Search found 43 matches

by Jon Kenworthy
Wed, Aug 26 2009, 2:21PM
Forum: Thermwood 3-Axis Machinery
Topic: A (hopefully simple) feature request
Replies: 6
Views: 1206

Re: A (hopefully simple) feature request

We had a job around a year ago that had a lot of pocketing operations that would take a long time to nest, we upped the RAM on the CNC to 2 gigs and that did the trick for us. I believe we had 512 megs of ram to start with also.
by Jon Kenworthy
Tue, Aug 25 2009, 2:49PM
Forum: eCabinet Systems Software
Topic: part editor wizards please reply!
Replies: 2
Views: 466

Re: part editor wizards please reply!

I wouldn't say I was a part editor wizard but I can maybe help on this one. I usually use a CAD program to draw the radius parts up and then save it as a DXF file. Create a display panel and take it to the contour editor, right click and select Load Geometry, then select the DXF file you created. Ta...
by Jon Kenworthy
Tue, Aug 11 2009, 11:46AM
Forum: eCabinet Systems Software
Topic: Machine time in WA.
Replies: 3
Views: 532

Re: Machine time in WA.

The following link is for the production sharing that Thermwood has available in Australia. I just wanted to make sure you were aware of this. There is a shop listed for Western Australia...http://www.thermwood.com/header/product ... tralia.htm
by Jon Kenworthy
Tue, Jul 28 2009, 4:31PM
Forum: eCabinet Systems Software
Topic: Refrigerator Cabinet
Replies: 15
Views: 1490

Re: Refrigerator Cabinet

Here is two 41 wide by 89 tall cabinets that only ask for 1 sheet each for the back in the nest. I made the frameless cabinet out of a base cabinet and the framed cabinet out of the standard cabinets that came with E-cabinets. You could try to use one of these or post the cabinet and someone could t...
by Jon Kenworthy
Tue, Jun 09 2009, 10:43AM
Forum: eCabinet Systems Software
Topic: Bottom Dado
Replies: 1
Views: 413

Re: Bottom Dado

Ted, here is a cabinet with a back stretcher with a blind dado into the bottom of the deck. I took the cabinet into the stretcher editor, added the stretcher, brought it back to the main cabinet editor, then brought it back to the stretcher editor, highlighted the stretcher, clicked on the add stret...
by Jon Kenworthy
Thu, May 28 2009, 9:13AM
Forum: eCabinet Systems Software
Topic: Adding Possitive edge banding
Replies: 4
Views: 686

Re: Adding Possitive edge banding

You can use negative insets for the edges you need the extra material on. For example, if you want an extra .015 on the front of the cabinet so it can be pre-milled on an edgebander, put a front inset of -.015 on your part.
by Jon Kenworthy
Thu, May 21 2009, 10:48AM
Forum: eCabinet Systems Software
Topic: Help: simple face framing
Replies: 6
Views: 774

Re: Help: simple face framing

Here's the assembly in a zipped file.
by Jon Kenworthy
Thu, May 21 2009, 10:08AM
Forum: eCabinet Systems Software
Topic: Help: simple face framing
Replies: 6
Views: 774

Re: Help: simple face framing

Here is a cabinet I built using negative insets and taking the cabinet into the part editor so the left and right end are one continuous piece. The bottom face frame part is a separate cabinet that had everything deleted except the face frame then the two cabinets were saved as an assembly like Dan ...
by Jon Kenworthy
Wed, May 13 2009, 1:11PM
Forum: eCabinet Systems Software
Topic: Round front vanity
Replies: 7
Views: 1313

Re: Round front vanity

Walzcraft out of LaCrosse, WI will build radius doors. http://walzcraft.com/
by Jon Kenworthy
Mon, May 11 2009, 3:05PM
Forum: eCabinet Systems Software
Topic: Alphabet
Replies: 8
Views: 1285

Re: Alphabet

I don't know if this will help you or not Neville. http://www.deskam.com/deskengrave.html Has anybody used this software for lettering. It looks like a good program, however once the letter files are saved as a DXF file I can't open it with our CAD software (AutoSketch). I tried to send the DXF fil...
by Jon Kenworthy
Mon, May 11 2009, 9:22AM
Forum: Thermwood 3-Axis Machinery
Topic: Corrupt OS file
Replies: 4
Views: 704

Re: Corrupt OS file

We had a similar problem a couple of months ago and we couldn't find the Restore CD anywhere in our office. Come to find out it is shipped in the low voltage side of the CNC controller (ours was in a manila envelope).
by Jon Kenworthy
Tue, Apr 21 2009, 2:43PM
Forum: eCabinet Systems Software
Topic: Selecting Multiple Objects in PE
Replies: 9
Views: 1018

Re: Selecting Multiple Objects in PE

3 cheers for the E-cabinets school. Dennis showed me how to do that a couple of years ago when I went to the training in Indiana.
by Jon Kenworthy
Mon, Apr 20 2009, 8:27PM
Forum: eCabinet Systems Software
Topic: Selecting Multiple Objects in PE
Replies: 9
Views: 1018

Re: Selecting Multiple Objects in PE

When you're in the shelf/partition editor, you can figure out about how many shelf holes it will take to get them all the way up the cabinet and enter this in for the amount of shelf holes up, place the first shelf, then uncheck the box in the construction settings where it says Apply Shelf holes an...
by Jon Kenworthy
Fri, Apr 17 2009, 5:48PM
Forum: eCabinet Systems Software
Topic: Unable to Delete Shape in Part Editor
Replies: 6
Views: 828

Re: Unable to Delete Shape in Part Editor

You can right click with this cabinet in the cabinet editor and select Remove Part Editor Cuts either from selected part or the entire cabinet.
by Jon Kenworthy
Thu, Mar 26 2009, 5:11PM
Forum: Customer 3D Files
Topic: Stool_Metal Pipe
Replies: 8
Views: 3166

Re: Stool_Metal Pipe

I'll take a 16 oz T-bone, medium rare. :lol:

About how much time do you have in this presentation? When we do presentations we mainly try to get the cabinets to look realistic and don't spend much time on the room. This is really impressive. Customers would really appreciate this amount of detail.

Go to advanced search