Search found 215 matches

by leigh mills
Wed, Aug 06 2008, 3:41AM
Forum: eCabinet Systems Software
Topic: Door/Drawer Editor Feedback
Replies: 15
Views: 3621

Door/Drawer Editor Feedback

Hi, I have spoken to the programmers regarding a fix for the Door/Drawer Editor, they said if they get enough feedback, this issue will be looked at. So if anyone else is facing this issue or something similar can you post a feedback comment. Issue: The doors which we design are not supported within...
by leigh mills
Tue, Aug 05 2008, 8:21AM
Forum: eCabinet Systems Software
Topic: DXF to Line Drawer Editor
Replies: 6
Views: 997

Re: DXF to Line Drawer Editor

15.75" by 10.9"
by leigh mills
Tue, Aug 05 2008, 7:44AM
Forum: eCabinet Systems Software
Topic: DXF to Line Drawer Editor
Replies: 6
Views: 997

Re: DXF to Line Drawer Editor

I cant attach a dxf file as its not allowed
by leigh mills
Tue, Aug 05 2008, 7:22AM
Forum: eCabinet Systems Software
Topic: DXF to Line Drawer Editor
Replies: 6
Views: 997

DXF to Line Drawer Editor

I am creating a template in Turbo Cad so I can use the template in the Line Drawing Editor, I sized it up correct in turbo cad but when inputing into drawing editor it was very small, you can hardly see it. I have only just started to create a template, so is this the only way to do. I need to open ...
by leigh mills
Wed, Jul 23 2008, 8:17AM
Forum: Thermwood 3-Axis Machinery
Topic: "X Axis Out of Bounds"
Replies: 7
Views: 2808

Re: "X Axis Out of Bounds"

ok thanks Todd, I will go and give this a go.
by leigh mills
Wed, Jul 23 2008, 7:42AM
Forum: Thermwood 3-Axis Machinery
Topic: "X Axis Out of Bounds"
Replies: 7
Views: 2808

Re: "X Axis Out of Bounds"

X = 2451.172mm
Y = 03411.772mm

Thanks Todd
by leigh mills
Wed, Jul 23 2008, 4:19AM
Forum: Thermwood 3-Axis Machinery
Topic: "X Axis Out of Bounds"
Replies: 7
Views: 2808

"X Axis Out of Bounds"

I am trying to nest our first job but am coming accross an error which is "X Axis Out Of Bounds". The error is coming on line G00 X1033.3754 Y2042.6247. I have created a simple job and attached it for an example. I have set a fixture offset which I input into sheet operations and flip oper...
by leigh mills
Wed, Jul 23 2008, 3:24AM
Forum: Thermwood 3-Axis Machinery
Topic: "X Axis Out of Bounds"
Replies: 7
Views: 2808

"X Axis Out of Bounds"

I am trying to nest our first job but am coming accross an error which is "X Axis Out Of Bounds". The error is coming on line G00 X1033.3754 Y2042.6247. I have created a simple job and attached it for an example. I have set a fixture offset which I input into sheet operations and flip oper...
by leigh mills
Tue, Jul 22 2008, 3:33AM
Forum: eCabinet Systems Software
Topic: Grooving
Replies: 2
Views: 770

Grooving

I have a groove in both side panels so that my 8mm back slots into this. So the groove is from top to bottom and 8mm wide, 5mm deep. The thing is I dont have an 8mm wide tool set in my router so I'm not sure of how the machine will cut this, has anybody had any simular thing happen? Will it use my 6...
by leigh mills
Tue, Jul 22 2008, 3:04AM
Forum: eCabinet Systems Software
Topic: Materials
Replies: 5
Views: 1938

Re: Materials

This wont work this way as you can only match a material for the cabinet accross to the display panel and not the display panel to the cabinet. The only way I can find around this is to do a change materials when in the room layout, after the presentation has finished and then return to the cutting ...
by leigh mills
Mon, Jul 21 2008, 3:54PM
Forum: eCabinet Systems Software
Topic: Printing Labels
Replies: 3
Views: 816

Re: Printing Labels

Thanks guys, I didnt know it was posible to do this. Justin has gave me information within an email so I will give this a try, if I come accross any problems I will get in touch.

Thanks for your help.

Leigh Mills
by leigh mills
Mon, Jul 21 2008, 9:27AM
Forum: eCabinet Systems Software
Topic: Materials
Replies: 5
Views: 1938

Re: Materials

Ok so what your saying is if I am cutting from a material of say "Raw/Beech 18mm MDF" but in eCabinets I need to be able to attach colours so I would name it "Raw/Beech Amati 18mm MDF" so this is actually the same material but it shows its finished colour. So some parts in this c...
by leigh mills
Fri, Jul 18 2008, 9:50AM
Forum: eCabinet Systems Software
Topic: Materials
Replies: 5
Views: 1938

Materials

Hi guys I think I may have run into a problem with the materials that I have created. We are currently using around 6 different materials then we fininsh the material off with a film after cutting. So some of our materials are like so: Raw/Raw MDF 18mm Raw/Beech MDF 18mm MDF 18mm ..... So for me to ...
by leigh mills
Fri, Jul 18 2008, 4:32AM
Forum: eCabinet Systems Software
Topic: Printing Labels
Replies: 3
Views: 816

Printing Labels

I need some help with the labels. Before we can start nesting I need to set up the labeling, we wont be using the labeling which is installed in the software, as we need more information on larger labels. If anybody else is using this method would they be able to help me: We will be using Crystal Re...
by leigh mills
Wed, Jul 16 2008, 10:40AM
Forum: Customer 3D Files
Topic: Desk Accessories
Replies: 0
Views: 1736

Desk Accessories

Office Equipment - Pens, Telephones, Books, Note_Pad

Go to advanced search