Search found 215 matches

by tim lucas
Tue, Nov 28 2017, 9:40PM
Forum: eCabinet Systems Software
Topic: Nesting discrepancy
Replies: 11
Views: 207

Re: Nesting discrepancy

But if you go in settings and change one little thing like, part clearance or collar it should change everything as it may be able to save another square inch :-)
by tim lucas
Mon, Nov 27 2017, 4:52PM
Forum: eCabinet Systems Software
Topic: Nesting discrepancy
Replies: 11
Views: 207

Re: Nesting discrepancy

Hi Tim,

Its always been like that with me. I always get a better nest at the control computer. then once I nest at the control computer I print my sheets and labels. As long as I do not re-nest it stays the same but I have found if I nest again it can change.
Tim
by tim lucas
Sun, Nov 12 2017, 9:31PM
Forum: eCabinet Systems Software
Topic: Countertop - Over a Corner Cabinet
Replies: 10
Views: 216

Re: Countertop - Over a Corner Cabinet

No, from what I read you can mimic a base with an upper and I have before, but there is no way to change it.
by tim lucas
Sun, Nov 12 2017, 9:07PM
Forum: eCabinet Systems Software
Topic: Countertop - Over a Corner Cabinet
Replies: 10
Views: 216

Re: Countertop - Over a Corner Cabinet

It shows it is an upper cabinet not a base. I can upload one if you need it

Tim
by tim lucas
Sun, Nov 12 2017, 8:56PM
Forum: eCabinet Systems Software
Topic: Countertop - Over a Corner Cabinet
Replies: 10
Views: 216

Re: Countertop - Over a Corner Cabinet

can you upload the cabinet
by tim lucas
Sun, Nov 12 2017, 8:30PM
Forum: eCabinet Systems Software
Topic: Countertop - Over a Corner Cabinet
Replies: 10
Views: 216

Re: Countertop - Over a Corner Cabinet

That is strange, have you tried to delete the cabinet then put it back in??

What about a new room with just one wall and that one cabinet??
by tim lucas
Sun, Nov 12 2017, 8:09PM
Forum: eCabinet Systems Software
Topic: Countertop - Over a Corner Cabinet
Replies: 10
Views: 216

Re: Countertop - Over a Corner Cabinet

I don't select a wall when I go to countertops, I just go - maybe that is why its not showing ????

Tim
by tim lucas
Sun, Nov 12 2017, 7:12AM
Forum: eCabinet Systems Software
Topic: Drawing Closet Systems
Replies: 6
Views: 156

Re: Drawing Closet Systems

Good morning Nat, Yes ecabinets can be used for closet cabinets quickly and easily. Think of your cabinet in this way, I took a standard wall cabinet added partitions and now you have inside sides shared. Just add fixed shelves and adjustable shelves where you want. You can resize it and it will all...
by tim lucas
Wed, Nov 08 2017, 7:45PM
Forum: eCabinet Systems Software
Topic: two level floor / not perfect but works for show
Replies: 3
Views: 180

Re: two level floor / not perfect but works for show

Thanks Tim, I know Ecabs was not intended for design purposes and mainly CNC software but you can't beat the the visual capabilities it allows for a presentation. My customers really like the visual aspect of the design and I'm slowly getting the hang of how to use Ecabs for the presentation withou...
by tim lucas
Tue, Nov 07 2017, 7:49PM
Forum: eCabinet Systems Software
Topic: two level floor / not perfect but works for show
Replies: 3
Views: 180

Re: two level floor / not perfect but works for show

Good presentation and nice clean look

Tim
by tim lucas
Thu, Nov 02 2017, 7:47PM
Forum: eCabinet Systems Software
Topic: Cutlist Save/open button
Replies: 18
Views: 813

Re: Cutlist Save/open button

Yep there it is in Windows 7 Pro, how about that
by tim lucas
Thu, Nov 02 2017, 6:13AM
Forum: eCabinet Systems Software
Topic: Working with End Panels
Replies: 4
Views: 200

Re: Working with End Panels

Ok I brought a base cabinet into the editor selected Doors/Drawers on the right side menu, added a Conestoga CRP10 door sized 24w by 29.5H (I have a 5" toe) aligned the door to the right side, unchecked all cabinet parts. That left just the door on the right side. Saved cabinet, created a room ...
by tim lucas
Wed, Nov 01 2017, 7:07AM
Forum: eCabinet Systems Software
Topic: Working with End Panels
Replies: 4
Views: 200

Re: Working with End Panels

Good morning,

Are you creating a display door like this and then using the align function ?

This cabinet has a 1" scribe on both sides and I added a display door and aligned it to the scribe on the left.

Tim

cab.jpg
by tim lucas
Thu, Oct 26 2017, 7:43PM
Forum: eCabinet Systems Software
Topic: Is there a way to make doors with sheet stock panels ?
Replies: 8
Views: 358

Re: Is there a way to make doors with sheet stock panels ?

Here is a slab door cabinet that will nest with the cabinet parts - all 3/4 plywood
Std Upper Framed.jpg
Std Upper Framed.jpg (13.93 KiB) Viewed 280 times
Std Upper Framed.hsf
(290.02 KiB) Downloaded 11 times

Tim
by tim lucas
Tue, Oct 24 2017, 6:45PM
Forum: eCabinet Systems Software
Topic: Is there a way to make doors with sheet stock panels ?
Replies: 8
Views: 358

Re: Is there a way to make doors with sheet stock panels ?

Welcome Andy,

Yes you can by creating a board stock item with the same specs as sheet stock.

Tim

Go to advanced search