Search found 43 matches

by Chris Say
Mon, Jan 15 2007, 6:20PM
Forum: eCabinet Systems Software
Topic: Quick Question
Replies: 7
Views: 2639

I have received the cutpath error before and trying these constraints does not give the error. Yes, I am using a back to make the doors because with the vertical grain on the part and the face view it makes it easy to see what I have. I was unable to change the size of a display panel after adding i...
by Chris Say
Mon, Jan 15 2007, 3:52PM
Forum: eCabinet Systems Software
Topic: Quick Question
Replies: 7
Views: 2639

Hi Dan I hope you are having a great New Year! I'm not getting the error you talked about. I'm trying to make MDF doors. I want to do them with router bits we purchased so we can make the doors in two passes rather than \"model\" them and take many more. I made the parts from a cabinet par...
by Chris Say
Mon, Jan 15 2007, 12:59PM
Forum: eCabinet Systems Software
Topic: Quick Question
Replies: 7
Views: 2639

Thanks for your reply. I see the constraint manager and have used it. I am trying to use the constraint manager on parts with profile cuts. That has been unsuccessful in all my attempts.
by Chris Say
Thu, Jan 11 2007, 2:05PM
Forum: eCabinet Systems Software
Topic: Quick Question
Replies: 7
Views: 2639

Quick Question

I'm sure someone has already posted this. I would like to be able to put constraints on parts with profile cuts. If these parts are cut from a cabinet part then they would be \"sizeable\". My question is, Is this something that is already being worked on and when is it expected to be relea...
by Chris Say
Wed, Dec 27 2006, 1:46PM
Forum: Thermwood 3-Axis Machinery
Topic: machine is freezing on me
Replies: 2
Views: 1116

machine is freezing on me

in the start of sheets, the machines start mode run then don't go anywhere so u have to push eme. stop then if i try to start on the sheet agian it won't home it puts ifself on emergency stop
by Chris Say
Tue, Oct 17 2006, 5:41PM
Forum: Thermwood 3-Axis Machinery
Topic: wrong tool creating dado
Replies: 3
Views: 1390

Thanks for the input. It seems like David's idea explains what is going on. I will try to change the tooling order and see if it works. I was on an emotional rollercoaster last night with the Cardinals. It felt like I had my wallet stolen. They are called the Cardiac Cards for a reason. Go Big Red!!
by Chris Say
Tue, Oct 17 2006, 4:01PM
Forum: Thermwood 3-Axis Machinery
Topic: wrong tool creating dado
Replies: 3
Views: 1390

wrong tool creating dado

Sometime after we installed the control nesting build 5.02 our machine started to do our dados with a diferent bit then we wanted it to. i turned off the interpolate, the drill, and the route and it still wants to use that bit. i even tried to remove it from the tool list. the machined has always us...
by Chris Say
Wed, Oct 11 2006, 10:23AM
Forum: Thermwood 3-Axis Machinery
Topic: Nesting error
Replies: 3
Views: 1476

I am getting this error at the machine. I got a will not nest this part error in ecabinets for the left-right stretcher. When filtered, it nested correctly. I made it in build 9. I regenerated it in build 10 and resaved it and get the same error at the machine. Now when I nest it in ecabinets it sho...
by Chris Say
Fri, Oct 06 2006, 3:02PM
Forum: Thermwood 3-Axis Machinery
Topic: Nesting error
Replies: 3
Views: 1476

Nesting error

I loaded a job with part editor cuts and display panels and as soon as I click ok I get an error saying \"Data type conversion error\". What does this mean and what do I need to do to fix it? Here is the file if it helps.
by Chris Say
Fri, Sep 22 2006, 3:22PM
Forum: Thermwood 3-Axis Machinery
Topic: Tool errors
Replies: 2
Views: 1228

Tool errors

I have made a 20mm hole that I associated with some KD hardware. I have a drill bit that I want to use for the hole that is 20mm. We've tried to put the bit in the drill bank and the router with no luck. The error reads \"unable to find a tool to do a selected operation\". Where could the ...
by Chris Say
Wed, Sep 06 2006, 10:23AM
Forum: Thermwood 3-Axis Machinery
Topic: THM crash
Replies: 5
Views: 2269

Ryan

Thanks for the layout. I'll give it a shot.

Chris
by Chris Say
Tue, Sep 05 2006, 1:11PM
Forum: Thermwood 3-Axis Machinery
Topic: THM crash
Replies: 5
Views: 2269

What I did to get this file is send the cutlist to excel, then resaved it to a traveldrive and loaded it into the machine. It is the layout without any changes. Please let me know what I need to do.
by Chris Say
Fri, Sep 01 2006, 3:20PM
Forum: Thermwood 3-Axis Machinery
Topic: THM crash
Replies: 5
Views: 2269

THM crash

When we try to load an Excel file at the machine Thermwood Control crashes. I can click on load for excel files then select the file and click then I'm immediately sent to the desktop. Any suggestions?

Chris

Go to advanced search