Thermwood / eCabinet Systems

Jerry,

You can resize with the change size button without any problems as long as you understand the glitch that currently exists in Bld. 3 and make sure that the height is set back to what is needed. Make sure to keep in mind that when the cabinet is set to a detached toe the height of the cabinet ...

Mark,

I wanted to let you know what I found with this issue. I can reproduce the part editor cut disappearing only if I change the right ends material from the batch area. If I change the right ends material in the cabinet editor itself, I do not get any problems. Here is what I have done to ...

Mark Hesketh wrote: oh... and i need to find a way to be able to edit cabinets without loosing my right gables... :wall: :wall: :wall:

Mark,

Sorry, I forgot to add this to my last post: Could you please post a cabinet and some steps that cause this right gable issue?

Mark,

I removed the part editor cuts from the right end, and added them back on and now it seems that the cabinet regenerates and resizes just fine for me. Please try the attached cabinet and see if you have the same behavior. I did notice that the left end believed it had part editor cuts on it ...

I am taking a seed cabinet that is 34.5" tall and resizing the width only. I have taken the detached toe into my figures. When I select the change size button it is telling me that the cabinet is 28.5" tall. If I change the height back to the 34.5 and the width to whatever I want it is changing the ...

Jeff,

I see the issue you mention here. This is just a display issue for height of detached toe cabinets and will only affect the cabinet if you select the \"Change Size\" button when placing it into a room. (batch cabinets do not present this problem) If you do not select change size, it will ...

Jay, Here is the file zipped up. Maybe you will have better luck with it.

Ray,

Was this cabinet ever saved off from a room or batch?

Jay,

It appears that the negative inset for the deck (and combo with detached toe possibly as well) is the primary culprit here. (This is not a new issue) I will give this scenario to the programmers and have them fix it for a future release.

I modified the cabinet so that it does not use a ...

I've just noticed that I no longer show nor machine drawer slide holes on my cabinets. Have i missed something? a bug in the latest build? If not how do I get them back? The hole pattern is associated to the slide in the cabinet defaults.

Ray,

We had a issue where hole pattern associations would ...

Rick,

The issue with this cabinet has to do with the fact that the drawer boxes had a minimum depth increment set to 22\". This worked OK with the current back's material thickness and drawer box back inset of 1.625”. Now, when you change the back to a thicker material, it can no longer accomplish ...

Zach,

I want to get to the bottom of this for you! I am looking at your \"Diperna\" job and the nest looks correct in eCabinets and also looks ok for me at control nest (first glance anyway). Would it be possible for you to pin point one of the cabinets that presents this problem? That would help ...

Hey Hows it all going?

•Part editor hole placed in the corner of a blind dado (and has the exact same depth as the dado) can cause an error message “Error creating route bodies” and then it will lose part editor cuts on that part. (FIXED)


I reported this prob i had.

1 thing i want 2 point out ...

Darrel,

The documentation explains that incorrectly. It will by design collapse the cab when going to drawings. I will have them updated the documentation. Lamar's post is obviously the correct way to explode when you do not have a wheel.

Jim,

I case you are unaware of this option: If you set a door up as a \"build in house\", you will get sizes of the individual parts in the cut list. Make sure you set your \"default 5 piece door details for cut list\" settings to match the way you make your door. This is found under settings ...