Search found 222 matches

by tim lucas
Wed, Dec 30 2015, 11:52AM
Forum: eCabinet Systems Software
Topic: A couple of issues I need to solve with this cab design
Replies: 5
Views: 2882

Re: A couple of issues I need to solve with this cab design

Try the stretchers you will have to Play with it a little but I added one and gave it a negative inset to put it outside the cabinet and then lock the top and bottom inset and it resized with the cabinet
by tim lucas
Tue, Dec 29 2015, 8:08PM
Forum: eCabinet Systems Software
Topic: A couple of issues I need to solve with this cab design
Replies: 5
Views: 2882

Re: A couple of issues I need to solve with this cab design

Hello To add the backing strips - in cabinet editor, add display panels of your choice wood and size. By adding display panels they will be set in your cut list and nested You can use the part editor to rabbit the back of the face frame if you want to see it but otherwise when setting your panel you...
by tim lucas
Sat, Dec 26 2015, 8:30AM
Forum: eCabinet Systems Software
Topic: Sloped vent hood top
Replies: 5
Views: 3429

Re: Sloped vent hood top

Tony You are correct, you can not save 2 cabinets as 1 but your assembly will work just like a cabinet in your room As I said I did not cut my hood it was for show only. I looked at yours and if that is what you need then it is just right. If you are planning to cut it out and build it I might sugge...
by tim lucas
Wed, Dec 23 2015, 9:24PM
Forum: Customer 3D Files
Topic: want to create 3d item
Replies: 4
Views: 9488

Re: want to create 3d item

Thank you Mark, Yes Kerry spoke about Accu Trans 3D and I am trying to learn on it but I don't really understand 3D I have not been able to find a DXF or STL file to import for the wood rack, did you draw yours from scratch? I downloaded the HSF files and will play with them Thank you again Tim
by tim lucas
Tue, Dec 22 2015, 7:30AM
Forum: eCabinet Systems Software
Topic: Sloped vent hood top
Replies: 5
Views: 3429

Re: Sloped vent hood top

Here is the file for it
Hood 32.hsf
(198.02 KiB) Downloaded 157 times


I just used the rotate tool and part editor to create the look of the hood - I did not cut the hood out from this file

Tim
by tim lucas
Mon, Dec 21 2015, 8:04PM
Forum: eCabinet Systems Software
Topic: Sloped vent hood top
Replies: 5
Views: 3429

Re: Sloped vent hood top

t w fortier wrote:Hi...
Is there a way to slope the top of a vent hood in ecabinet or door ?
tony


Is this what you mean?
W3612 Vent Hood.jpg
W3612 Vent Hood.jpg (10.51 KiB) Viewed 3408 times

or
Hood 32.jpg
Hood 32.jpg (9.48 KiB) Viewed 3408 times


Tim
by tim lucas
Thu, Dec 17 2015, 10:32AM
Forum: Customer 3D Files
Topic: want to create 3d item
Replies: 4
Views: 9488

want to create 3d item

Many times George D. has created 3d items for myself and others but I would like to learn a little so...

I have searched the web for a DXF or STL file of a under cabinet wine glass rack no find :(

how would I start to create this ??

glass holder.jpg
glass holder.jpg (5.05 KiB) Viewed 9488 times


Thanks
Tim
by tim lucas
Tue, Dec 15 2015, 5:26PM
Forum: eCabinet Systems Software
Topic: snap resolution
Replies: 3
Views: 2479

Re: snap resolution

The only thing I can think of is in the "Drafting Parameters" you could set Round to nearest inch = 1.0
Capture.PNG

right click on page for Drafting Parameters

Maybe that will help

Tim
by tim lucas
Mon, Dec 14 2015, 7:49PM
Forum: eCabinet Systems Software
Topic: Phantom circles on corner units
Replies: 7
Views: 3685

Re: Phantom circles on corner units

Ok I think your on to something - I loaded a corner cabinet from the standard library and I CAN reproduce the circles :shock:

so it must have something to do with that library of cabinets and the gremlins are still running loose :(

Tim
by tim lucas
Sat, Dec 12 2015, 9:01AM
Forum: eCabinet Systems Software
Topic: Phantom circles on corner units
Replies: 7
Views: 3685

Re: Phantom circles on corner units

Not seeing it here
1.jpg
by tim lucas
Sat, Dec 12 2015, 8:55AM
Forum: eCabinet Systems Software
Topic: Interior walls
Replies: 4
Views: 2808

Re: Interior walls

Tim, Thank you. That helps. Do you know if there is any way to get dimension lines to these interior walls. Not sure what you mean, should look like this Capture.PNG Or if you need more, you can take the layout into the "Line Drawing Editor" and add all the measurments Capture2.PNG Tim
by tim lucas
Fri, Dec 11 2015, 8:13AM
Forum: eCabinet Systems Software
Topic: Interior walls
Replies: 4
Views: 2808

Re: Interior walls

If you set your starting point to 0,0 to start building your walls you can calculate where you need your interior walls

and if you turn on your snap and set it to 1 inch it will make it a little easier

hope this helps

Tim
by tim lucas
Thu, Dec 10 2015, 8:13PM
Forum: eCabinet Systems Software
Topic: Tenon cleanup
Replies: 9
Views: 4513

Re: Tenon cleanup

For what it's worth. There is a beta version of the link 1.0.21 Beta 1. If you use a ShopBot you should use this version. If tenons are too long you might try setting the dado depth clearance deeper when you create your cabinet, if the tightness of your machine is similar to the tolerances you set ...
by tim lucas
Thu, Dec 10 2015, 7:48AM
Forum: eCabinet Systems Software
Topic: Tenon cleanup
Replies: 9
Views: 4513

Re: Tenon cleanup

I cut the pocket with a 1/4" down and use a compression for the outline
It seems like the pocket should cut out a little more

Thanks
Tim
by tim lucas
Wed, Dec 09 2015, 5:01PM
Forum: eCabinet Systems Software
Topic: Tenon cleanup
Replies: 9
Views: 4513

Tenon cleanup

Using a blind dado for a joint and the tenon needs lots of cleanup

In the Shopbot link, is the pocket tool setup used to clean it up?
IMG_20151209_164337953.jpg

Capture.PNG


Thanks
Tim

Go to advanced search