT - AIDS
Replies: 9
Views: 863

OT - AIDS

I was at the doctor today and he told me that all those years of phone sex caught up with me...Now I have AIDS - hearing aids that is!




It is SOOOOO good to hear people again....and the good thing is if I don't want to listen to them I just take it out!!!
by Paul Ellis
Mon, Feb 18 2008, 3:33AM
Forum: eCabinet Systems Software
Topic: Need a mew registration code
Replies: 12
Views: 1063

Re: Need a mew registration code

Snicker (only once)
by Paul Ellis
Tue, Feb 12 2008, 4:53AM
Forum: eCabinet Systems Software
Topic: Printing problems with nesting diagrams
Replies: 3
Views: 621

Re: Printing problems with nesting diagrams

Joey,
You are excused (but I still had a very good chuckle...as a matter of fact I am still ROFL)
by Paul Ellis
Tue, Feb 12 2008, 3:54AM
Forum: eCabinet Systems Software
Topic: Suggestions for future Ecabs
Replies: 6
Views: 822

Re: Suggestions for future Ecabs

Dave, Try a program like MWSnap or Snagit. You can capture part of the screen and paste this into your favourite word processor to print. This way you can hide, rotate zoom in and then capture and paste until you have all you need. Compile this into a presentable 'drawing plan' and print. Save this ...
by Paul Ellis
Sat, Feb 09 2008, 3:13AM
Forum: eCabinet Systems Software
Topic: slow processing
Replies: 12
Views: 1146

Re: slow processing

Lee, To get your drawings into a PDF you can install any of a number of free PDF writers. They install as printers, and then you select them as your printer from your drop-down list of printers. This should then open a 'save as' dialogoue where you may specify a filename. Just remember where you sav...
by Paul Ellis
Fri, Feb 08 2008, 3:44PM
Forum: eCabinet Systems Software
Topic: slow processing
Replies: 12
Views: 1146

Re: slow processing

Lee,
I see you mention that the response keep getting worse when you are in the LDE. The LDE is a BIG hogger of resources. Try and keep the drawings to a minimum. One thing that you could do is to print the LDE drawings to a PDF writer and save these. Then delete the drawings in e-cabs.
HTH
by Paul Ellis
Wed, Feb 06 2008, 2:43AM
Forum: Customer Tools
Topic: Pool balls
Replies: 8
Views: 40872

Re: Pool balls

Thx Damon,
Exactly my point...Everyone is so busy making (wood) dust, it sometimes takes a while...and the rest that follow
:wink: :wink: :wink:

Go to advanced search