Search found 76 matches

by KyleHepp
Sat, May 26 2007, 5:25PM
Forum: eCabinet Systems Software
Topic: part editor functions
Replies: 13
Views: 1342

Anyone still here? I have tried to walk through this in eCabinetSystemsMadeEasy. I go into contour mode, manually enter the three coordinates which gives me the arc I want, switch to line mode and even MANUALLY enter every point to make sure that I am truly connected together... Then there's NOPLACE...
by KyleHepp
Sat, May 26 2007, 4:10PM
Forum: eCabinet Systems Software
Topic: OK so NOW which editor do I need to be in!
Replies: 5
Views: 703

just a quick thought, how about using door designer and making a 5 piece rail and stile door. eliminating everything but one stile, taking that stile into parts editor, where the stop flutes can be plotted out by coordinates? then a stop flute column could be made by adding a \"door\" to y...
by KyleHepp
Sat, May 26 2007, 4:03PM
Forum: eCabinet Systems Software
Topic: OK so NOW which editor do I need to be in!
Replies: 5
Views: 703

OK so NOW which editor do I need to be in!

i'd now like to create stop fluted appliques to the fronts of my bow columns. I cant add moulding vertically... -I cant easily \"equalize\" 0.25\" deep plows that make up a stop flute. -I don't want to use a porter cable router for this ANYMORE. I guess reed columns would be the next ...
by KyleHepp
Sat, May 26 2007, 3:18PM
Forum: eCabinet Systems Software
Topic: ceiling attributes
Replies: 6
Views: 890

So that is done in a \"display cube\"? That is a perfect example of what I need to place into my design layout. Can you set this to illustrate exactly where the door and stair swings? (or where a typical passage door OR cabinet door would swing) for the purpose of designing with respect to...
by KyleHepp
Sat, May 26 2007, 3:12PM
Forum: eCabinet Systems Software
Topic: part editor functions
Replies: 13
Views: 1342

exactly 8)
by KyleHepp
Sat, May 26 2007, 1:52PM
Forum: eCabinet Systems Software
Topic: part editor functions
Replies: 13
Views: 1342

I was trying to use geometric shapes. My actual parts I'm trying to modify is this: a 10.58x10.58 shelf. It is one of the 3 fixed shelfs in an angled front corner cabinet. Since it is an angled front corner cab, the shelf would best be described as a 10.5x10.5 square that you cropped off at a 45 deg...
by KyleHepp
Sat, May 26 2007, 1:27PM
Forum: eCabinet Systems Software
Topic: part editor functions
Replies: 13
Views: 1342

part editor functions

I am using the parts editor to try to radius the corners OFF of a square. The parts are fixed shelves in an angle front cabinet. for all practical purposes lets view one of the shelves as a 14x14 square. suppose I want to change one of the 90 deg. corners to a 3\" radius ( where normally a jigs...
by KyleHepp
Sat, May 26 2007, 12:28AM
Forum: eCabinet Systems Software
Topic: corner cabs and parameters
Replies: 9
Views: 1157

well....... :roll: I have a cabinet designed and saved. (and by that I mean \"one\" cabinet) I think I understand now why noone chimed right in and said \"do this, this, that, this and click enter!\" Everytime I think I start to get a feel for the relationships though, at least o...
by KyleHepp
Fri, May 25 2007, 4:44PM
Forum: eCabinet Systems Software
Topic: corner cabs and parameters
Replies: 9
Views: 1157

OK Sean, I think I see where the functions to do this exist, however I keep coming up with a back that is too narrow only, and cannot get the deck/top to angle back and connect. Also, I can't really get a feel for what the \"front angle back, back miter\" and so on do, since for some reaso...
by KyleHepp
Fri, May 25 2007, 10:44AM
Forum: eCabinet Systems Software
Topic: corner cabs and parameters
Replies: 9
Views: 1157

xxxxxxxxxx
x--------------x
x-----------------x
x-------------------x
x----------------------x
xxxxxxxxxxxxxxxxxxx
by KyleHepp
Fri, May 25 2007, 10:41AM
Forum: eCabinet Systems Software
Topic: corner cabs and parameters
Replies: 9
Views: 1157

maybee I'm being too ambiguous... Let's say for example I want a tall cabinet that is angled at 45 degrees on it's right side. ------------------------- - - - - - - - - - - -------------------------------------- sorry for the crudeness, but this should give a quick and dirty illustration of the top/...
by KyleHepp
Fri, May 25 2007, 10:33AM
Forum: eCabinet Systems Software
Topic: drawer box + stretchers = ? for placement
Replies: 3
Views: 539

I just returned to this thread, and am happy to see I'm on the same wavelength! That was the first thing I tried, but I attempted to delete the fixed shelves, and thought I was going to replace them with stretchers. -I didn't think to adjust backset instead! Thanks! Oh, one more thing... Where do yo...
by KyleHepp
Fri, May 25 2007, 10:06AM
Forum: eCabinet Systems Software
Topic: drawer box + stretchers = ? for placement
Replies: 3
Views: 539

drawer box + stretchers = ? for placement

I'm trying to load drawer boxes into a drawer base, I have placed stretchers to an \"almost\" equalized spacing increment. I have entered insets and still can't get the drawer boxes to fit into the correct location? they either install too high, too low, -sometimes right over the top of a ...
by KyleHepp
Thu, May 24 2007, 10:56PM
Forum: eCabinet Systems Software
Topic: corner cabs and parameters
Replies: 9
Views: 1157

corner cabs and parameters

I need to design several different seed cabs that are NOT square boxes. I have been trying to do this based on corner cabinets from the standard directory. The \"corner\" tab in the construction area gives alot of options and flexibility, but I can't seem to figure out how to get the basic...
by KyleHepp
Thu, May 24 2007, 12:21PM
Forum: eCabinet Systems Software
Topic: ceiling attributes
Replies: 6
Views: 890

For quick & dirty, that works. Is there a way to make an actual ceiling, edit ceiling and insert items into that ceiling (eg. door/jamb/casing)

I'm wondering if the \"Z\" axis might allow for this?

Go to advanced search