Search found 214 matches

by Larry Epplin
Mon, Mar 22 2010, 3:07PM
Forum: Thermwood 3-Axis Machinery
Topic: Manual panel input error.
Replies: 3
Views: 685

Re: Manual panel input error.

We have reproduced this problem. It will be fixed in the next update.
by Larry Epplin
Thu, Mar 18 2010, 10:14AM
Forum: eCabinet Systems Software
Topic: Furniture libraries?
Replies: 3
Views: 683

Re: Furniture libraries?

Right now there are no longer plans to support these furniture libraries due to the difficulties users have found understanding the designs. If you are still interested in these files you can contact Thermwood support to get the files.
by Larry Epplin
Wed, Mar 10 2010, 1:33PM
Forum: eCabinet Systems Software
Topic: Import Batch From Excel
Replies: 12
Views: 1585

Re: Import Batch From Excel

Sean,

The old way was not correct. If you would have added more than 9 items you would have gotten undesired results. As I stated previously we will work on a feature to provide user selected sorting which will include an option to hold items in the order they were inserted.
by Larry Epplin
Wed, Mar 10 2010, 9:07AM
Forum: eCabinet Systems Software
Topic: Import Batch From Excel
Replies: 12
Views: 1585

Re: Import Batch From Excel

Just to add a little extra insight to what has occurred here. Batch did not hold the order of items in excel with previous versions. Entering more than nine items caused the order to mix up. This was a bug. We implemented an alphabetical sort as well as a means to keep cabinets and assemblies groupe...
by Larry Epplin
Thu, Feb 25 2010, 1:44PM
Forum: eCabinet Systems Software
Topic: Build2 1b
Replies: 4
Views: 695

Re: Build2 1b

Derrick, I do not recommend going forward with a system restore. I do recommend downloading the latest Version 6 Build 2 installer and running it. (NOTE: If you get the option to Repair. then select this option) This will insure the application runs properly after doing a Windows System Restore. Unl...
by Larry Epplin
Thu, Feb 25 2010, 11:35AM
Forum: eCabinet Systems Software
Topic: Build2 1b
Replies: 4
Views: 695

Re: Build2 1b

Not necessary. It is only an installer change.
by Larry Epplin
Mon, Feb 22 2010, 9:29AM
Forum: Thermwood 3-Axis Machinery
Topic: Machine computer too slow
Replies: 13
Views: 1578

Re: Machine computer too slow

Thank you for the info. The reason you are seeing a difference on the other machine is due to the amount of data. There must have been more parts with more operations nested on the newer machine. We will change the way this data is stored to eliminate this excessive load for the application.
by Larry Epplin
Sat, Feb 20 2010, 1:32PM
Forum: Thermwood 3-Axis Machinery
Topic: Machine computer too slow
Replies: 13
Views: 1578

Re: Machine computer too slow

Georgi, we have made a discovery that the saving of part data for the new recut option may be causing some excessive load for Control Nesting. Try this to see if it is the culprit. Reinstall the latest version of Control Nesting. Go to Settings and set the days to save to zero. Then go to the Load s...
by Larry Epplin
Fri, Feb 12 2010, 10:22AM
Forum: eCabinet Systems Software
Topic: V5.2 Date
Replies: 1
Views: 477

Re: V5.2 Date

Yes an extension will be made available to users for 5.2 until June 1st to help users better make the transition to V6. We also plan Build 2 for V6 soon. I'm sure users have many question about Build 2, but all information will be provided when it becomes available.
by Larry Epplin
Thu, Feb 04 2010, 11:22AM
Forum: eCabinet Systems Software
Topic: Wilsonart laminates missing
Replies: 3
Views: 570

Re: Wilsonart laminates missing

The updates page provides a link to an installer that will add additional images. These are the images that used to be in the full install, but were removed to decrease the size. Look under Additional Images on this page.

http://www.ecabinetsystems.com/ecabinet ... pdates.htm
by Larry Epplin
Thu, Feb 04 2010, 10:55AM
Forum: eCabinet Systems Software
Topic: Hardware favorites
Replies: 5
Views: 716

Re: Hardware favorites

You can still set up a hardware item as well so your Buy List will be correct. Now that you can input your own pricing it will also be accurate in regards to where you do your purchasing. eCabinets always had the ability to set edges on a single part differently for KD. The new interface just makes ...
by Larry Epplin
Thu, Feb 04 2010, 10:05AM
Forum: eCabinet Systems Software
Topic: Hardware favorites
Replies: 5
Views: 716

Re: Hardware favorites

Just select the pattern you want to use. It eliminates the need to establish associations. This makes the process much simpler.
by Larry Epplin
Thu, Feb 04 2010, 9:02AM
Forum: eCabinet Systems Software
Topic: Hardware favorites
Replies: 5
Views: 716

Re: Hardware favorites

These areas were eliminated with Version 6. The Favorites becomes unnecessary now that you can simply maintain your hardware items yourself. There is no need to keep all items you do not use in the system now that the store has been removed.
by Larry Epplin
Thu, Feb 04 2010, 8:59AM
Forum: eCabinet Systems Software
Topic: Associate a hole pattern
Replies: 4
Views: 772

Re: Associate a hole pattern

The concept of hole pattern associations has been a confusing area for eCabinet Systems for quite some time. It sounds basic, but when you offer the flexibility of sending cabinets to any pc with eCabinets it becomes a complicated process. This has plagued the application for years. By removing this...
by Larry Epplin
Tue, Jan 26 2010, 9:33AM
Forum: eCabinet Systems Software
Topic: V 6 locking up my pc
Replies: 11
Views: 1391

Re: V 6 locking up my pc

You make a valid point Kenneth. Luckily eCabinets does not load all the information on each cabinet when filling the Item Window. It only loads a portion of the data that contains basic information. We are optimizing when this list is refreshed to avoid the unnecessary work for the application.

Go to advanced search