Search found 553 matches

by Leo Graywacz
Fri, Jan 02 2015, 1:01PM
Forum: eCabinet Systems Software
Topic: Conestoga doors ignore partition and doors overlap
Replies: 6
Views: 2836

Re: Conestoga doors ignore partition and doors overlap

Yep, it's happening on a few of my cabinets. I was wrong about the matching color fixing it. Seems to have reverted back to the big space. Seems sorta random. Some doors/drawers do it, some don't I have a drawer and double door in the same cabinet (with 2 other pairs of doors). The drawer is fine wh...
by Leo Graywacz
Fri, Jan 02 2015, 12:09PM
Forum: eCabinet Systems Software
Topic: Mixed FF and Euro
Replies: 0
Views: 1269

Mixed FF and Euro

A lot of my cabs are mixed. I have FFs surrounding the outers of the cabinet and the insides are Euro, meaning tight margins (5/64") between doors with only the partition or fixed shelf behind the door/drawer. I remember being able to put a pair of doors into the cabinet by using a large offset...
by Leo Graywacz
Fri, Jan 02 2015, 12:04PM
Forum: eCabinet Systems Software
Topic: Conestoga doors ignore partition and doors overlap
Replies: 6
Views: 2836

Re: Conestoga doors ignore partition and doors overlap

I just had this happen in a FF cabinet. Looked good in the CE but brought it out to MAIN and then the doors shrunk leaving a large margin gap. I changed the texture of the door to match the FF and then the gap went to normal.
by Leo Graywacz
Sat, Dec 20 2014, 10:20PM
Forum: eCabinet Systems Software
Topic: Will this new update finally kill me off?
Replies: 9
Views: 2797

Re: Will this new update finally kill me off?

Well it looks like v6.15 will work. Still have to pot my video into cripple mode, but it does work still. I haven't done a new job on it yet so I hope everything will still function good. :beer:
by Leo Graywacz
Thu, Dec 11 2014, 7:53AM
Forum: eCabinet Systems Software
Topic: Thermwood CNC services in Conn
Replies: 7
Views: 2255

Re: Thermwood CNC services in Conn

Thanks for responding Josh. Do you per chance deliver after processing, or is it pick up only? I don't do that many full kitchens so I wouldn't be a prime customer. But if it works out it sure would make things easier. :mrgreen:
by Leo Graywacz
Wed, Dec 10 2014, 11:05PM
Forum: eCabinet Systems Software
Topic: Thermwood CNC services in Conn
Replies: 7
Views: 2255

Thermwood CNC services in Conn

Just had a job done by a conventional CNC by a local guy and wasn't very pleased with the product or the time to produce. I was wondering if there was a list of owners who would do work for others using the eCab program. At one time I know there was a guy in Conn that had one, but I don't have the i...
by Leo Graywacz
Fri, Nov 21 2014, 2:53AM
Forum: eCabinet Systems Software
Topic: Will this new update finally kill me off?
Replies: 9
Views: 2797

Re: Will this new update finally kill me off?

OK, the main problem I have is with the file IGLICD32.DLL. I had the original version that came with my computer, when I use this version I can't load the room without eCabs crashing. If I go into the cabinet editor it works find and is snappy and speedy. Then I did an upgrade to my video driver. I'...
by Leo Graywacz
Wed, Nov 19 2014, 1:47AM
Forum: eCabinet Systems Software
Topic: Will this new update finally kill me off?
Replies: 9
Views: 2797

Re: Will this new update finally kill me off?

I tried the force rendering. It does what you said. But it also kills the ability to have acceleration when I work in the cabinet editor. I guess it's back to manually switching between the two. Thanks
by Leo Graywacz
Tue, Nov 18 2014, 5:34PM
Forum: eCabinet Systems Software
Topic: Will this new update finally kill me off?
Replies: 9
Views: 2797

Re: Will this new update finally kill me off?

I'll try that. Thanks.
by Leo Graywacz
Tue, Nov 18 2014, 1:54PM
Forum: eCabinet Systems Software
Topic: Will this new update finally kill me off?
Replies: 9
Views: 2797

Re: Will this new update finally kill me off?

The graphics engine is exactly what I'm having issues with. The program is likely initiating program calls my computer is unfamiliar with. Uggg.
by Leo Graywacz
Tue, Nov 18 2014, 12:40PM
Forum: eCabinet Systems Software
Topic: Will this new update finally kill me off?
Replies: 9
Views: 2797

Will this new update finally kill me off?

The last update we had made is so I can only do the room edits with my video acceleration turned down to almost nothing otherwise right after it loaded it would crash. If I was just going to be in the cabinet editor I could use full acceleration. I have no updates on my video card to be found. So, w...
by Leo Graywacz
Sat, May 17 2014, 10:25AM
Forum: eCabinet Systems Software
Topic: render mode
Replies: 3
Views: 1777

Re: render mode

Go into the computer settings (right click on empty space on the desktop) and choose properties, settings, advanced, troubleshooting and then lower the hardware acceleration and choose apply. Keep lowering until it works. I have to put mine almost all the way to no acceleration for my renders to wor...
by Leo Graywacz
Fri, May 09 2014, 6:34PM
Forum: eCabinet Systems Software
Topic: Win XP and NET.Framework v4.0
Replies: 0
Views: 1273

Win XP and NET.Framework v4.0

Just did the Build 14 update. This required NET.Framework v4.0 to be installed. Took quite a while to install both. After that I had to reboot to update the system. When the boot started my desktop picture came up and then the machine hung there for over 90 seconds. I tried a few things and then wen...
by Leo Graywacz
Fri, May 09 2014, 9:28AM
Forum: eCabinet Systems Software
Topic: Door/Drawer editor problem?
Replies: 2
Views: 1191

Re: Door/Drawer editor problem?

I'm having a problem with the drawer editor too. It is crashing the program when I pick my standard drawer box. If I pick a butted drawer it works, but when I pick my dado built drawer it crashes. This is the drawer I used in all my previous cabinets. I figured maybe the drawer file got an error in ...
by Leo Graywacz
Mon, Mar 17 2014, 10:05PM
Forum: eCabinet Systems Software
Topic: V6 Build 13 Crashing
Replies: 10
Views: 2644

Re: V6 Build 13 Crashing

Darn close to the same driver I am using. You have the next update from mine. You are still using the integrated video from the motherboard. Go into the video settings on the computer (desktop, right click, properties, settings, advance, troubleshooting) and lower the acceleration two clicks down an...

Go to advanced search