Search found 681 matches

by Scott G Vaal
Wed, May 28 2008, 12:51PM
Forum: eCabinet Systems Software
Topic: Profile Edge
Replies: 3
Views: 1084

Re: Profile Edge

Leigh, Are you using the fillet command to create the radius corners (not the one in contour mode area)? I do it this way and then run a tool around it (that does not breech the corner rad.) and all works great. Being on the perimeter of the part like this will not even require you to add constraint...
by Scott G Vaal
Wed, May 28 2008, 10:28AM
Forum: eCabinet Systems Software
Topic: Adjustable Shelf Construction Settings Bug
Replies: 1
Views: 647

Re: Adjustable Shelf Construction Settings Bug

Joe,

We are aware of this message. It is benign and it will be resolved in a patch due out soon. The “wild numbers” you speak of are nothing new and are that way by design in several fields. This is to maintain accuracy for fit and depth clearances and shelf pin hole diameters and spacing.
by Scott G Vaal
Wed, May 28 2008, 7:53AM
Forum: eCabinet Systems Software
Topic: Consraints Changing Since V5.2 - B1
Replies: 3
Views: 1361

Re: Consraints Changing Since V5.2 - B1

Greg, You will unfortunately have to edit each one to resolve this. In previous versions eCabinet Systems made assumptions on equations that caused problems for entries requiring dimensions. The resolution unfortunately caused the symptoms you are seeing. 5.2 bld 2 (due out soon) will have the addit...
by Scott G Vaal
Wed, May 28 2008, 7:27AM
Forum: eCabinet Systems Software
Topic: Drawer box problem in version 5.2 and 5.1
Replies: 3
Views: 1427

Re: Drawer box problem in version 5.2 and 5.1

Dan,

I cannot check your job in 5.1 (because it was saved in 5.2), but this issue did exist in 5.1 and 5.2 bld 1. I examined your scenario here and it is the same issue that we have addressed for bld 2.
by Scott G Vaal
Tue, May 27 2008, 8:27AM
Forum: eCabinet Systems Software
Topic: MDF Door Tool Options
Replies: 2
Views: 812

Re: MDF Door Tool Options

Leigh, Yes it will. But please keep in mind, that it was designed to work with eCabinet Systems MDF doors which currently allow 2 profiles (interior & exterior). So, by you creating it via a back panel, it will use the Interior Custom tool for region #1 (the first profile cut path you created on...
by Scott G Vaal
Fri, May 23 2008, 1:56PM
Forum: eCabinet Systems Software
Topic: Rotate Part in Part editor
Replies: 4
Views: 1162

Re: Rotate Part in Part editor

Greg, The move and rotate functions in the Display Part Editor will only work for added peices and do not function on the 1st part loaded into the scene (which is considered the anchor part). So, if you load another stl/hsf in, you will be able to select it and do these operations to it. However, yo...
by Scott G Vaal
Fri, May 23 2008, 1:06PM
Forum: eCabinet Systems Software
Topic: Door reveal problem.
Replies: 6
Views: 2056

Re: Door reveal problem.

Gene & Terry,

We are aware of this issue. Sorry for the inconvenience. We plan to have a patch available to fix this. I can not give a time when the patch will be available yet, but know that we are working as diligently as possible. We appreciate your patience.
by Scott G Vaal
Fri, May 23 2008, 8:59AM
Forum: eCabinet Systems Software
Topic: Moving in custom layout
Replies: 2
Views: 815

Re: Moving in custom layout

Jason, You can also rotate the Overhead/Main view and click on items to select it. Then you can press the Home key to get back to straight overhead view. You can move items while in a rotated position as well but keep in mind the movement may seem odd based on the rotation you are at (movement is al...
by Scott G Vaal
Thu, May 22 2008, 9:53AM
Forum: eCabinet Systems Software
Topic: Fatal error
Replies: 4
Views: 1808

Re: Fatal error

Sergio,

That message means that the memory has been exhausted. Is this something you can reproduce with a certain job?
by Scott G Vaal
Thu, May 22 2008, 9:31AM
Forum: eCabinet Systems Software
Topic: Fatal error
Replies: 4
Views: 1808

Re: Fatal error

Sergio,

How much RAM does you computer have?
by Scott G Vaal
Tue, May 20 2008, 1:08PM
Forum: eCabinet Systems Software
Topic: 5.2 Crashing
Replies: 15
Views: 4549

Re: 5.2 Crashing

Darrel,

If you can post that job and some steps to create a crash, that could be helpful for us in determining the cause. Please post it if you can.
by Scott G Vaal
Thu, May 15 2008, 9:48AM
Forum: eCabinet Systems Software
Topic: sample_stls
Replies: 5
Views: 1194

Re: sample_stls

Jean,

I unzipped it into a directory under Import and it loads ok for me. Did you unzip it??
by Scott G Vaal
Thu, May 15 2008, 8:57AM
Forum: eCabinet Systems Software
Topic: sample_stls
Replies: 5
Views: 1194

Re: sample_stls

Jean, The format did not change for display objects. What extension does the file have? It should be ".hsf". If it is ".stl", then it must be taken into the Display Part Editor first, textured etc. then saved. Did you save this file into a directory under the Import folder in the...
by Scott G Vaal
Thu, May 15 2008, 8:29AM
Forum: Thermwood 3-Axis Machinery
Topic: MDF DOORS
Replies: 8
Views: 2833

Re: MDF DOORS

Gentlemen, There is an issue with Profile Modeler doing this additional offset incorrectly for the exterior profile when set to use "Custom Tool". This is listed and will be resolved for a future release of PM. I got Damon to cut the doors he needed by using a cabinet saved with just a bac...
by Scott G Vaal
Tue, May 13 2008, 10:31AM
Forum: eCabinet Systems Software
Topic: eCab 5.2 batch issues
Replies: 5
Views: 1950

Re: eCab 5.2 batch issues

Steve,

Do you typically have the job loaded that you run the CNC on? If so, would you run a test for me?
-> Start eCabs fresh.
-> Do NOT load the job!
-> Select the CNC Icon, choose this job and write it as you normally would.
...Does it crash?

Go to advanced search