Thermwood / eCabinet Systems

Most hotels and such only allow Wi-Fi or Ethernet connection. I haven’t heard of any that allow free dial-up access. I have heard that connecting modem to a digital phone line can damage your modem because the digital line uses a higher current.

Standard CAT 5 cable will do fine. Most places seem to have wi-fi as well.

You need to make sure you run the patch as a administrator.

http://ntc.thermwood.com/forums/viewtop ... f=3&t=6523

Looks to be a problem with the mid style.
If you delete the drawer, mid style and rail, then added them back everything seems to work properly.

Can you post your ecabinets.ini file? There might be a bad grid setting for the shape manager.

Rerun the 5.2 update and let it uninstall. then run it again and let it reinstall.

Your drawer front still has a slide pattern associated to it. Clear the Drawer Slide from your cabinet defaults and regen the cabinet.

Those colors are available to purchase on Conestoga Doors and Drawers that are listed on http://www.woodworkerswholesale.com/. I think the goal was to integrate the new colors in v6.0.

Putting the suggestion in through the Commutations and Feedback link ensures that the suggestion is recorded in the proper place. Putting the suggestion on the forum does allow other users to add their input, but it is always possible the suggestion will not be recorded and there for it could be ...

The shelf that you are talking about does have the materail "3/4 divider do not cut" set on it from the get go. It is not jumping, however the jpg for that materail maybe. When I first open the job, the "3/4 divider do not cut" missing materail dialog came in as the same texture as the other ...

Please send the job to cabinets@thermwood.com. Please put in the email subject line Materail Jump Issue for Forum. Thanks.

Well with that being the case if you still have a version of the cabinet that has this problem, please post it. It is something that should be looked into. Thanks.

Going back into the job batch, pulling the cab into the cab editor, the offending shelf read right, material wise. I selected it and the material spec read hardrock maple. Back to nesting over again, it popped into the wrong stuff again.


When you say the offending shelf read right, do you mean ...

Actually, simply allowing cabinets and assemblies to be saved in any location (just as jobs can be now) would accomplish this.

feature in the works for v6.0

I found the bug. It has to do with the Left Right Stetcher/ Right Stile part order. If you delete any thing, it reorganizes the parts and puts the right stile ahead of the left right stretcher so things work again. This will be fixed for v5.2. Sorry for the trouble.