Search found 266 matches

by Georgi Baltov
Tue, Aug 14 2007, 10:05AM
Forum: Thermwood 3-Axis Machinery
Topic: Tool Changing Problem - Important
Replies: 8
Views: 1250

A technician is coming today to replace the broken holder. I will ask him to check any possible sensors that might have caused that. Thanks for the feed back guys. I appreciate it.
by Georgi Baltov
Tue, Aug 14 2007, 6:46AM
Forum: Thermwood 3-Axis Machinery
Topic: Tool Changing Problem - Important
Replies: 8
Views: 1250

Re:

Did you change the tool position for the bit that was in the machine in the course of getting set up. If the machine has a tool that came from position 4 (or any other position) and you change the position of the tool while it is in the head it will try to put it down into the new position resultin...
by Georgi Baltov
Tue, Aug 14 2007, 6:33AM
Forum: Thermwood 3-Axis Machinery
Topic: Tool Changing Problem - Important
Replies: 8
Views: 1250

It's kind of funny because guys from Therwood said the machine just doesn't do that. And then I come to the forum and I see all these \"tool release\" problems. All I know is that I didn't change anything when I went to run the rebuilt program and the machine released and measured every to...
by Georgi Baltov
Mon, Aug 13 2007, 5:19PM
Forum: Thermwood 3-Axis Machinery
Topic: Tool Changing Problem - Important
Replies: 8
Views: 1250

Tool Changing Problem - Important

Well we've had our 3 axis Therwood machine for about 6 months now and so far everything has been ok. Today I was cutting some dovetail drawer boxes and I switched tool #7 with the dovetail bit, measured it and went in controll nesting to load the boxes. I wrote the CNC code and started the program. ...
by Georgi Baltov
Thu, Aug 09 2007, 12:54PM
Forum: eCabinet Systems Software
Topic: Dado Ramp Length
Replies: 3
Views: 479

BTW there's an option in Settings in Controll Nesting that deals with plunge to dado pre-ramp depth so that you can avoid the up-cut of your tool before it starts cutting the dado. Just go and change that. It should help. Measure the up-cut lengh of your tool and add +0.006 to that lenght. Of course...
by Georgi Baltov
Thu, Aug 09 2007, 12:46PM
Forum: eCabinet Systems Software
Topic: Dado Ramp Length
Replies: 3
Views: 479

The machine always ramps but it can ramp in lenght or width of the dado cut. So if it ramps in width it almost seems that it plunges. We are using a 3/4\" bit to do a dado for our cabinet backs (we end up with a 1/2\" room at the back for a split batten so we can hang the uppers on the wal...
by Georgi Baltov
Thu, May 10 2007, 9:16AM
Forum: eCabinet Systems Software
Topic: Problem with Drawer Box Nesting in 5.1 Bld 2 - Out of Border
Replies: 7
Views: 928

Well it seems that ecab bld 3 did fix my error and now nesting is done in a proper way but I see so many bugs and errors that people are generating with the new build. Hopefully it will be only a private case and I will not get those errors just as it was a private case with my \"out of border\...
by Georgi Baltov
Wed, Apr 18 2007, 9:59AM
Forum: eCabinet Systems Software
Topic: Problem with Drawer Box Nesting in 5.1 Bld 2 - Out of Border
Replies: 7
Views: 928

Is anyone still working on my problem?
by Georgi Baltov
Mon, Apr 16 2007, 8:14AM
Forum: eCabinet Systems Software
Topic: Problem with Drawer Box Nesting in 5.1 Bld 2 - Out of Border
Replies: 7
Views: 928

I still keep getting that same mistake on the program. Now I know that it's not a programing error but I don't really know how to fix it. I tried searching for any leftovers from the program on the hard disk and then uninstalling them and then installing the program again but nothing works. I was ho...
by Georgi Baltov
Mon, Apr 09 2007, 7:54PM
Forum: eCabinet Systems Software
Topic: Problem with Drawer Box Nesting in 5.1 Bld 2 - Out of Border
Replies: 7
Views: 928

Re:

I must have missed something. It seems like drawers are nesting correctly in version 5.1 build 2 unless there is a problem going to a router that I don't know anything about. Maybe someone else can shed some light on this. Kerry Well I think that the problem is in the program itself. I tried today ...
by Georgi Baltov
Mon, Apr 09 2007, 5:47PM
Forum: eCabinet Systems Software
Topic: Problem with Drawer Box Nesting in 5.1 Bld 2 - Out of Border
Replies: 7
Views: 928

Problem with Drawer Box Nesting in 5.1 Bld 2 - Out of Border

I don't know how many people are using 5.1 bld 2 and why so far no one has posted anything about the problem with drawer box nesting. We know that Thermwood knows about the problem but if they are not going to fix it soon they can advise us how to cope with it. Most of the cabinets I have designed a...

Go to advanced search