Search found 352 matches

by Daniel Vonderheide
Mon, Apr 09 2012, 8:40AM
Forum: Thermwood 3-Axis Machinery
Topic: Edit Material A Side problem
Replies: 5
Views: 1639

Re: Edit Material A Side problem

We have recieved the files and I have confirmed the issue. I have informed the software engineers. Thank you.
by Daniel Vonderheide
Mon, Apr 09 2012, 8:32AM
Forum: Thermwood 3-Axis Machinery
Topic: CN:5.70 issue on waste board settings
Replies: 7
Views: 1475

Re: CN:5.70 issue on waste board settings

The newest version of Control Nesting allows you to create settings for each material group from the tooling area. If you set your wasteboard thickness in the settings area of control nesting, make sure you are setting the wasteboard in the correct group. You can see and change the groups in the set...
by Daniel Vonderheide
Thu, Mar 29 2012, 7:28AM
Forum: Thermwood 3-Axis Machinery
Topic: THM Sync
Replies: 6
Views: 1210

Re: THM Sync

Yes there is an update. I will email it to you here shortly.
by Daniel Vonderheide
Thu, Mar 29 2012, 7:27AM
Forum: Thermwood 3-Axis Machinery
Topic: Odd KD on Flip Opps
Replies: 5
Views: 1105

Re: Odd KD on Flip Opps

Your export file does not have the same twd file loaded that created the CNC file. Please email me the twd file and the job file from ecabinets to program@thermwood.com. Also, if you are using the newer version of ecabinets, v6.0 build 8, you will need to download the 5.59 patch from the website.
by Daniel Vonderheide
Thu, Mar 22 2012, 7:21AM
Forum: Thermwood 3-Axis Machinery
Topic: Auto lube on table rails not functioning well
Replies: 2
Views: 797

Re: Auto lube on table rails not functioning well

Check the oiler to see how often it drips oil. It should drip one drop every 2 to 5 seconds. If it is not, adjust the set screw for the oil, not the air. You may also want to turn your air pressure back down to the original pressure before you check this. If you need more information, contact our se...
by Daniel Vonderheide
Fri, Mar 09 2012, 8:33AM
Forum: Thermwood 3-Axis Machinery
Topic: Pocket cleanup pass first on flip op?????
Replies: 2
Views: 702

Re: Pocket cleanup pass first on flip op?????

What version of Control Nesting are you using on the machine? This was an issue in earlier versions. If you can get me the version number and the export file from the controller we can test it here to see if it is an error that has already been addressed or if it is a new issue. Please email all of ...
by Daniel Vonderheide
Tue, Mar 06 2012, 9:01AM
Forum: Thermwood 5-Axis Machinery
Topic: 5-axis Length Comp, part 2
Replies: 1
Views: 3084

Re: 5-axis Length Comp, part 2

We've been looking at the files you have sent in and it seems that the tool call prior to each M922 or M923 is causing the issue. The Qcore performs tool changes differently than the V7 and V5 and this difference is what allows it to work in V5 and V7 but not in V8. If you remove all of the unneeded...
by Daniel Vonderheide
Mon, Mar 05 2012, 9:27AM
Forum: Thermwood 3-Axis Machinery
Topic: Cut through depth added to chain
Replies: 6
Views: 1341

Re: Cut through depth added to chain

josh,

email me the export from your machine with this job loaded. I will look into it. Program@Thermwood.com
by Daniel Vonderheide
Tue, Feb 14 2012, 11:29AM
Forum: Thermwood 5-Axis Machinery
Topic: 5-axis length comp
Replies: 2
Views: 3457

Re: 5-axis length comp

This scenerio has been tested and it does work in Version 8 software.
by Daniel Vonderheide
Mon, Feb 13 2012, 10:20AM
Forum: Thermwood 3-Axis Machinery
Topic: Tooling Setup Order
Replies: 3
Views: 698

Re: Tooling Setup Order

Sorry for the delayed response. i was out last week. If you are using a DXF file, then you can define the layer names with an order number so it performs the operations in the order you describe. If you are using a TWD file there is no way to define the order of operations.
by Daniel Vonderheide
Fri, Feb 03 2012, 9:22AM
Forum: Thermwood 3-Axis Machinery
Topic: Tooling Setup Order
Replies: 3
Views: 698

Re: Tooling Setup Order

Josh,
Sorry but it doesn't work that way. The operations list doesn't determine what operation will be performed in what order, it only determines the order the tools are looked at when a operation is choosing a tool.
by Daniel Vonderheide
Thu, Jan 26 2012, 11:47AM
Forum: Thermwood 3-Axis Machinery
Topic: larger tool selection for tenon thickness
Replies: 9
Views: 1957

Re: larger tool selection for tenon thickness

Scott,

This has not changed. At the present time, it still looks at the tennon's width and uses a tool that is 1/2 the width to the full width of the tennon.
by Daniel Vonderheide
Wed, Jan 04 2012, 9:01AM
Forum: Thermwood 5-Axis Machinery
Topic: HOMING ERROR
Replies: 2
Views: 3300

Re: HOMING ERROR

Mohammed,

The error that you are getting is because there is too large of a value for the B axis in your c-marker adjustment table. If you have a large value in the table because of alignments, you will need to re-belt and realign the axis.
by Daniel Vonderheide
Wed, Jan 04 2012, 8:07AM
Forum: Thermwood 3-Axis Machinery
Topic: CN Printed Sheets
Replies: 3
Views: 777

Re: CN Printed Sheets

The sheets are not created in Crystal Reports. Sorry, there's no way that you can change the page layout. You can modify it somewhat, inside of Control Nesting ,in the print screen by clicking the sheet settings button. In Ecabinets, you cannot modify it at all.
by Daniel Vonderheide
Tue, Jan 03 2012, 8:08AM
Forum: Thermwood 3-Axis Machinery
Topic: CN Printed Sheets
Replies: 3
Views: 777

Re: CN Printed Sheets

The printed labels can be altered using Crystal Reports. Are you asking for the ones at the machine or in Ecabinets? If it is at the machine, they are stored in the "C:\rolling nest\labels\" directory. If it is the ones in Ecabinets, it is stored in the "C:\ProgramData\Thermwood\eCabi...

Go to advanced search