Search found 281 matches

by Joe Soto
Fri, Oct 05 2012, 10:14PM
Forum: eCabinet Systems Software
Topic: Thermwood Adds "Personal Pause Button" to YouBuild
Replies: 6
Views: 4725

Re: Thermwood Adds "Personal Pause Button" to YouBuild

It works with both. I had a chance to use it today. It's a lot better than hitting the e-stop and you can do it from across the shop. Another feature is that the hold down vac stays on while the machine is paused. E-stop shuts my vac off, I'm assuming it does the same on all of them. I'm not sure if...
by Joe Soto
Wed, Mar 30 2011, 8:27PM
Forum: Thermwood 3-Axis Machinery
Topic: CV V5.65 adding Cut Through Depth
Replies: 1
Views: 1310

CV V5.65 adding Cut Through Depth

Cn is adding the cut through depth setting to chain commands (compin and compout) at the last line of feed even though the chains are not set to outline depth.

Thanks,
Joe
by Joe Soto
Wed, Mar 10 2010, 12:03AM
Forum: Thermwood 3-Axis Machinery
Topic: Machine warm up procedure ?
Replies: 1
Views: 1558

Re: Machine warm up procedure ?

Dale, Here is the one I use. You may need to modify it slightly for metric. Joe Warm up Program by Michael J Starry » Wed, Mar 19 2008, 8:24AM HERE IS THE WARM UP PROGRAM: (PROGRAM - SPINDLE WARM UP ROUTINE) (DATE - DEC-28-06) G90 G00 X0. Y0. Z0. (PICKS UP TOOL 2 AND RUNS FOR 10 MINUTES ) (GANTRY AN...
by Joe Soto
Thu, Mar 04 2010, 9:44PM
Forum: Lounge
Topic: I'm still kickin
Replies: 1
Views: 2552

Re: I'm still kickin

Glad to hear you are feeling better and looking forward to seeing you around here again.
Joe
by Joe Soto
Tue, Feb 02 2010, 10:27PM
Forum: Lounge
Topic: Closet ideas
Replies: 5
Views: 5520

Re: Closet ideas

Hey Jason, are you looking for someone to cut and edgeband the closet parts for you? I have a really nice router and bander so I could fix you up. :wink:
Joe
by Joe Soto
Wed, Jan 13 2010, 8:23PM
Forum: Thermwood 3-Axis Machinery
Topic: Off Fall in CN 5.49
Replies: 7
Views: 3454

Re: Off Fall in CN 5.49

Larry, the off-fall cut takes a 49x97 sheet and trims it down to 48.55 X 96.55 less the original parts and outline tool path. There are some times where eliminating the cut would allow a larger part to be cut out of the off-fall. Say a 24.25" x 96" countertop, the off-fall would not be lar...
by Joe Soto
Tue, Jan 12 2010, 9:57PM
Forum: Thermwood 3-Axis Machinery
Topic: Off Fall in CN 5.49
Replies: 7
Views: 3454

Re: Off Fall in CN 5.49

I would like to have the option to not cut the off-fall cut but still have CN keep track of the off-fall. This is the way it was in the previous versions. Cutting some jobs I end up with more usable off-fall that way.
by Joe Soto
Tue, Jan 12 2010, 9:43PM
Forum: Thermwood 3-Axis Machinery
Topic: Manual panel input and CN 5.49
Replies: 3
Views: 1569

Re: Manual panel input and CN 5.49

Sorry Ryan I could not get it repeat the errors yesterday or today. Even nesting the same parts.
by Joe Soto
Thu, Jan 07 2010, 5:42PM
Forum: Lounge
Topic: Happy Birthday
Replies: 4
Views: 4246

Re: Happy Birthday

Happy Birthday! :beer:
by Joe Soto
Thu, Jan 07 2010, 5:37PM
Forum: Thermwood 3-Axis Machinery
Topic: Manual panel input and CN 5.49
Replies: 3
Views: 1569

Manual panel input and CN 5.49

CN 5.49 and the manual panel are not working together very well. I am getting a lot of errors after clicking the write button. After clearing the errors, it takes several attempts to close CN. As soon as it closes the code gets written and all is good. So not a major problem just letting you know. T...
by Joe Soto
Fri, Dec 04 2009, 5:17PM
Forum: Thermwood 3-Axis Machinery
Topic: Any time frame on new release Control nesting?
Replies: 8
Views: 3628

Re: Any time frame on new release Control nesting?

[quote="Daniel Vonderheide"] If you have version 5.48 installed, there is a cancel button under the progress bar that will stop CN during nesting. FYI While nesting the cursor will not move allowing you to click the cancel button. Same thing on the graph screen. At least on mine. Thanks, Joe
by Joe Soto
Tue, Oct 06 2009, 10:55PM
Forum: Lounge
Topic: Pain in the neck!!!
Replies: 24
Views: 13547

Re: Pain in the neck!!!

Hey Dan, I'm glad to hear you are on the road to recovery. Get well soon.
by Joe Soto
Wed, Sep 02 2009, 8:06AM
Forum: Lounge
Topic: Pain in the neck!!!
Replies: 24
Views: 13547

Re: Pain in the neck!!!

Hang in there Dan, we are all pulling for you.
by Joe Soto
Thu, Aug 27 2009, 7:52AM
Forum: Lounge
Topic: Would like to know
Replies: 3
Views: 2777

Re: Would like to know

Hi Gary, I have a CS40 and a Fravol Smart 4 edgebander.
Joe

Go to advanced search