Search found 116 matches

by Kenneth Rychlik
Sun, Dec 27 2009, 12:29PM
Forum: eCabinet Systems Software
Topic: sides shorter than desired ??
Replies: 15
Views: 7103

Re: sides shorter than desired ??

I found that if I put in a value of .035 for deck float in the face frame construction settings, the sizes get back to normal. This works, but I still wonder why I had to do it.

Kenneth
by Kenneth Rychlik
Sun, Dec 27 2009, 12:21PM
Forum: eCabinet Systems Software
Topic: sides shorter than desired ??
Replies: 15
Views: 7103

Re: sides shorter than desired ??

I found something interesting. If I turn the face frames off the height of the sides and back go to the correct size. Also if I change global settings for the sheet stock to generic .75 it sizes the part correctly. When I change the material back to .715 thickness and or put the face frame back on, ...
by Kenneth Rychlik
Sun, Dec 27 2009, 11:10AM
Forum: eCabinet Systems Software
Topic: sides shorter than desired ??
Replies: 15
Views: 7103

Re: sides shorter than desired ??

Wally, I checked and they are all turned off and have none in the boxes for the edgebanding.

Thanks.
by Kenneth Rychlik
Sun, Dec 27 2009, 9:43AM
Forum: eCabinet Systems Software
Topic: sides shorter than desired ??
Replies: 15
Views: 7103

Re: sides shorter than desired ??

If you hover your pointer over the parts it will give you the size. The back and both sides are .035 less than the cabinet heigth and that is not normal.

Tim, it will open withought the jpeg.

Kenneth
by Kenneth Rychlik
Sat, Dec 26 2009, 10:49AM
Forum: eCabinet Systems Software
Topic: sides shorter than desired ??
Replies: 15
Views: 7103

sides shorter than desired ??

I am working on this cabinet and the sides are shorter than the whole cabinet. I have all the insets at zero for the sides and back, but the sides are stiill shorter. Does anyone have a thougth to what I may have done wrong?

Kenneth
by Kenneth Rychlik
Tue, Dec 22 2009, 1:39PM
Forum: eCabinet Systems Software
Topic: base 45 degree angle cabinet
Replies: 5
Views: 3224

Re: base 45 degree angle cabinet

I believe part editor is your only way. There is a recent post about doing a top cabinet like you are describing. The part editor could be a little more user friendly, but it will get it done.

Kenneth
by Kenneth Rychlik
Mon, Dec 21 2009, 7:25PM
Forum: eCabinet Systems Software
Topic: corner base back question
Replies: 2
Views: 1394

Re: corner base back question

Thanks Kerry.

I got it changed per the instructions on the last post, but when I try to make the parts fit together in the editor, it reverts back to all the same. I think I may give up on this one and just change materials.

Kenneth
by Kenneth Rychlik
Mon, Dec 21 2009, 12:24AM
Forum: eCabinet Systems Software
Topic: corner base back question
Replies: 2
Views: 1394

corner base back question

I am working with a corner base that has a clipped back. i want a 3/4 inch piece on the clipped part of the back, but .25 plywood for the left/back and right/back.

Under construction settings there is only one place to pick the back material. Am I asking for the impossible?

Kenneth
by Kenneth Rychlik
Tue, Dec 15 2009, 6:45PM
Forum: eCabinet Systems Software
Topic: end upper corner
Replies: 21
Views: 6956

Re: end upper corner

I finally got the darn program to do what I wanted. lol

Lorin, I can email you my file if you don't have one working yet.

Kenneth
by Kenneth Rychlik
Tue, Dec 15 2009, 12:53AM
Forum: eCabinet Systems Software
Topic: end upper corner
Replies: 21
Views: 6956

Re: end upper corner

Lorin, I am having trouble making it work too. I took a normal upper frameless cabinet and resized it to 12 inches wide. Next I deleted one side. Then highlight the top and take it to the part editor. Go to contour mode in part editor and you can draw the geometry there. Then get back out of contour...
by Kenneth Rychlik
Mon, Dec 14 2009, 10:32PM
Forum: eCabinet Systems Software
Topic: end upper corner
Replies: 21
Views: 6956

Re: end upper corner

lorin,

Are you just doing the design for display purposes or do you need to cut it on your machine as well?

Also do you need a center wall in it?

Kenneth
by Kenneth Rychlik
Wed, Dec 09 2009, 10:52PM
Forum: eCabinet Systems Software
Topic: .2 back with .25 bit ??
Replies: 18
Views: 5681

Re: .2 back with .25 bit ??

Ok Daniel, I'm starting to catch on. I was trying to make the dado/rabbet and let the bit cut off the edge a bit, but I see what you mean now. Oversize and trim the part. I did the design on my test cabient and it works. The constraint is kind of bugging me. I resized the cabinet and it seemed to st...
by Kenneth Rychlik
Wed, Dec 09 2009, 9:25PM
Forum: eCabinet Systems Software
Topic: .2 back with .25 bit ??
Replies: 18
Views: 5681

Re: .2 back with .25 bit ??

Thanks Daniel. I don't understand why the part would be cut to a depth of .749 I would only want it the same depth as the other dado's. Also I have LOTS of cabinets to do this to. How do you place the box to line it up and give it size parameters manually? And when I resize the cabinet will that mes...
by Kenneth Rychlik
Tue, Dec 08 2009, 10:33PM
Forum: eCabinet Systems Software
Topic: .2 back with .25 bit ??
Replies: 18
Views: 5681

Re: .2 back with .25 bit ??

Gary, I'm trying to get away without the manual tool change. I have run these parts in another program that allows this, but am trying to get ecabs to do it. In the other program I have to manually make each part and it's a pain to use. Kerry, I did that with the negative offset but when nesting in ...
by Kenneth Rychlik
Tue, Dec 08 2009, 6:40PM
Forum: eCabinet Systems Software
Topic: .2 back with .25 bit ??
Replies: 18
Views: 5681

Re: .2 back with .25 bit ??

George, Basically I want to have my machine cut down the edge of the part with some of the bit cutting into the edge of my part and some of the bit hanging off of the part. This is before the part is actually cut loose from the sheet. i can't get the program to do it so far, but I'm still trying. Ke...

Go to advanced search