Search found 472 matches

by Jason Susnjara
Thu, Sep 22 2005, 7:32AM
Forum: Thermwood 3-Axis Machinery
Topic: Lable info
Replies: 5
Views: 1044

Hi Nick,

Eventually we want to add Crystal Reports software to ours. There are license fees and other things that we have to consider when doing this plus the time to program.
by Jason Susnjara
Tue, Sep 20 2005, 4:02PM
Forum: Thermwood 3-Axis Machinery
Topic: Upgrade please
Replies: 6
Views: 1126

Yes they are
by Jason Susnjara
Tue, Sep 20 2005, 3:59PM
Forum: Thermwood 3-Axis Machinery
Topic: Upgrade please
Replies: 6
Views: 1126

Hi Paul, I belive that there are other postings on this site that explain the offalls. We don't show it yet in the nesting area but offalls can be located in the G901 location as well as being able to rotate the offall in any direction. I will get some more info on this after I talk to the programme...
by Jason Susnjara
Mon, Sep 19 2005, 1:42PM
Forum: Thermwood 3-Axis Machinery
Topic: DXF files
Replies: 4
Views: 963

Hi Nick, At this time we do not have any feature like this for machining a pre-cut part. RN will put a clearance on the outside of the part so that it can nest it. You will also need a layer name for the outline. You can try to do this and then etch the spoilboard first and then place your part over...
by Jason Susnjara
Fri, Sep 16 2005, 8:12AM
Forum: Thermwood 3-Axis Machinery
Topic: vacuum
Replies: 9
Views: 1837

Hi,

If you have small parts that are moving on you, make sure that you have a double pass set for those pieces. Also make sure that your spoilboard and/or wasteboard is clean and that you have as less cuts as possible on the surface. This will cause small parts to move.
by Jason Susnjara
Mon, Sep 12 2005, 7:55AM
Forum: Thermwood 3-Axis Machinery
Topic: Missing Flip Operation
Replies: 4
Views: 945

Hi Bill,

The new update should fix this problem.

thanks,
by Jason Susnjara
Wed, Sep 07 2005, 9:09AM
Forum: Thermwood 3-Axis Machinery
Topic: Cutter speeds
Replies: 28
Views: 5087

Hi Bill,

We use Duramine Thermofused melamine.
by Jason Susnjara
Wed, Sep 07 2005, 7:51AM
Forum: Thermwood 3-Axis Machinery
Topic: Cutter speeds
Replies: 28
Views: 5087

Guys, Another consideration would be the cut direction. I seem to find that a conventional cut will give me a better edge than a climb cut. At one point I used the 3/8 tool for the outline but then switched to a Vortex .5 3 flute compression bit. I love this tool. I run at 18000 rpms and around 700 ...
by Jason Susnjara
Thu, Sep 01 2005, 1:01PM
Forum: eCabinet Systems Software
Topic: The effects of Gas
Replies: 24
Views: 4995

Mike,

I know that materials for building my house went up considerably just because of the war in Iraq and that was last year. I cannot image what the cost for materials would be now with gas prices going up and with the soon to be rebuilding of the southeast region.
by Jason Susnjara
Tue, Aug 30 2005, 9:47AM
Forum: Customer Images
Topic: Something a little different (for me)
Replies: 16
Views: 3683

Hi Kerry,

Very impressive!!!!

Can you email me that file so I can take a look at how you built it? cabinets@thermwood.com

thanks,
by Jason Susnjara
Mon, Aug 29 2005, 3:16PM
Forum: Thermwood 3-Axis Machinery
Topic: THM.exe APPLICATION ERROR
Replies: 3
Views: 1077

Hi,

Nick is correct. We have had this error since we went to Windows 2000 for the operating system. This does not or affect anything with the controller or the software.

thanks,
by Jason Susnjara
Wed, Aug 24 2005, 7:16AM
Forum: Thermwood 3-Axis Machinery
Topic: Tool Change
Replies: 6
Views: 1280

Hi Bill, If the last X and Y position before the tool change was X21 Y21, you could either enter that in after the tool change or a different X and Y position. The machine needs to know where to go next after the tool change. You always want to move the machine to the correct X and Y coordinates bef...
by Jason Susnjara
Wed, Aug 24 2005, 7:06AM
Forum: Thermwood 3-Axis Machinery
Topic: Control Nesting 4.64 error
Replies: 7
Views: 1520

Hi Dave, The graph will have nothing to do with Rolling Nest. Perhaps you can email me the cnc and twd file to: cabinets@thermwood.com Another tip would be not to block step + when you are in cuttercomp. Once you are out of cuttercomp it is fine but as you seen in this example, the tool moved off of...
by Jason Susnjara
Tue, Aug 23 2005, 4:18PM
Forum: Thermwood 3-Axis Machinery
Topic: Control Nesting 4.64 error
Replies: 7
Views: 1520

Hi Dave,

Can you explain in greater detail. Are you trying graph using F3, F5? Do you have flip operations on this part?

thanks,
by Jason Susnjara
Tue, Aug 23 2005, 1:31PM
Forum: Thermwood 3-Axis Machinery
Topic: Tool Change
Replies: 6
Views: 1280

Hi Bill,

After the tool change, you will need an X and Y movement without the Z to the 1st point in your program. It would be better to have this in Absolute.

Go to advanced search